• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.1-7
• /
• 2013

In this study, the resistance to ozone and characteristics of ozone-induced damage were investigated on the perennial ground cover plant species. Sedum kamtschaticum and Hosta longipes were exposed to $200{\mu}g{\cdot}kg^{-1}$ ozone for 8 hours per day (from 08:00 to 16:00) in the naturally irradiated phytotron. The extent of ozone-induced damage was measured through the analysis of physiological parameters, such as water use efficiency (WUE), chlorophyll content (Chl. a, Chl. b, Chl. a + b, and Chl. a/b ratio), carotenoid contents, and the induction of reactive oxygen species (ROS). Ozone exposure significantly reduced the daytime WUE in both species. The contents of chlorophyll and carotenoid were also decreased and ROS, such as hydrogen peroxide ($H_2O_2$) and superoxide radical ($O_2{^-}$) were accumulated after ozone exposure. The above results of this study suggested that S. kamtschaticum is more resistant to atmospheric ozone than Hosta longipes. Considering its fast responses to ozone, it was also assumed that Hosta longipes can be used as an indicator plant of an increase in atmospheric ozone concentration.

• Korean Journal of Remote Sensing
• /
• v.24 no.6
• /
• pp.551-558
• /
• 2008

It is well known that the protein content of rice grain is an indicator of taste of cooked rice in the countries where people as the staple food. Ground-based optical sensing over the crop canopy would provide information not only on the mass of plant body which reflects the light, but also on the crop nitrogen content which is closely related to the greenness of plant leaves. The vegetation index has been related to crop variables such as biomass, leaf nitrogen, plant cover, and chlorophyll in cereals. The objective of this study was to investigate the correlation between GNDVI and NDVI values, and grain protein content at different dates and to estimate the grain protein content using G(NDVI) values. We measured Green normalized difference vegetation index [$GNDVI=({\rho}0.80{\mu}m-{\rho}0.55{\mu}m)/({\rho}0.80{\mu}m+{\rho}0.55{\mu}m)$] and [$GNDVI=({\rho}0.80{\mu}m-{\rho}0.68{\mu}m)/({\rho}0.80{\mu}m+{\rho}0.68{\mu}m)$] by using two different active sensors. The study was conducted during the rice growing season for three years from 2005 through 2007 at the experimental plots of National Institute of Agricultural Science and Technology. The experiments were carried out by randomized complete block design with the application of four levels of nitrogen fertilizers(0, 70, 100, 130kg N/ha) and the same amount of phosphorous and potassium content of the fertilizers. After heading stage, relationships between GNDVI of rice canopy and grain protein content showed the highly positive correlation at different dates for three years. GNDVI values showed higher correlation coefficients than that of NDVI during growing season in 2005-07. The correlation between GNDVI values at different dates and grain protein contents was highly correlated at early July. We attempted to estimate the grain protein content at harvesting stage using GNDVI values from early July for three years. The determination coefficients of the linear model by GNDVI values were 0.9l and the measured and estimated grain protein content at harvesting stage using GNDVI values highly correlated($R^2=0.96^{***}$). Results from this study show that GNDVI appeared very effective to estimate leaf nitrogen and grain protein content of rice canopy.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.4
• /
• pp.119-132
• /
• 2012

The unmanaged abandoned concrete roads are vulnerable toward the issues on soil and water pollution, which requires flexible managing method such as eco-corridor after the process of ecological restoration. Among various alternations of abandoned concrete-paved roads, ecological restoration technique may be the most suitable method in sites including high quality of natural environment. Therefore, as in Young dong province, GyungBu express highway (227.24~229.04km), which is near to Hwang-gan IC, the survey to measure its effect of soil under the paving and water pollution by abandoned concrete roads was discussed. Then, the restoration method of plantings of landscape trees and hydro-seeding methods of artificial soil media was appraised through consecutive monitoring. The soil adequacy analysis shows lower percentage of heavy metal substance in each depth level compared to standard limit stated by the Ministry of Environment, along with low concerns raised after the analysis on heavy metal content of the spilled water on the concrete roads. Meanwhile, Korean Weigela (Weigela subsessilis L.H. Baily) was found to be withered in small-scale landscape trees planting sites. Among the seeding plants. the family of leguminosae, Silene armeria, Dendranthema boreale, Caryopteris incana and Aster yomena show good establishment results. Overall studies on planting of small and large landscape trees, planting method of container plants, planting method of ground cover plants, and germination and development trend of seeding plants of the experimental restoration site on abandoned concrete roads are revealing specific trends in the way landscape woody plants establishment and growth. Finally, this study suggests further studies and survey on varied plant restoration methods on abandoned concrete-roads for developed design guidelines of their methods.

