• 한국기계가공학회지
• /
• 제20권12호
• /
• pp.92-99
• /
• 2021

The ever-growing demand for enhanced competitiveness of engineered systems require designing in quality strategies that can efficiently incorporate multiple design attributes into a system. In a robust design, there must be consideration for any uncontrollable factors that should not be disregarded in the design process. Studies on multi-attribute design challenges usually assume mutual utility independence amongst the design attributes. However, mutual utility independence does not exist in every design situation. In this study, a new robust design methodology that has two utility-dependent attributes are presented. The proposed method was then compared with a traditional robust design that utilizes a wave soldering process design. The results of this case study indicate that the proposed method yields a better solution than the traditional method.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.36-37
• /
• 2021

OSC(Off-Site Construction) is regarded as a faster and more economical method in the construction industry, and the attention towards the OSC is growing. In the modular construction process, which is one type of OSC, accurate identification of a module is essential. Because the installation position and the MEP(Mechanical, Electrical, and Plumbing) composition are distinct between modules, a defect in the finishing or junction area is likely to happen during the construction process. This study suggested the modular construction process by applying a beacon receiver using BLE(Bluetooth Low Energy) technology on each module. Construction quality management would be improved using the location and assembly data, particularly for a different module in modular construction.

• 한국사회복지학
• /
• 제52권
• /
• pp.89-115
• /
• 2003

그동안 사회복지 임상실천 분야에서 주로 관심을 기울여 온 것은 개입방법의 개발과 효과성 측정 연구였다. 반면 이러한 연구 결과물이 어떻게 현장에 보급되고 활용되는지에 대한 관심은 상대적으로 부족한 편이었다. 이러한 현상은 결과적으로 연구와 실천간의 괴리를 초래할 수 있다는 비판이 제기되면서, 최근 외국에서는 사회복지 분야에서도 이론과 실천, 또는 학문과 현장을 잇는 중요한 기제로서 지식 및 기술의 보급과 활용에 대한 관심이 부각되고 있다. 이에 본 연구에서는 본 연구자가 프로그램 개발에 이어 현장보급 노력을 기울여 온 성장기술 프로그램을 중심으로 현장보급 과정과 활용현황을 살펴보고자 하였다. 이를 위하여 보급과 활용에 관한 기존 이론 및 모델들을 정리하고, 그 중 Herie와 Martin의 연구-실천 가교 모델에 의거하여 성장기술 프로그램의 현장 보급과정 및 활용 상황을 추적 조사하고 분석해 보았다. 그 결과 성장기술 프로그램 보급과정의 문제점으로는 구체적인 전략의 부재, 계획성 부족으로 인한 즉흥적인 대응, 초기 보급 대상자에 대한 허술한 파악 등을 도출할 수 있었다. 그리고 효과적인 보급과 활용을 위해서는 적절한 모델을 선택하고 그에 따라 보급과정을 적용하고 실천할 것, 프로그램 개발과정부터 보급에 대해 염두를 두고 진행할 것, 프로그램 개발 뿐 아니라 현장 피드백 확보를 위한 노력을 기울일 것, 그리고 사회복지 교육 및 연구에서 전파과정에 대한 부분을 강화할 것 등을 제언하였다. 이를 통해 몇 가지 한계점들에도 불구하고 보급 및 활용에 대한 중요성을 제시할 수 있었으며, 성장기술 프로그램의 현장 활용성도 파악할 수 있었다. 이와 같은 보급과 활용에 대한 논의들은 국내에서 진행되는 연구의 전파 뿐 아니라 그동안 외국으로부터 도입해온 개입방법들을 한국 상황에 맞게 토착화하기 위하여 앞으로 더욱 활성화될 필요가 있을 것이다.

• 한국생산제조학회지
• /
• 제9권5호
• /
• pp.47-57
• /
• 2000

In this study, a fundamental approach to make clear the mechanism of the mutual interference and coalescence of stress fields in the vicinity of two crack tips on the process of their slow growth, using boundary element method. Automatic generation of quadratic discontinuous elements along both of the crack boundaries which can be defined by an arbitrary piece-wise straight geometry. The direction of the crack-extension increment is predicted by the maximum principal stress criterion, corrected to account for the discreteness of the crack extension. Along the computed direction, the crack is extended one increment. Automatic incremental crack-extension analysis with no remeshing, computation of the stress intensity factors by J-integral. Numerical stress intensity factors for two growing cracks in plane-homogeneous regions were determined.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2005년도 BIOINFO 2005
• /
• pp.124-129
• /
• 2005

