• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.4
• /
• pp.111-124
• /
• 2010

To monitor the environment of land surface change is considered as an important research field since those parameters are related with land use, climate change, meteorological study, agriculture modulation, surface energy balance, and surface environment system. For the change detection, many different methods have been presented for distributing more detailed information with various tools from ground based measurement to satellite multi-spectral sensor. Recently, using high resolution satellite data is considered the most efficient way to monitor extensive land environmental system especially for higher spatial and temporal resolution. In this study, we use two different spatial resolution satellites; the one is SPOT/VEGETATION with 1 km spatial resolution to detect coarse resolution of the area change and determine objective threshold. The other is Landsat satellite having high resolution to figure out detailed land environmental change. According to their spatial resolution, they show different observation characteristics such as repeat cycle, and the global coverage. By correlating two kinds of satellites, we can detect land surface change from mid resolution to high resolution. The K-mean clustering algorithm is applied to detect changed area with two different temporal images. When using solar spectral band, there are complicate surface reflectance scattering characteristics which make surface change detection difficult. That effect would be leading serious problems when interpreting surface characteristics. For example, in spite of constant their own surface reflectance value, it could be changed according to solar, and sensor relative observation location. To reduce those affects, in this study, long-term Normalized Difference Vegetation Index (NDVI) with solar spectral channels performed for atmospheric and bi-directional correction from SPOT/VEGETATION data are utilized to offer objective threshold value for detecting land surface change, since that NDVI has less sensitivity for solar geometry than solar channel. The surface change detection based on long-term NDVI shows improved results than when only using Landsat.

• Journal of the Korean earth science society
• /
• v.38 no.4
• /
• pp.283-292
• /
• 2017

In this study, the empirical models were established to estimate the concentrations of surface-level $PM_{2.5}$ over Seoul, Korea from 1 January 2012 to 31 December 2013. We used six different multiple linear regression models with aerosol optical thickness (AOT), ${\AA}ngstr{\ddot{o}}m$ exponents (AE) data from Moderate Resolution Imaging Spectroradiometer (MODIS) aboard Terra and Aqua satellites, meteorological data, and planetary boundary layer depth (PBLD) data. The results showed that $M_6$ was the best empirical model and AOT, AE, relative humidity (RH), wind speed, wind direction, PBLD, and air temperature data were used as input data. Statistical analysis showed that the result between the observed $PM_{2.5}$ and the estimated $PM_{2.5}$ concentrations using $M_6$ model were correlations (R=0.62) and root square mean error ($RMSE=10.70{\mu}gm^{-3}$). In addition, our study show that the relation strongly depends on the seasons due to seasonal observation characteristics of AOT, with a relatively better correlation in spring (R=0.66) and autumntime (R=0.75) than summer and wintertime (R was about 0.38 and 0.56). These results were due to cloud contamination of summertime and the influence of snow/ice surface of wintertime, compared with those of other seasons. Therefore, the empirical multiple linear regression model used in this study showed that the AOT data retrieved from the satellite was important a dominant variable and we will need to use additional weather variables to improve the results of $PM_{2.5}$. Also, the result calculated for $PM_{2.5}$ using empirical multi linear regression model will be useful as a method to enable monitoring of atmospheric environment from satellite and ground meteorological data.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.12
• /
• pp.117-128
• /
• 2014

Generally, when constructing a tunnel close to existing structures, the tunnel must be built at a constant distance from the structures that is more than width of tunnel to minimize the impact of interference between an existing structures and new tunnel. Spacing of these closed tunnels should be designed considering soil state, size of tunnel and reinforcement method. Particularly when the ground is soft, a care should be taken with the tunnel plans because the closer the tunnel is to the existing structures, the greater the deformation becomes. As methods of reviewing the effect of cavities on the stability of a tunnel, field measurement, numerical analysis and scaled model test can be considered. In the methods, the scaled model test can reproduce the engineering characteristics of a rock in a field condition and the shape of structures using the scale factor even not all conditions cannot be considered. In this study, when construction of a tunnel close to existing structures, the method and considering factors of the scaled model test were studied to predict the actual tunnel behavior in planning stage. Furthermore, model test results were compared with the numerical analysis results for verifying the proposed model test procedure. Also, practical results were derived to verify the stability of a tunnel vis-a-vis cavities through the scaled model test, which assumed spacing distances of 0.25 D, 0.50 D, and 1.00 D between the cavities and tunnel as well as the network state distribution. The spacing distances of 1.0 D is evaluated as the critical distance by the results of model test and numerical analysis.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.4
• /
• pp.65-70
• /
• 2005

