• 해양환경안전학회지
• /
• 제26권3호
• /
• pp.254-261
• /
• 2020

Welding is the most convenient method for fabricating steel materials to build ships and of shore structures. However, welding using high heat processes inevitably produces welding displacements on welded structures. To mitigate these, heavy industries introduce various welding techniques such as back-step welding and skip-step welding. These techniques effect on the change of the distribution of high heat on welded structures, leading to a reduction of welding displacements. In the present study, various cases using different and newly introduced welding techniques are numerically simulated to ascertain the most efficient technique to minimize welding displacements. A numerical simulation using a finite element method based on the inherent strain, interface element and multi-point constraint function is introduced herein. Based on several simulation results, the optimal welding technique for minimizing welding displacements to build a general ship grillage structure is finally proposed.

• 한국항해학회지
• /
• 제12권2호
• /
• pp.68-101
• /
• 1988

In spite of the widespread use of stiffend plates in ship structures, it is very difficult to analysis these directly. So, in conventional analysis of plate structures, above structures are used to be idealized as orthotropic plate or grillage structures. Lately, the development of large computers, it is able to apply the optimum techniques to structural design. In this paper, the double bottom structure of Bulk Carrier was idealized into flat grillage which is composed of intersecting beam stiffencers primarily loaded mormal to its surface. And strength analysis was carried out by using the finite element method based on displacement. And further, according to variation of floor space and double tobbon heightm, the optimum design was carrid out by using Hooke and Jeeves direct search method.

• 전산구조공학
• /
• 제2권2호
• /
• pp.101-112
• /
• 1989

직교 이방성으로 보강된 평판 구조물 해석을 위한 방법제시가 본 논문의 주요 내용이다. 이 방법에서는 변형된 정적 압축법을 이용하여 직교 이방성으로 보강된 평판 구조물과 동등한 강성을 가지는 2차원 그릴리지 구조물을 생성하여 해석에 응용하고 있다. 대표적인 구조물을 선택하여 이론을 적용시켜 해석을 한 결과 직교 이방성으로 보강된 평판 구조물 해석에는 본 논문의 방법이 매우 효과적임이 입증되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.382-387
• /
• 2003

This research has investigated structural characteristics of curved two girder bridges proposed for AGT system and analyzed the results of the structural analysis of three different modelings for 3 span continuous bridge, each modeled in grillage modeling, simplified 3D modeling, and detailed 3D modeling respectively. The grillage modeling appeared to be somewhat underestimated in deflection and overestimated in rotation with respect to 3D modelings. Also, it is impossible to make a detailed examination of local buckling and details of cross beams, etc. The point that warping effect cannot be considered may cause the structural analysis unsafe, accordingly the structural analysis of curved two girder bridges should be done with 3D modelings.

• 한국강구조학회 논문집
• /
• 제17권5호통권78호
• /
• pp.511-518
• /
• 2005

원곡선교의 거동은 일반적인 직선교보다 복잡하여 교량의 해석 및 설계와 시공에 있어서 많은 주의를 요한다. 곡선교의 설계에는 일반적인 구조해석 프로그램이나 전용 프로그램에 의한 격자 해석이 주로 이용되는데 이들 해석 프로그램의 결과와 실제 곡선 교량의 거동에 대한 정합성을 비교 검토한 연구는 국내에서 아직까지 이뤄지지 않았다. 본 연구에서는 두 개의 교량-단경간 교량과 3경간 연속교-을 대상으로 현장 계측 및 범용 구조해석 프로그램과 3차원 정밀 해석 프로그램을 이용한 해석을 실시하여 곡선교의 거동에 대한 연구와 현 설계 방법에 대한 검증을 실시하였다. 공정별 계측과 해석 결과는 서로 정량적인 차이를 보이고 있지만 정성적으로는 유사한 관계를 가지고 있었다. 플랜지의 횡 방향에 대한 응력의 변화가 관찰되었고, 격자 해석 모델이 3차원 정밀 해석 모델보다 보수 측의 해석 결과를 갖는 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제78권4호
• /
• pp.473-484
• /
• 2021

Similar to other structures, ultimate strength values showing the maximum load that the structure can resist without damaging has great importance on ships. Therefore, increasing the ultimate strength values will be an important benefit for the structure. Low carbon steels used in ships due to their low cost and good weldability. Improving the ultimate strength values without interfering with the chemical composition to prevent of the weldability properties of these steels would be very beneficial for ships. Grain refinement via severe plastic deformation (SPD) is an essential strengthening mechanism without changing the chemical composition of metallic materials. Among SPD methods, equal channel angular pressing (ECAP) is one of the most commonly used one due to its capacity for achieving bulk ultrafine-grained (UFG) materials. When the literature is examined, it is seen that there is no study about ultimate strength calculation in ships after ECAP. Therefore, the mean purpose of this study is to apply ECAP to a shipbuilding low carbon steel to be able to achieve mechanical properties and investigate the alteration of ship hull girder grillage system's ultimate strength via finite element analysis approach. A fine-grained (FG) microstructure with a mean grain size of 6 ㎛ (initial grain size was 25 ㎛) was after ECAP. This microstructural evolution brought about a considerable increase in strength values. Both yield and tensile strength values increased from 280 MPa and 425 MPa to about 420 MPa and 785 MPa, respectively. This improvement in the strength values reflected a finite element method to determine the ultimate strength of ship hull girder grillage system. As a result of calculations, it was reached significantly higher ultimate strength values (237,876 MPa) compared the non-processed situation (192,986 MPa) on ship hull girder grillage system.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.21-24
• /
• 2011