• Korean Journal of Environment and Ecology
• /
• v.12 no.1
• /
• pp.30-41
• /
• 1998

This study analyzed urban greenspace area and vegetation structure by land use types for Kangnam-gu and Junglang-gu in Seoul different in income and building construction date. The study districts had a similar areal distribution of land use types. Residential lands accounted for about 32~37% of total area, natural lands, 19~22%, commercial and industrial lands(including transportation), 13~18%, and institutional lands, 13~17%. Greenspace covered only 20~30% of urban residential and commercial area in which human activities of living concentrate. Canopy stocking level in urban lands (all land uses except natural and agrecultural lands) was about 39% for Kangnam-gu and 50% for Junglang-gu, showing tree planting potential slightly higher in Kangnam-gu than in Junglang-gu. Woody plant cover was approximately 13%, and tree density was 3 trees/100m$^{2}$ forurban lands in both districts. The tree-age structure was largely characterized by young, growing tree population, and species diversity within a diameter class decreases as the diameter classes get larger. Urban lands of both districts had quite a similar species composition of woody plants (similarity indez of 0.70). Income and bulding construction date did not result in significant diference between the two districts in vegetation structure for urban lands. Some strategies were ezplored to solve problems found in the present greenspace structures. They included increase of biomass and greenspace area through minimization of unnecessary impervious surfaces, creation of multilayered and multiaged vegetation structures, and avoidance of intensive tree pruning and relocation of above ground utility lines.

• Korean Journal of Environment and Ecology
• /
• v.27 no.2
• /
• pp.241-252
• /
• 2013

This study investigated plant community structure of Dongbaekdongsan(Mt.) in Jeju-do to identify character as evergreen broad-leaved forest. 20 plots(size is $20m{\times}20m$) were set up and plant communities were divided into 5 communities of Quercus glauca-Castanopsis cuspidata var. sievoldii-Ilex integra(Camellia japonica), Quercus glauca-Castanopsis cuspidata var. sievoldii-Camellia japonica, Quercus glauca-Camellia japonica, Quercus glauca-Camellia japonica-Pinus thunbergii and Pinus thunbergii-Quercus glauca by using TWINSPAN, DCA ordination, mean importance value and environmental condition. Area of Evergreen broad-leaved forest with stonny ground is covered with Quercus glauca and Castanopsis cuspidata var. sievoldii in canopy layer and Camellia japonica in the subordinate layer. Area of remaining soil's depth is covered with Pinus thunbergii. It has been alleged that Pinus thunbergii planted by human when Dongbaekdongsan(Mt.) is not selected local monuments. All of communities is predicted success to community of Quercus glauca-Camellia japonica. Shannon's diversity ranged from 1.0268 to 1.0717 in area of Evergreen broad-leaved forest and 1.2102 in area of Pinus thunbergii. 10 species of broad-leaved tree's constancy ratio is over the 80%. In future, Castanopsis cuspidata var. sievoldii and Cinnamomum japonicum can cover canopy layer, but it has low importance value. Specially high aged Camellia japonica is appeared everywhere. It has been alleged that it was touched by divinity since past. Dongbaekdongsan(Mt.) has different plant structure with another evergreen broad-leaved forest. It is hard that knowing its successional sere because it was damaged when it isn't degignate local monument. Accordingly continuous monitoring was required, successional direction and community's character is identified after forest become steady.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.3
• /
• pp.374-383
• /
• 2010

