• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.2
• /
• pp.63-67
• /
• 2002

Langasite single crystal was grown by Xenon-arc floating zone method in mixutre of Af and $O_2$ gas atmosphere. Growing and rotation speed were 1.5 much and 15 rPm respectively. The grown crystal had a c-axis and color of orange. Composition of the grown crystal was $La_{3.10}Ga_{4.73}Si_{1.17}O_{14}$. Activation energy of the crystal was 0.23 eV and was PTC characteristics.

• Journal of Life Science
• /
• v.9 no.1
• /
• pp.9-13
• /
• 1999

Reduced thiols were important compounds for the maintenance of leukemia and lymphoma cell survival (and growth). In the course of examining the microenvirn-mental effects on lymphoma and leukemia cell growth, we found that cysteine suppressed apoptosis in these cells. In a present study, in order to investigate the role of cystein on the suppression of apoptotic cell death, we used CS21, P388, and L1210 cell lines. The addition of BSO, an inhibitor of glutathione synthase, induced apoptosis of these cells by blocking the cellular uptake of cysteine in CS21 cells. Although L1210 cells underwent apoptosis without thiol compounds, the addition of these compounds suppressed the apoptosis and promoted the growth or L1210 cells. When specific inhibitors of caspase3-like proteases, but not caspase1-like proteases, were activated during the L1210 cell apoptosis but the addition of thiol compounds suppressed the activation of caspase3-like proteases. These results suggest that reduced thiols including cysteine play an important role in the suppression of cell apoptosis by inhibiting the activation of caspase3-like proteases.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.3
• /
• pp.229-235
• /
• 2004

The influence of sucrose on in vitro growth, chlorophyll content, and rubisco/rubisco activase were studied in tobacco leaves. The most pronounced effect on in vitro growth and the chlorophyll content was found at 4% sucrose. The rubisco content increased with increasing concentrations of sucrose, but a point was reached beyond which the increasing concentrations of sucrose caused an inhibition of this enzyme. The rubisco activity showed patterns of change similar to the rubisco content. These data suggest that sucrose may have an affect on the activation and induction of rubisco and that sucrose can be both a positive effector and negative effector depend on its concentration. The degree of intensity of 55 and 15 kD polypeptides, which were identified as the large and small subunit of rubisco, respectively, by SDS-PAGE analysis at 4% sucrose was significantly higher than that of other treatments, indicating that sucrose had an effect on both subunits. We subsequently examined whether the rubisco content and activity of being induced by sucrose is associated with rubisco activase. The rubisco activase content at 4% sucrose was higher than that of other treatments. A similar change pattern was also observed in the activity of rubisco activase. The intensity of two 52 and 51 kD polypeptide bands at 4% sucrose was higher than that of corresponding bands of other treatments. The stimulatory and inhibitory effects of rubisco by sucrose seemed to be caused by rubisco activase.

• Journal of the Korean Ceramic Society
• /
• v.37 no.1
• /
• pp.50-56
• /
• 2000

Precursor gels with the composition of xZrO2·(100-x)SiO2 systems (x=10, 20 and 30 mol%) were prepared by the sol-gel method. Kinetic parameters, such as activation energy, Avrami's exponent, n, and dimensionality crystal growth value, m, have been simultaneously calculated from the DTA data using Kissinger and Matusita equations. The crystallite size dependence of tetragonal to monoclinic transformation of ZrO2 was investigated using XRD, in relation to the fracture toughness. The crystallization of tetragonal ZrO2 occurred through 3-dimensional diffusiion controlled growth(n=m=2) and the activation energy for crystallization was calculated using Kissinger and Matusita equations, as about 310∼325±10kJ/mol. The growth of t-ZrO2, in proportion to the cube of radius, increased with increasing heating temperature and hteat-treatment time. It was suggested that the diffusion of Zr4+ ions by Ostwald ripening was rate-limiting process for thegrowth of t-ZrO2 crystallite size. The fracture toughness of xZrO2·(100-x)SiO2 systems glass ceramics increased with increasing crystallite size of t-ZrO2. The fracture toughness of 30ZrO2·70SiO2 system glass ceramics heated at 1,100℃ for 5h was 4.84 MPam1/2 at a critical crystaliite size of 40 nm.

