• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.7
• /
• pp.779-784
• /
• 2011

This study was carried out on the crack healing of three types of SiC ceramics based on a $SiO_2$ additive, taking into account the roughness of the polishing plate used for polishing the specimens. The mixtures were subsequently hot-pressed in $N_2$ gas for one hour under 35 MPa at 2053 K. In these specimens, the optimized crack-healing condition was 1373 K for one hour in air. The crack-healing material of the cracked part was the glassy phase of $SiO_2$ that was formed by the oxidation of SiC. In the optimum healing condition, the bending strength of non-polished SiC ceramics was not completely recovered. However, the bending strength of the SAY specimen was excellent, considering the economic aspects of SAY, SAYS-1, and SAYS-2. The SAY specimen is definitely superior to the others after an hour of heat treatment. There was a decrease in the number and size of defects in the specimen polished by using a $125-{\mu}m$ polishing plate; however, the micro-surface defects were not completely repaired. The specimen polished by using a 40-${\mu}m$ polishing plate showed little voids or surface defects after an hour of heat treatment. The bending strength of the specimen mirror-polished by using a 6-${\mu}m$ polishing plate was completely recovered.

• Resources Recycling
• /
• v.25 no.1
• /
• pp.24-30
• /
• 2016

The study to obtain tantalum concentration from electronic components (ECs) on Printed circuit board assembly (PCBA) of laptop was conducted. Electronic components on laptop PCBA were detached from boards by using self-developed experimental apparatus. The detached electronic components were sieved and 93.2 wt.% of tantalum capacitors were concentrated from the size interval from 2.80 mm to 6.35 mm. The tantalum capacitors were pulverized by hammer mill and electrodes (anode and cathode) were removed from the grinding products by using magnetic separators under the magnetic force of 300 Gauss. Finally, tantalum concentrate was concentrated from the magnetic separator products by using Knelson concentrator, and the maximum efficiency of 76.9% was achieved under the operating condition of bowl rotating speed of 200 rpm, and fluidizing water flowrate of 7 L/min. The grade and recovery of Ta concentrate under the condition were 81.1% and 78.8%, respectively.

• Korean Journal of Veterinary Research
• /
• v.42 no.3
• /
• pp.363-370
• /
• 2002

For the development of diagnostic polymerase chain reaction (PCR) to fungal infection by dermatophytes Trichophyton and Microsporum, detection of the fungal DNA by PCR and analysis of the DNA pattern were undertaken in the present study. A total of 15 strains were tested and those consisted of 3 reference strains and 12 isolates such as: reference strains of T mentagrophytes (downy type, ATCC 9533), T rubrum (IFO 6204) and M gypseum (ATCC 9083), and each isolate of T mentogrophytes (powdery type), T mentagrophytes (granular type), T mentogrophytes (purple-red type), T rubrum, T raubitschekii, T tonsurans, T equinum, T ajelloi, T verrucosum, M cookei, M nanum and M gypseum. The DNA were purely isolated from all strains of Trichophyton spp. and Microsporum spp. by a simple method partly consisted of disruption of fungal cells by lyophilization and grinding and extraction of fungal DNA without phenol treatment which is a routine procedure in DNA isolation. For the detection of fungal DNAs, optimal condition of PCR was determined as preheating once at $94^{\circ}C$ for 5 min, 35 cycles of denaturation at $94^{\circ}C$ for 1 min, annealing at $38^{\circ}C$ for 1 min and polymerization at $72^{\circ}C$ for 2 min, and 1 cycle of final extension at $72^{\circ}C$ for 5 min. In PCR using arbitrary primers AP-1 (5' ACCCGACCTG3') and AP-2 (5' ACGGGCCAGT3'), DNAs in various numbers and sizes were detected from different species of Trichophyton and Microsporum, while DNAs in similar size were also detected in all strains of Trichophyton spp. and Microsporum spp. There were unique DNAs observed from certain dermatophytes by AP-1 such as 1,900 bases in T rubrum, 950 and 1,100 bases in T raubitscheldi, 2,100 bases in T equinum, 400 bases in T verrucosum and 1,150 bases in M gypseum. The unique DNAs were also observed by AP-2 such as 1,200 bases in T ajelloi, 250 bases in T verrucosum, 1,150 bases in M cookei and 2,000 bases in M nanum. The results indicated that PCR can detect a specific DNA from certain Trychophyton and Microsporum spp, which can be the information for further development of diagoomc PCR to dennatophytes.