Oil Tight Bulkhead (O. T. Bulkhead) is one of the most important structural members of oil tankers in the views of vessel's strength and safety. Therefore O.T. bulkhead's strength should be sufficient against relevant loadings, which is normally verified by local scantling requirement and structural strength analysis defined in CSR (Common Structure Rules for Double Hull Oil Tankers). However, there is a weak-able situation when the vertical stiffeners are cut due to the penetration of cargo pipes through O. T. Bulkhead. In addition, CSR does not define how to prove the strength of this case. Therefore it is necessary to verify the structural adequacy in case that several vertical stiffeners are discontinued. This article intends to prove the strength of O. T. Bulkhead with five (5) vertical stiffeners discontinued due to pipes' penetration using the grillage analysis and the finite element analysis and to provide proper reinforcement.

• 대한조선학회지
• /
• 제13권3호
• /
• pp.11-19
• /
• 1976

Grillages are abundant in ship structures and in many other types of structures such as bridges and building floors. Clarkson has shown that plated grillages can be satisfactorily analyzed as gridworks if an appropriate effective breadth is taken into account. Also, it has previously been pointed out, by Nielsen, that grillage calculations could be simplified by use of the Laplace transformation. In this paper, it is assumed that the torsional rigidity of the members and axial load are negligible, also that girders have the same scantling and spacing each other and so stiffeners do. Then the grillages composed of both-end-fixed girders and both-end-hinged stiffeners, which are subjected only to uniform normal loads are investigated. The calculus of variation is used to set up the differential equations and the Laplace transformation is applied to solve the differential equations. The program has been tested by FACOM 28 and the results show good agreements with those by the STRESS, which was developed in M.I.T.. The amount of the data input and computing time are much less than those of the STRESS. But this program has so much restrictions that it is urgent to extend the program to the grillage problems of arbitrary loading and boundary conditions.

• 한국전산구조공학회논문집
• /
• 제28권2호
• /
• pp.131-138
• /
• 2015

본 논문에서는 도로교 설계기준이 개편됨에 따라 변화된 활하중과 설계식의 검토를 하려한다. 이를 위해 강합성 플레이트 거더교와 PSC 거더교를 이용한 두 예제를 살펴본다. 기존 도로교설계기준 하중과 AASHTO LRFD 하중 그리고 새로 개편된 도로교설계기준 2015 한계상태설계법에 나온 하중을 적용하여 횡분배 계수법과 유한요소 격자해석을 통해 구한 포락선을 비교 검토한다. 또한 강합성 플레이트 거더교의 경우 중앙지간의 길이 변화에 대한 검토를 하고, PSC 거더교의 경우에는 가로보의 개수와 경간의 개수, 그리고 각 경간장의 변화를 주어 각각 그 차이점을 분석한다.

• Steel and Composite Structures
• /
• 제18권4호
• /
• pp.853-871
• /
• 2015

Up to now, Japan has more than 200 corrugated steel web composite beam bridges which are under construction and have been constructed, and China has more than 30 corrugated steel web composite beam bridges. The bridge type includes the simply supported beam, continuous beam, continuous rigid frame and cable stayed bridge etc. The section form has developed to the single box and multi-cell box girder from the original single box and single chamber. From the stress performance and cost saving, the span range of 50~150 m is the most competitive. At present, the design mostly adopts the computational analytical method combining the spatial bar system model, plane beam grillage model and solid model. However, the spatial bar system model is short of the refinement analysis on the space effect, such as the shear lag effect, effective distribution width problem, and eccentric load factor problem etc. Due to the similarity of the plane beam grillage method in the equivalence principle, it cannot accurately reflect the shearing stress distribution and local stress of the top and bottom plates of the box type composite beam. The solid model is very difficult to combine with the overall calculation. Moreover, the spatial grid model can achieve the refinement analysis, with the integrity of the analysis and the comprehensiveness of the stress checking calculation, and can make up the deficiency of the analytical method currently. Through the example verification of the solid model and spatial grid model, it can be seen that the calculation results for the stress and the displacement of two models are almost consistent, indicating the applicability and precision of the spatial grid model.