• Journal of Surface Science and Engineering
• /
• v.29 no.5
• /
• pp.325-329
• /
• 1996

We report on p-type arsenic doping of metalorganic vapor phase epitaxially (MOVPE) grown HgCdTe on (100) GaAs. HgCdTe was grown at $370^{\circ}C$ in a horizontal reactor with using dimethy-cadmium, diisoprophyltelluride, and elemental Hg. We used tris-dimethylaminoarsenic (DMAAs) as the metalorganic for p-doping. 4micron thick CdTe and subsequently 10micron thick HgCdTe were grown on (100) GaAs substrate. Interdiffused multilayer process in which thin CdTe and HgTe layers are grown alternately and interdiffused to obtain homogeneous HgCdTe alloys was used. Arsenic was doped during CdTe growth cycle. After growth HgCdTe was annealed at $415^{\circ}C$ for 15 min and then annealed again at $220^{\circ}C$ for 3 hr, both with Hg-saturate condition. We could obtain p-doping from 2.5$\times$$10^{16}$ to 6.6$\times$$10^{17}$$cm^{-3}$, depending on the DMAAs partial pressure. With the dual Hg-annealing, activation of arsenic was aboutt 90%, which was confirmed by SIMS measurement. With only low temperature annealing at $220^{\circ}C$ for 3hr, activation efficiency was about 50%.

• Journal of Surface Science and Engineering
• /
• v.49 no.3
• /
• pp.238-244
• /
• 2016

Copper electrodeposition on AZ91 Mg alloy was studied in views of preferential deposition on ${\alpha}$- or ${\beta}$- phases and how to achieve uniform deposition over the entire surface on ${\alpha}$- and ${\beta}$-phases in a cyanide solution. The inhomogeneous microstructure of AZ91 Mg alloy, particularly ${\alpha}$- and ${\beta}$-phases, was found to result in non-uniform deposition of zincate layer, preferential deposition of zincate on ${\beta}$-phases, which leads to non-uniform growth of copper layer during the following electrodeposition process. The preferential depositions of zincate can be attributed to higher cathodic polarizations on the ${\beta}$-phases. Pin-hole defects in the copper electrodeposit were observed at the center of large size ${\beta}$-phase particles which is ascribed to gas bubbles formed at the ${\beta}$-phases. The activation of AZ91 Mg alloy in hydrofluoric acid solution was used to obtain uniform growth of zincate layer on both the ${\alpha}$- and ${\beta}$-phases. By choosing an optimum activation time, a uniform zincate layer was obtained on the AZ91 Mg alloy surface and thereby uniform growth of copper was obtained in a cyanide copper electroplating solution.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.1
• /
• pp.5-16
• /
• 1991

It was grown Cubic $ZrO_2(10 mol% Y_2O_3)$ single crystals doped with 1 wt% rare earth metal oxides (RE=Ce, Pr, Nd, Eu, Er) by Skull method. It was investigated electrical properties on (111) plane of grown single crystals by Impedance Spectroscopy. It was potted relation between temperature and electrical conductivities and observed the transition at $약300-400^{\circ}$ It was obtained activation energy on the migration of oxygen vacancy between low temperature (before the transition) and high temperature (after the transition till ${\11}500^{\circ}$) and its difference can be seen the activation energy of the formation of oxygen vacancies by break up defect complexes. It was obtained the activation energy according as add yttria and rare earth metal oxides and discussed ionic conduction mechanism. Grown single crystals showed Ce: orange - red, Pr: golden - yellow, Nd: lilac, Eu: light pink, Er: pink due to dopant effect from the light absorption data in the visible range.