• Resources Recycling
• /
• v.19 no.2
• /
• pp.35-44
• /
• 2010

As the competition of acquiring foreign resources of advanced countries and developing countries intensifies, South Korea which imports most of the mineral resources, started to re-develop domestic mines for molybdenite ore, in order to secure stable natural resources and decrease foreign currency expense. In this study, as a result of performing XRD and composite analysis on Dongwon NMC's (the sole producer of molybdenite ore in Korea) final concentrate(Mo 50.4%), Quartz, Grossular and Hedenbergite exists as impurities and size analysis showed that in relative coarse particle range of 60~140 mesh was formed with high grade over 57% Mo. Also, a test was performed to confirm the possibilities of increasing the grade and recovery of Dong won NMC's final ore. As a result, Mo 58.6% ($MoS_2$ 97.83%) was obtained with 87.47% recovery at a condition of 15 minutes grinding time, Kerosene as collector 0.1 l/ton, AF as Frother 65 7.2 l/ton, wash water of 630 ml/min and air flow rate of 1,197 ml/min.

• Resources Recycling
• /
• v.23 no.2
• /
• pp.26-36
• /
• 2014

The materials flow of copper can be analyzed into up-stream and down-stream stages based on the literature survey. Discharge and recycling stages in the down-stream have been particularly analyzed through the field survey. The waste nickel resources circulation flow may conveniently be grouped into 4 stages discharge import, collection disuse, resource recovery and product production export, the resources mainly consist of copper scrap and stainless steel scrap in 2010. The resource circulation rate of 36.83% is obtained from the above flow. Various plans are therefore, suggested in each stage to increase resource circulation rate. At discharge import stage, it is suggested to consider this kind of waste as an important resources if it is appropriately classified in detail, basides applying quota tariff to this kind of waste. At collection disuse stage, the plan of stabilizing supply and demand is suggested through the improvement of bidding system. Resources professional cycling stage crushing and grinding companies foster coexistence between large and small plans and strategies were suggested. At product production export stage, the integrated approval is suggested approval for licensing to register units as waste-treating facilities instead of exempting registration under the present condition to activate recycling industries.

• Korean Journal of Plant Resources
• /
• v.26 no.1
• /
• pp.52-59
• /
• 2013

This study was carried out to develop the proper cultivation methods of Brachythecium rivulare and Myuroclada maximowiczii which showed high-value for the interior landscaping and potting. Growth of two moss species cultivated in the compost covered with cloth was vigorous compared to that grown in containers only using cloth or compost, and their harvesting processes were easier. The growth and harvest easiness of mosses cultivated in compost were great rather than in bark or peatmoss. Compared to division, the spray of crushed mosses using mixer was effective for both gametophyte generation and their harvesting processes. In addition, the optimum inoculum for each container ($27{\times}17{\times}3cm$) was 2.0 g in B. rivulare and 4.0 g in M. maximowiczii. Overall growth of B. rivulare treated with nutrient solution (N:P:K=20:20:20) was inhibited compared to control, fresh-weight gain was reduced toward the higher concentration. But fresh-weight gain of M. maximowiczii was the highest with $0.25g{\cdot}L^{-1}$ treatment. Therefore, adequate moisture supply, after spraying crushed mosses (2.0 and 4.0 g each) in the compost covered with cloth, were the appropriate cultivation methods for B. rivulare and M. maximowiczii. Nutrient solution treatment with low concentration, during the cultivation period, would be the proper way only for M. maximowiczii.

• International Journal of Highway Engineering
• /
• v.3 no.2 s.8
• /
• pp.131-140
• /
• 2001