Microwave radar can penetrate cloud cover regardless of weather conditions and can be used day and night. Especially a ground-based polarimetric scatterometer has advantages of monitoring crop conditions continuously with full polarization and different frequencies. Kim et al. (2009) have measured backscattering coefficients of paddy rice using L-, C-, X-band scatterometer system with full polarization and various angles during the rice growth period and have revealed the necessity of near-continuous automatic measurement to eliminate the difficulties, inaccuracy and sparseness of data acquisitions arising from manual operation of the system. In this study, we constructed an X-band automatic scatterometer system, analyzed scattering characteristics of paddy rice from X-band scatterometer data and estimated rice growth parameter using backscattering coefficients in X-band. The system was installed inside a shelter in an experimental paddy field at the National Academy of Agricultural Science (NAAS) before rice transplanting. The scatterometer system consists of X-band antennas, HP8720D vector network analyzer, RF cables and personal computer that controls frequency, polarization and data storage. This system using automatically measures fully-polarimetric backscattering coefficients of rice crop every 10 minutes. The backscattering coefficients were calculated from the measured data at a fixed incidence angle of $45^{\circ}$ and with full polarization (HH, VV, HV, VH) by applying the radar equation and compared with rice growth data such as plant height, stem number, fresh dry weight and Leaf Area Index (LAI) that were collected at the same time of each rice growth parameter. We examined the temporal behaviour of the backscattering coefficients of the rice crop at X-band during rice growth period. The HH-, VV-polarization backscattering coefficients steadily increased toward panicle initiation stage, thereafter decreased and again increased in early-September. We analyzed the relationships between backscattering coefficients in X-band and plant parameters and predicted the rice growth parameters using backscattering coefficients. It was confirmed that X-band is sensitive to grain maturity at near harvesting season.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.5
• /
• pp.81-87
• /
• 2014

Heavy metal pollution is a widespread global problem causing serious environmental concern. Heavy metals such as Cd, Pb, and Zn can induce toxicity in all organisms if the soil levels of contaminants reach critical values. The aim of the present study was to examine the application of Liriope platyphylla, an ornamental Korean native plant with great potential for contaminated soil in urban areas, to determine tolerance for Cd, Pb, and Zn. Plants were grown in amended artificial soil with Cd, Pb, and Zn at 0, 100, 250, and $500mg{\cdot}kg^{-1}$ for 7 months. The length of leaf, width of leaf, total leaf number, dead leaf number, new leaf number, chlorophyll contents, and ornamental value were monitored from May to August, during growth the period. The relative leaf length and leaf width displayed rapidly decreasing tendencies with an increasing Cd concentration beginning from 4 months after planting. The same decreasing tendency was observed in total leaf number, new leaf number, chlorophyll contents, and ornamental values showed a trend of Control> $Cd_{100}$ > $Cd_{250}$ > $Cd_{500}$. In Pb concentration treatments, the relative leaf length and leaf width were significantly lower in plants grown at $250mg{\cdot}kg^{-1}$ and $500mg{\cdot}kg^{-1}$ as compared to the Control, $100mg{\cdot}kg^{-1}$. The total leaf number, new leaf number, and dead leaf number did not show significant difference among treatments in Control and $Pb_{100}$ but chlorophyll contents and ornamental value decreased with increasing Pb supply concentration treatments. However, in Zn supply treatments, the relative leaf length was higher at $100mg{\cdot}kg^{-1}$ than the Control, $250mg{\cdot}kg^{-1}$, $500mg{\cdot}kg^{-1}$, but the relative leaf width decreased compared to the Control, $Zn_{100}$, $Zn_{250}$, and $Zn_{500}$. The total leaf number, dead leaf number, new leaf number, and ornamental value showed the lowest value in plants grown in $Zn_{500}$ treatment but no significant differences were found among other treatments.