Many case histories of re-liquefaction phenomena seem to support the idea that sand deposits, if they once have been liquefied, could be reliquefied again by a subsequent earthquake even though the earthquake is smaller than the previous one. The magnitude of the strains induced in the initial liquefaction has a significant influence on the resistance of the sample to re-liquefaction. The deposits undergoing liquefaction experience large shear strain during liquefaction. And this previous strain changes the microstructure into highly anisotropic structure such as columnlike structure and connected voids. This type of anisotropy is so unstable that it can reduce re-liquefaction resistance. It is blown that the extent of anisotropic structural change depends on the gradation characteristics of ground. The purpose of this study is to estimate the correlation between the gradation characteristics of the sand and the ratio of re-liquefaction resistance to liquefaction resistance. In this study, 1-g shaking table tests were carried out on five different kinds of sands. During the tests the values of excess pore pressure at various depths and surface settlements were measured. Re-liquefaction resistances were not affected by the initial void ratio and the effective confining pressures, and the deposits of all test sands which had once been liquefied were reliquefied in the cyclic loading number below 1 to 1.5. The ratio of re-liquefaction resistance to liquefaction resistance linearly decreased as $D_{10}/C_u$ increased, and was constant as about 0.2 above the value of $D_{10}/C_u$, 0.15 mm.

• Food Science of Animal Resources
• /
• v.27 no.2
• /
• pp.179-184
• /
• 2007

The objective of this study was to investigate the contents of meat and non-meat ingredients, calorie, fatty acid composition, and cholesterol contents of processed meat products of which informations are being provided for consumer and partly required for the current labeling system in Korea. A total of sixty-one domestic processed meat products produced from 6 domestic meat companies were collected at the large supermarkets in Suwon city; 1) 31 ham products(3 loin hams, 6 press hams, 20 mixed press hams and 2 fish hams), 26 sausage products(15 pork sausages, 7 mixed sausages and 4 fish sausages) and 4 ground processed meat products. Soy protein and com starch were widely used as non-meat ingredients for the most of processed meat products. The contents of meat, protein, fat, cholesterol contents, and calories were 75-98, 12-23, 1-16%, 7-50 mg/100g, and 1,620-3,127 cal/g for ham products and 60-96, 5-17, 3-27%, 5-73 mg/100g, and 1,271-3,546 cal/g for sausage products, respectively. The saturated(SFA), monounsaturated(MUFA) and polyunsaturated fatty acids(PUFA) contents of ham products were 31-40, 44-53 and 60-72%, and those of sausage products were 17-38, 34-61, and 13-37%, respectively. The ranges of meat contents and nutritional compositions were considerably broad even in the same type of the meat products. Therefore, the labeling system of the nutritional facts for ham as well as sausage products is necessary to categorize the quality level and thus to give the nutritional information to consumer for better choice of products in market.

• Journal of Aquaculture
• /
• v.4 no.2
• /
• pp.111-128
• /
• 1991

In puan area the environmental surveys were carried out at two farms of hard clam, Meretrix lusoria from April 1987 to November 1978 in order to know heather the farm environments could be rehabilitated for the cultivation of hard clam or not. The range of temperature of surface seawater was $10.7{\~}27.4^{\circ}C$, pH $7.6{\~}8.2$, salinity $22.3{\~}30.3$ ppt, COD $0.20{\~}4.71\;mg/{\ell}$, sulfide $0.04{\~}0.22\;{\mu}g-at./{\ell}$, suspended solid $34.8{\~}199.3\;mg/{\ell}$ chlorophyll a $3.71{\~}49.02\;mg/m^3$, TIN $2.01{\~}24.47\;{\mu}g-a5./{\ell}$, phosphate $0.60{\~}11.03\;{\mu}g-at./{\ell}$ and silicate $4.04{\~}476.36\;{\mu}g-at./{\ell}$. The range of temperature of substratum (bottom soil) was $14.2{\~}29.7^{\circ}C$, pH $8.3{\~}9.5$, water content of substratum was $0.28{\~}0.49\;mg/g$ dried mud, COD $2.80{\~}50.94\;mg/g$ dried mud, total organic matter $1.05{\~}1.97\%$ concentration of total Kjedhal nitrogen $31.9{\~}194.9\;{\mu}g./{\ell}$ dried mud, and sulfide $0.032{\~}0.133\;mg/g$ dried mud. Fine sand was dominant ranging over $92{\~}95\%$ and silt and clay was $2.8{\~}8.1\%$ of the composition of substratum. Some residual agricultural chemicals, ${\alpha},\;{\beta},\;{\gamma}$-BHC, heptachlor, heptachlor-epoxide, aldrin, DDE, DDT and dieldrin were detected in hard clams collected from Puan areas. Especialy, more chemical were detected during the period of rainfalls. From above results, it is considered that the hard clam frams were not yet recovered from deteriorated conditions for aquaculture.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.3
• /
• pp.274-279
• /
• 1989

The objective of the study was to determine optimum clipping time, interval and height of Suwon 1 pearl millet hybrid in Korea to increase forage yield and quality. Clipping height 20 cm above the ground surface was the best resulting in producing 11.1 tons per hectare of green chop. However, clipping height 5 cm was not good for regrowth of the ratoon crop. Just after the first cutting when the plant height reached two meters around mid-July, four weeks cutting interval was the best for higher forage yield of 11. 4 tons per hectare. Crude protein content of the clipping height 20 cm was the highest being 12.8 percent. Dry matter of the first cut contained 14 percent of crude protein being the highest, and with lower crude fiber content of 24 percent. And also four weeks cutting interval was the highest in crude protein content being 13.1 percent along with lower crude fiber content of 24.2 percent. Thus, the forage yield depended on clipping height greatly, but the quality was dependent upon clipping time, interval and frequency more than cutting height pearl millet plant. It would be desirable for higher yield and quality of Suwon 1 pearl millet hybrid to cut three or four times during the growing season at 20 cm clipping height and at four weeks clipping interval from the first cut when the canopy height is above one meter under the Korean environmental conditions.