Concrete pavement of Jungbu Expressway composed of CRCP(Continuously Reinforced Concrete Pavement) and JCP(Jointed Concrete Pavement). The CRCP was firstly constructed and applied to new expressway in Korea. It is a good source of the study to analyze the performance of CRCP and JCP because it experiences same amount of traffic and environmental loading. Up to the present, condition survey has conducted several times during 13 years but roughness measurement has not been carefully conducted. Through comparisons among several types of pavement(CRCP, JCP, Asphalt) by roughness, CRCP is superior to JCP. In addition, connected sections in the highway such as bridges and tunnels that have higher IRI values, about 5mm/m, than normal sections should be considered appropriated maintenance such as diamond grinding. The relationship between IRI and distresses carried out by Korea Highway Cooperation in 1999 skewed that the number of crack is related to IRI value in JCP, while other distresses of JCP and CRCP are not shown clearly. The comparison study with IRI values between Jungbu Expressway and GPS-3(JCP) and GPS-5(CRCP) of LTPP data also showed that roughness of Jungbu Expressway is not inferior to that of the state. Some of section showed larger values of IRI are linked with under-9round structures for passages and drainages. The overall performance considering only roughness, the CRCP is also superior to JCP in sections with under-ground tunnels.

• Applied Biological Chemistry
• /
• v.39 no.4
• /
• pp.327-331
• /
• 1996

This experiment was conducted to establish the efficient extraction condition for anthocyanin and tannin pigments contained in rice bran of colored rices. Efficiency of the pigment extraction was maximum when the concentration of mired solvent of methanol(3) : ethanol(7) was 70%. In purple rite(anthocyanin pigment), ‘Kilimheugmi’, 80% ethanol containing 0.5% malic acid showed the highest extraction efficiency and stability with a maximum absorbance wavelength$(\lambda_{max})$ at 538 nm. In red rice(tannin pigment), ‘Jagwangdo’, 80% ethanol containing 0.01% citric acid showed the highest extraction efficiency and stability with a maximum absorbance wavelength$(\lambda_{max})$ at 456 nm. The relative optical density of the pigments increased until the solvent temperature was reached at $70^{\circ}C$, but drastically decreased over at $90^{\circ}C$ due to color change. The higher amount of the pigment was ertracted from the longer shaking time of the solvent. Ten minutes was enough for the grinding time of rite bran in solvent. Supernatant of the pigment extractives after one day storage at $4^{\circ}C$ in dark chamber revealed higher optical density than the filtration of the pigment extractives.

• Food Science and Preservation
• /
• v.23 no.1
• /
• pp.20-26
• /
• 2016

In this study, the anti-inflammatory effect of hyaluronidase (HAase) inhibition was determined from 92 species of oriental herbal medicine extracted with water and ethanol solvents because of their non-toxicity in the human body. The water extracts of Evodia officinalis (86.8%), Thuja orientalis (80.8%), Carthami semen (66.5%), Melia azedarach (74.7%), Siegesbeckia pubescens (61.3%), Saururus chinensis (49.15%) showed a relatively greater anti-inflammatory activity. The ethanol extracts of Ailanthus altissima and Saururus chinensis demonstrated the highest anti-inflammatory effect at above 90%. Saururus chinensis was selected for its high anti-inflammatory effect in both water and ethanol extract. Ethanol was more effective than water and optimal extraction conditions for phenolic compounds was determined to be extraction with 50% ethanol for 12 hours. The extracts from Saururus chinensis in optimal condition showed 70~80% anti-inflammatory effect when $100{\sim}250{\mu}g/mL$ phenolic concentration was treated. Concentration of above $500{\mu}g/mL$ decreased the inhibitory effect. The anti-inflammatory effect and extraction yield were increased by ultra-fine grind technology, indicating that this method can be used to increase the extraction yield of phenolic compounds from medicinal plants.

• Resources Recycling
• /
• v.29 no.3
• /
• pp.11-23
• /
• 2020

This study aims to investigate breakage and liberation characteristics of iron ore from Shinyemi mine, Jeongseon by ball mill. Parameters of breakage functions for three grade samples of iron ore were obtained using single-sized-feed breakage test and back-calculation based on nonlinear programming. The results showed that with the increase in the grade of iron ore, the breakage rate factor decrease whereas the particle size sensitivity decreases. This results from retardation of microcrack-propagation by magnetite grain in the ore. Breakage distribution analysis showed that the breakage mechanism appear to be impact fracture dominant with the increase of grade owing to the stress distribution effect by magnetite grain. Degree of liberation (DOL) increased with the increase in grade and decrease in particle size, respectively. Using the breakage function and size-DOL relationship, a model that can predict time-dependent-DOL is established. When scale-up factors from operating condition are available, the model is expected to be capable of predicting size and DOL with time in actual mining process.