• Journal of Welding and Joining
• /
• v.25 no.2
• /
• pp.82-88
• /
• 2007

Sn-3.0Ag-0.5Cu lead fee solder was generally utilized in electronics assemblies. But it is insufficient to research about activation energy(Q) that is applying to evaluate the solder joint reliability of environmental friendly electronics assemblies. Therefore this study investigated Q values which are needed to IMC formation and growth of Sn-3.0Ag-0.5Cu/Cu and Sn-40pb/Cu solder joints during aging treatment. We bonded Sn-3.0Ag-0.5Cu and Sn-40Pb solders on FR-4 PCB with Cu pad$(t=80{\mu}m)$. After reflow soldering, to observe the IMC formation and growth of the solder joints, test specimens were aged at 70, 150 and $170^{\circ}C$ for 1, 2, 5, 20, 60, 240, 960, 15840, 28800 and 43200 min, respectively. SEM and EDS were utilized to analysis the IMCS. From these results, we measured the total IMC$(Cu_6Sn_5+Cu_3Sn)$ thickness of Sn-3.0Ag-0.5Cu/Cu and Sn-40Pb/Cu interface, and then obtained Q values for the IMC$(Cu_6Sn_5,\;Cu_3Sn)$ growth of the solder joints.

• Journal of Digital Convergence
• /
• v.13 no.12
• /
• pp.13-21
• /
• 2015

Ongoing advances in wireless broadband technologies can affect all of industrial society. As new wireless broadband technologies emerge, they will improve competition between established industries and their current services and produce new industries and new converged services. This paper analyzes the trend of next-generation wireless broadband and suggests ways of activating the industry further. To this end, we analyze the trend for previous wireless broadband industries and find out three influential factors (content, wireless network technology, and service) that will produce the continued growth of wireless broadband. Using these three factors, we propose a network technology-driven growth model. Based on that model, we offer activation plans for next-generation wireless broadband industries. This study thus provides an insightful perspective for next-generation wireless broadband industries by establishing additional useful guidelines for developing wireless broadband industries in the future.

• Molecules and Cells
• /
• v.20 no.2
• /
• pp.263-270
• /
• 2005

Transactivation of EGF-receptor (EGFR) by G-protein coupled receptors (GPCRs) is emerging as an important pathway in cell proliferation, which plays a crucial role in the development of atherosclerotic lesion. Angiotensin II (Ang II) has been identified to have a major role in the formation of atherosclerotic lesions, although the underlying mechanisms remain largely unclear. We hypothesize that Ang II promotes the proliferation and migration of smooth muscle cells through the release of heparin-binding epidermal growth factor like growth factor (HB-EGF), transactivation of EGFR and activation of Akt and Erk 1/2, with matrix metalloproteases (MMPs) playing a dispensable role. Primary rat aortic smooth muscle cells were used in this study. Smooth muscle cells rendered quiescent by serum deprivation for 12 h were treated with Ang II (100 nM) in the presence of either GM6001 ($20{\mu}M$), a specific inhibitor of MMPs or AG1478 ($10{\mu}M$), an inhibitor of EGFR. The levels of phosphorylation of EGFR, Akt and Erk 1/2 were assessed in the cell lysates. Inhibition of MMPs by GM6001 significantly attenuated Ang II-stimulated phosphorylation of EGFR, suggesting that MMPs may be involved in the transactivation of EGFR by Ang II receptor. Furthermore Ang II-stimulated proliferation and migration of smooth muscle cells were significantly blunted by inhibiting MMPs and EGFR and applying HB-EGF neutralization antibody, indicating that MMPs, HB-EGF and EGFR activation is necessary for Ang-II stimulated migration and proliferation of smooth muscle cells. Our results suggest that inhibition of MMPs may represent one of the strategies to counter the mitogenic and motogenic effects of Ang II on smooth muscle cells and thereby prevent the formation and development of atherosclerotic lesions.