• Korean Journal of Plant Resources
• /
• v.22 no.2
• /
• pp.116-122
• /
• 2009

Heteropappus arenarius Kitam., an autumn-flowering biennial belonging to wild chrysanthemums, is found to be native in southeastern coastal area and Jeju island of Korea. It could play a good role for ground cover plants on a large-scale landscape area, especially, barren soil or sloping hillside. This study was initiated to screen optimum germination temperature influenced by local strain and harvesting stage of H. arenarius. The following was the response of seed germination between local strain and temperature. The average of final germination percentage (FG) was the highest in 'Guryongpo' (89.7%) among four local strains, followed by 'Gujwa' (87.3%), 'Gampo' (87.3%), and 'HKNU-I' (71.5%). The average of $T_{50}$ was shorter in 'Gujwa' (3.6 d) and 'Guryongpo' (4.0 d) than the others. The average of FG and $T_{50}$ was the highest as 76.2% and shortest as 3.6 d in $20^{\circ}C$, respectively, followed by $30^{\circ}C$, $25^{\circ}C$, and $15^{\circ}C$. In case of 'Gujwa', however, FG and T50 was higher in $20^{\circ}C$ and shorter in $15^{\circ}C$ than others. In the relationship between harvesting stage and temperature, the average of FG was greatly higher in Stage III (90.7%) and Stage IV (88.6%) than the others including Stage II (35.7%) and Stage I (26.0%). The average of $T_{50}$ was shorter in Stage IV (3.7 d) and Stage III (4.3 d) than the others, which showed less than 50% of FG. Nevertheless, the available range of seed harvesting stage was from Stage I to Stage IV because H. arenarius seeds could germinate at all stages. In conclusion, it was recommended that the optimum temperature and harvesting stage was $20^{\circ}C$ and Stage $III{\sim}IV$, respectively, for seed germination of H. arenarius.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.103-119
• /
• 2023

Since the Korean government has decided to apply the policy of BIM (Building Information Modeling) to the entire construction industry, it has experienced a positive trend in adoption and utilization. BIM can reduce workloads by building model objects into libraries that conform to standards and enable consistent quality, data integrity, and compatibility. In the domestic architecture, civil engineering, and the overseas landscape architecture sectors, many BIM library standardization studies have been conducted, and guidelines have been established based on them. Currently, basic research and attempts to introduce BIM are being made in Korean landscape architecture field, but the diffusion has been delayed due to difficulties in application. This can be addressed by enhancing the efficiency of BIM work using standardized libraries. Therefore, this study aims to provide a starting point for discussions and present a classification system for objects and attribute information that can be referred to when creating landscape libraries in practice. The standardization of landscape BIM library was explored from two directions: object classification and attribute information items. First, the Korean construction information classification system, product inventory classification system, landscape design and construction standards, and BIM object classification of the NLA (Norwegian Association of Landscape Architects) were referred to classify landscape objects. As a result, the objects were divided into 12 subcategories, including 'trees', 'shrubs', 'ground cover and others', 'outdoor installation', 'outdoor lighting facility', 'stairs and ramp', 'outdoor wall', 'outdoor structure', 'pavement', 'curb', 'irrigation', and 'drainage' under five major categories: 'landscape plant', 'landscape facility', 'landscape structure', 'landscape pavement', and 'irrigation and drainage'. Next, the attribute information for the objects was extracted and structured. To do this, the common attribute information items of the KBIMS (Korean BIM Standard) were included, and the object attribute information items that vary according to the type of objects were included by referring to the PDT (Product Data Template) of the LI (UK Landscape Institute). As a result, the common attributes included information on 'identification', 'distribution', 'classification', and 'manufacture and supply' information, while the object attributes included information on 'naming', 'specifications', 'installation or construction', 'performance', 'sustainability', and 'operations and maintenance'. The significance of this study lies in establishing the foundation for the introduction of landscape BIM through the standardization of library objects, which will enhance the efficiency of modeling tasks and improve the data consistency of BIM models across various disciplines in the construction industry.