• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.2
• /
• pp.20-25
• /
• 2007

This paper describes a second-generation dual sine-grid surface encoder for 2-D position measurements. The surface encoder consisted of a 2-D grid with a 2-D sinusoidal pattern on its surface, and a 2-D angle sensor that detected the 2-D profile of the surface grid The 2-D angle sensor design of previously developed first-generation surface encoders was based on geometric optics. To improve the resolution of the surface encoder, we fabricated a 2-D sine-grid with a pitch of $10{\mu}m$. We also established a new optical model for the second-generation surface encoder that utilizes diffraction and interference to generate its measured values. The 2-D sine-grid was fabricated on a workpiece by an ultra precision lathe with the assistance of a fast tool servo. We then performed a UV-casting process to imprint the sine-grid on a transparent plastic film and constructed an experimental setup to realize the second-generation surface encoder. We conducted tests that demonstrated the feasibility of the proposed surface encoder model.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.378-381
• /
• 2003

Efficient development of method on a performance evaluation for machine tools has been regarded as the most important work for accuracy and quality enhancement to every user and manufacturer. A evaluation method of accuracy for machine tools has been studied recently according to the rapid increase of interest in precision machine tools. To this point of view, the circular interpolation test of machine tools is recognized as the most useful method to distinguish a dynamic accuracy of NC machine tools by ISO and ANSI/ASME, etc. In this paper, we have studied and developed the form measurement system with grid encoder to analyse the final accuracy of NC machine tools. we have analyzed the servo system error and geometric error of NC machine tools through measuring a dynamic error signal by this system. and then we verified the experimental result and enhanced the reliability by means of comparing the characteristics of the developed system with the kinematic ball-bar system.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.3
• /
• pp.82-84
• /
• 2008

A surface encoder based on the Half-shaded square pattern (HSSP) is presented. The HSSP working as reference grid is composed of the straight lines which are easy to be fabricated and make measuring time short. Since the periodic cell is separated in ON/OFF by the $45^{\circ}$ straight line, the duration from the starting point of scanning to the first rising edge and the duty cycle of the pulse train vary with respect to the position of the starting point. And the relationship between X and Y position and the duration, and duty cycle is described in the simple linear equation. Therefore, it is possible to measure X and Y position with the measured duration and duty cycle without calculating load. Through the test set-up, the feasibility of the proposed surface encoder was verified. Also the future works for improvement of performance were suggested.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.3
• /
• pp.547-555
• /
• 2007

In order to transmit energy generated through the stator winding of a doubly-fed induction generator (DFIG), we need to synchronize the generated voltage vector with the grid voltage vector. However, the existing synchronization methods work only when the encoder is installed at a specific position and equivalent constant is precise. In order to solve this problem, a new synchronization method has been proposed and a way of applying the method to existing doubly-fed induction generator control algorithm has been also proposed. The validities of the methods proposed were verified by using a prototype converter for a 1.5MW-class doubly-fed induction generator and experimental results showed the validity of that against variation of an encoder positions, generator parameters, and grid voltages.

• Journal of Internet Computing and Services
• /
• v.11 no.2
• /
• pp.49-60
• /
• 2010

H.264/AVC offers a better encoding efficiency than conventional video standards by adopting many new encoding techniques. However, the advanced coding techniques also add to the overall complexity for H.264/AVC encoder. Accordingly, it is necessary to perform optimization to alleviate the level of complexity for the video encoder. The amount of computation for motion estimation is of particular importance. In this paper, we propose a diamond web-grid search algorithm combined with efficient stationary block skip method which employs full diamond and dodecagon search patterns, and the variable thresholds are used for performing an effective skip of stationary blocks. The experimental results indicate that the proposed technique reduces the computations of the unsymmetrical-cross multi-hexagon-grid search algorithm by up to 12% while maintaining a similar PSNR performance.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.125-129
• /
• 2006

In order to transmit energy generated through the stator winding of a doubly-fed Induct ion generator (DFIG), we need to synchronize the generated voltage vector with the grid voltage vector. However, the existing synchronization method works only when the encoder is installed at a specific Position and equivalent constant is precise. In order to solve this Problem, a new synchronization method has been proposed and a way of applying the method to existing doubly-fed induction generator control algorithm has been also proposed. The validity of the proposed methods have been verified using a prototype converter for the control of a 1.5MW-class doubly-fed induction generator

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.7
• /
• pp.120-127
• /
• 2003

A novel three degrees of freedom sensing method utilizing binary grid pattern image and vision camera is presented. The binary grid pattern image is designed by Pseudo-Random Binary Arrays and referenced to encode in-plane position of a moving stage of the contact-free planar actuator. First, the yaw motion of the stage is detected using fast image processing and then the other planar positions, x and y, are decoded with a sequence of images. This method can be applied to the system that needs feedback of in-plane position, with advantages of a good accuracy and high resolution comparable with the encoder, a relatively compact structure, no friction, and a low cost. In this paper, all the procedures of the above sensing mechanism are described in detail, including simulation and experiment results.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.06a
• /
• pp.265-268
• /
• 2022

Video-based Point Cloud Compression(V-PCC) 부호화기의 세그먼트 정제(Refining segmentation) 과정은 3D 세그먼트를 2D 패치 데이터로 효율적으로 변환하기 위한 V-PCC 부호화기의 핵심 파트이지만, 많은 연산량을 필요로 하는 모듈이다. 때문에 이미 TMC2 에 Fast Grid-based refine segmentation 과정이 구현되어 있으나, 아직도 세그먼트 정제 기술의 연산량은 매우 높은 편이다. 본 논문에서는 현재 TMC2 에 구현되어 있는 Fast Gridbased Refine Segmentation 을 살펴보고, 복셀(Voxel) 타입에 따른 특성에 맞춰 두 가지 조건을 추가하는 고속화 알고리즘을 제안한다. 실험 결과 압축성능(BD-BR)은 TMC2 와 거의 차이를 보이지 않았지만, 모듈 단위 평균 10% 연산량이 절감되는 것을 확인하였다.

• Journal of KIISE:Software and Applications
• /
• v.31 no.9
• /
• pp.1150-1160
• /
• 2004

In this paper, we propose a new 3D video coding method for heterogeneous display systems and network infrastructure over enhanced Access Grid (e-AG) using spatio-temporal scalability defined in MPEG-2. The proposed encoder produces several bit-streams for providing temporally and spatially scalable 3D video service. The generated bit-streams can be nelivered with proper spatio-temporal resolution according to network bandwidths and processing speeds, visualization capabilities of client systems. The functionality of proposed spatio-temporal scalability can be exploited for construction of highly scalable 3D video service in heterogeneous distributed environments.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.3
• /
• pp.16-22
• /
• 2005

It is difficult to separate those of NC controller from the error of machine tools because the conventional testing methods to inspect the performance are including the errors of moving system, therefore it has been used as the methods that compare the other controllers. Also, it is hard to predict the machine itself errors with the methods assembling the NC controller and moving system on machine because of the variable load conditions. In this study, the performance inspecting system was developed by analyse the $axis\_rotating$ properties of servo system finally outputting from NC controller. The axis torque was controlled by motor dynamometer and the rotating position accuracy was measured by this developed system.