The Growing Self-Organizing Map (GSOM), an extended type of the Self-Organizing Map, is a widely accepted tool for clustering high dimensional data. It is also suitable for the clustering of short DNA sequences of phylogenetic genomes by their oligonucleotide frequency. The GSOM presents the result of the clustering process visually on a coloured map, where the clusters can be identified by the user. This paper describes a proposal for automatic cluster detection on this map without any participation by the user. It has been applied with good success on 20 different data sets for the purpose of species separation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.393-396
• /
• 2005

Due to the fast growing rate of the global container trade, every major port is under the pressure of meeting the projected capacity demand. As a result, alternative solutions have been sought for improving capacity and meeting the growing demand for container storage area and terminal capacity. Moreover, material handling process re-engineering is now a critical issue for logistics and supply chain managers of airline, shipping lines, terminal and warehousing enterprises around the world. Therefore, the purpose of this paper is to develop the 3D simulator for executing performance valuation of port transportation systems. The developed 3D simulator system is to measure the effectiveness of the proposed total system and compare it with existing practices. The performance analysis variables are also defined for these comparisons

• 한국세라믹학회지
• /
• 제31권2호
• /
• pp.147-154
• /
• 1994

The imperfections of LiTaO3 crystals grown from the Pt-Rh and the Ir crucible were investigated with X-ray diffraction, optical and electron microscope. The growth direction was <100>h and the plane parallel to the plane connecting two main growth ridges was (012)h which would be the main cleavage plane. The dislocation density in the specimen cut parallel to (012)h plane increased with polishing time and the inverted ferroelectric microdomains were induced based on this dislocations. Such imperfections as 180$^{\circ}$ domains, microcracks, dislocations and stacking faults. could be found in the LiTaO3 crytals. The crystal contaminated with lots of Rh form Pt-Rh crucible during the crystal growing under air atmosphere contained more imperfections. The main cleavage plane and subgrain boundary parallel to its growing axis might be the main source of reducing the mechnical strength during the wafering process.

• Genomics & Informatics
• /
• 제11권1호
• /
• pp.55-57
• /
• 2013

Growing numbers of studies employ cell line-based systematic short interfering RNA (siRNA) screens to study gene functions and to identify drug targets. As multiple sources of variations that are unique to siRNA screens exist, there is a growing demand for a computational tool that generates normalized values and standardized scores. However, only a few tools have been available so far with limited usability. Here, we present siMacro, a fast and easy-to-use Microsoft Office Excel-based tool with a graphic user interface, designed to process single-condition or two-condition synthetic screen datasets. siMacro normalizes position and batch effects, censors outlier samples, and calculates Z-scores and robust Z-scores, with a spreadsheet output of >120,000 samples in under 1 minute.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.72-75
• /
• 2008

Image segmentation techniques becoming increasingly important in the field of remote sensing image analysis in areas such as object oriented image classification. This paper presents a new method for image segmentation in High Resolution Remote Sensing Image based on Seeded Region Growing (SRG) and Edge Information. Firstly, multi-spectral edge detection was done using an entropy operator in pan-sharpened QuickBird imagery. Then, the initial seeds were automatically selected from the obtained edge map. After automatic selection of significant seeds, an initial segmentation was achieved by applying SRG. Finally the region merging process, using region adjacency graph (RAG), was carried out to get the final segmentation result. Experimental results demonstrated that the proposed method has good potential for application in the segmentation of high resolution satellite images.

• International journal of advanced smart convergence
• /
• 제5권2호
• /
• pp.66-72
• /
• 2016

With the growing shift from traditional educational approaches and studying to the more digital classroom, using electronic textbooks and digital native's demand, there is a growing need to develop new methods for learn Kanji characters for children. The purpose of this study is to help children learn the basic Kanji by using stop motion and block methods, and approaching the basic Kanji character education with a more innovative and interactive smart phone APP. In the development of this smart phone App for children's Kanji character education proposed in this study, 100 basic Kanji characters for children are selected. These 100 characters are required for the stop motion animation production, where each selected Kanji is created as a stop-motion animation utilizing a variety of techniques, such as storytelling, to better engage children. The intelligent App is designed with image recognition technology, so that in the learning process children take a picture for the assembled block using their smart phone, the APP then recognizes whether it is assembled correctly, and then plays an animation corresponding to the assembled Kanji character.