• The Korean Journal of Air & Space Law and Policy
• /
• v.32 no.2
• /
• pp.247-276
• /
• 2017

The protection of space asset has been new major cause of space militarization. For such purpose, it has been officially announced that a policy of deterring and denying any adversaries from accessing the outer space. Space militarization is to be conversed into a new concept of space weaponization. The USA has announced its policy of space weaponization, while China and Russia have not revealed their plan or policy. Latter States, however, have proposed a draft treaty limiting the deployment of warfare in the outer space. The terms of the Outer Space Treaty, reflecting three significant United Nations General Assembly resolutions from the 1960s, support the position that ground rules must be observed in the exploration and the use of outer space, particularly in the absence of specific space law rules. Yet the combination (and culmination) of these two approaches to the legal regulation of outer space-specific rules as and when agreed by the international community and the translation of principles developed for terrestrial regulation to outer space-still leaves much room for uncertainty and exploitation for military and strategic purposes. As space weaponization may contribute to deterring the use of weapon, it may be not against the UN Charter Article 2(4). If space weaponization might generate the space debris such that the outer space is no more available for exploration and use, it is against the proportionality principle and discrimination principle enshrined in the laws of the war. But, if the limitation upon the kind and use of space weaponization is agreed among the States, then the space weaponization may not be against the laws of the war, and be considered permissible within the rationale of limited war.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.34 no.2
• /
• pp.87-99
• /
• 2016

This study was carried out to characterize 127 recently developed cultivars of Rose of Sharon (Hibiscus spp.) in Korea and foreign Countries for landscape uses. The examined factors were growth characteristics such as tree height of a 1-year grafted plant(cm), plant type, growth habit, leaf characteristics such as shape and size, flower characteristics such as color, shape, size, and red eye during 2014 and 2015 for landscape uses. The results are obtained as follows; Hibiscus hybrid 'Daewangchun', 'Daeil', 'Lohengrin', 'Yeonam', 'Joomong', 'Jina', and H. syriacus 'Honggarosu' had vigorous shoot growth and tall tree size of 100cm. New Hibiscus cultivars, Hibiscus hybrid 'Daewangchun' and 'Daeil', having vigorous growth, uniform plant habit, upright, and compact branches were developed through interspecific crosses between H. syriacus 'Samchully' (♀) and H. sinosyriacus 'Seobong' (♂). This newly developed cultivar 'Daewangchun', 'Daeil', 'Lohengrin', 'Yeonam', 'Joomong', 'Jina', and H. syriacus 'Honggarosu' having tall vigorous growth d unique flower with long red eye can be used as street tree or specimen plant in landscape. Otherwise, H. syriacus 'Tamla', 'Melrose', 'Bidan', 'Hi Lea', 'Byeollee', 'Byunghwa', 'Mibak', 'Hanyang', 'Chungam', 'Lil Kim Violet', 'Jongmoo', 'Eunhasu', Hibiscus hybrid 'Saehanseo', and Hibiscus hybrid 'Yousoon' were selected as small tree of 30~39cm. They had dwarf form in tree seemed to be suitable for pot or flower bed planting on both indoor and outdoor conditions. H. syriacus 'Antong', 'Chungjo', and 'Lil Kim' were less than 30 cm of tree size. H. syriacus 'Antong', 'Chungjo', and 'Lil Kim', characterized by its compact, upright and outwardly spreading plant habit; freely branching habit; dark green-colored leaves; good garden performance. Therefore, the new cultivars with tall and small tree size were a promising cultivar as a ground covers or pot planting as woody landscape plant.

• Korean Journal of Plant Resources
• /
• v.34 no.1
• /
• pp.64-72
• /
• 2021

This study aimed to identify regions with a suitable growth environment for Ligusticum chuanxing Hort. and use basic data to identify appropriate cultivation and stable production strategies. Four main areas of cultivation were selected and the relationship between growth characteristics (aboveground and underground parts) and weather and soil environment was analyzed. Overall growth was found to be significantly higher in Pyeongchang. Atmospheric and soil temperatures showed a significant negative correlation with overall height from the ground, stem diameter, and growth characteristics of the underground part; leaf length and width were positively correlated. As insolation increased, the growth characteristics, excluding leaf size, showed a positive correlation. Soil characteristics such as organic matter (OM), N, P, and K showed negative correlations with the overall height of the upper part and growth characteristics of the underground part, including stem diameter. Analysis of roots indicated that OM, N, P, and K were essential and were absorbed through the soil. The OM, N, P, and K values in the Pyeongchang area, which showed the optimal growth, were lower than those in other areas. It is believed that these results can be used to select cultivation sites for L. chuanxing and establish cultivation technology in future.