• 대한조선학회논문집
• /
• 제37권4호
• /
• pp.19-30
• /
• 2000

선수와 선미에 벌브를 가진 현대적인 상선 주위의 난류유동을 해석하기 위해 유한체적법을 이용한 RANS 방정식의 해법이 개발되었다. 복잡한 선수미의 격자계 생성을 위해 다중블록 선체표면 격자계 생성 기법이 도입되었고, 타원형 미분 방정식의 해를 이용하여 O-H 형태의 공간 격자계생성 기법이 이용되었다. 지배방정식의 대류항과 확산항은 각각 QUICK과 중앙차분법을 이용하여 근사되었고, 속도-압력 연성을 위해 SIMPLEC법이 채택되었다. 개발된 방법은 KRISO 3600TEU 컨테이너선에 적용하여 유선가시화 실험 및 반류계측 결과와 비교하였다. 계산 결과는 선수와 선미에 벌브를 가진 현대적인 선형 주위의 유동 해석을 위해서도 이러한 수치계산 방법이 적용될 수 있음을 보여주고 있다.

• Journal of Power Electronics
• /
• 제19권2호
• /
• pp.454-462
• /
• 2019

When compared to traditional bridge-type inverters, the dual-buck inverter has a higher reliability due to the fact that its bridge legs do not have a shoot-through problem. In this paper, the working principle of the dual-buck inverter is analyzed. A comparison of the working modes under full-cycle and half-cycle control is discussed. With half-cycle control, the inverter can realize a higher efficiency. However, this results in current zero-crossing distortion. The corresponding control strategy of the dual-buck inverter is proposed in order to realize both high efficiency and low current harmonic distortion. In addition, the system stability is analyzed. Dead-time is unnecessary due to the advantages of the topology. Thus, the current harmonic distortion can be further reduced. An inverter with the proposed control strategy has the advantages of high reliability, high efficiency and low current harmonic distortion. Finally, simulation and experimental results are given to verify the theoretical analysis.

• 전력전자학회논문지
• /
• 제27권5호
• /
• pp.384-390
• /
• 2022

In this study, a single-stage, four-phase, interleaved, totem-pole AC-DC converter is proposed for a super-fast charger station that requires high power, a wide voltage range, and bidirectional operation capabilities and adopts various types of electric transport vehicles. The proposed topology is based on current-fed push-pull dual active bridge converter combined with the totem-pole operation. Owing to the four-phase interleaving effect, the bridge on the grid side can switch at 0.25, 0.5, and 0.75 to achieve a ripple-free grid current. The input filter can be removed theoretically. Switching methods for the duty of the secondary-side duty cycle are proposed, and they correspond to the primary duty cycle for reducing the circulating power and handling the total harmonic distortion. Therefore, the converter can operate under a wide voltage range. Experimental results from a 7.5 kW prototype are used to validate the proposed concept.

• 전력전자학회논문지
• /
• 제26권5호
• /
• pp.325-333
• /
• 2021

A 3 kW grid-tied PV inverter with Gallium nitride high-electron mobility transistor (GaN HEMT) for domestic commercialization was developed using boost converter and full-bridge inverter with LCL filter topology. Recently, many GaN HEMTs are manufactured as surface mount packages because of their lower parasitic inductance characteristic than standard TO (transistor outline) packages. A surface mount packaged GaN HEMT releases heat through either top or bottom cooling method. IGOT60R070D1 is selected as a key power semiconductor because it has a top cooling method and fairly low thermal resistances from junction to ambient. Its characteristics allow the design of a 3 kW inverter without forced convection, thereby providing great advantages in terms of easy maintenance and high reliability. 1EDF5673K is selected as a gate driver because its driving current and negative voltage output characteristics are highly optimized for IGOT60R070D1. An LCL filter with passive damping resistor is applied to attenuate the switching frequency harmonics to the grid-tied operation. The designed LCL filter parameters are validated with PSIM simulation. A prototype of 3 kW PV inverter with GaN HEMT is constructed to verify the performance of the power conversion system. It achieved high power density of 614 W/L and peak power efficiency of 99% for the boost converter and inverter.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.387-388
• /
• 2016

본 논문은 V2G를 위한 Bidirectional OBC를 제안한다. 상용화 시 적시 적용 가능한 높은 역/전송 효율의 Bidirectional OBC 전력회로를 제안하고 베터리 전력을 입력원으로 분산형 전력공급 장치에서 요구하는 품질을 만족하는 전력 생산을 위해 계통연계 회로 및 제어 기술을 제안한다. Bidirectional OBC의 PFC Type은 양방향 구현을 위해 기존 MOSFET과 Diode로 구현된 구조와 달리 모두 IGBT를 이용하여 Single Phase Inverter를 구현 하였으며, IGBT 이용 시 예측되는 Reverse Recovery Loss 개선을 위하여 Hybrid Switch 구조를 제안 하였다. Bidirectional OBC의 DC/DC Type은 전송 및 역송에 따라 Buck동작과 Boost 동작이 가능하도록 설계 하였고 Secondary LC Resonant Topology 가변구조법을 사용 하였다.

• ETRI Journal
• /
• 제36권1호
• /
• pp.1-11
• /
• 2014

In this paper, we propose a distributed synchronization algorithm for wireless mesh networks based on orthogonal frequency division multiple access. For time and frequency synchronization, a node requests its neighbor nodes for a change of fast Fourier transform starting points, transmission times, and carrier frequencies needed for synchronization. The node also updates its own time and frequency elements through simple formulas based on request messages received from neighbor nodes using a guard interval and a cyclic prefix. This process with the cooperation of neighbor nodes leads to a gradual synchronization of all nodes in the network. Through a performance comparison with a conventional scheme, we obtain simulation results indicating that the proposed scheme outperforms the conventional scheme in random topologies and a grid topology.

• 전자공학회논문지A
• /
• 제31A권10호
• /
• pp.1-9
• /
• 1994

In this paper, we have studied optimal FCL(Frequently Called List) table sizes in a grid topology circuit-switched network including wireless subscribers. The FCL table gives the position information of a destination subscriber for a call. When the call is generated in a node, this call is routed by the referenced position information of the destination subscriber in FCL table. In this paper, we have proposed an efficient routing algorithm, mixed FSR(Flood Search Routing) and DAR(Dynamic Adaptive Routing), considering moving wireless subscribers. Also, we have simulated hit ratio and incorrect ratio as performance parameters, consequently proposed the object function composed of table search time, hit ratio, incorrect ratio, FSR time and DAR time, and derived the optimal FCL table size by using it.

• 전자공학회논문지A
• /
• 제31A권12호
• /
• pp.1-8
• /
• 1994

In this paper, we hve compare the performance of DAR(Dynamic Adaptive Routing) with that of FSR(Flooding Search Routing) to select an adequate routing protocol in circuit-switched networs. As a performance factor, we have considered call setup time, which is the key factor of performance evaluation in circuit switched networks. We have evaluated the performance of two methods in grid topology circuit-switched networks using a commn channel signaling scheme, as application examples. As results, FSR method shows better performance than DAR method under light traffic load, when the number of links by which call has passed increases, but DAR method represents better performance than FSR method under heavy traffic load or large networks because of redundant packets.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.129-130
• /
• 2010

Design of turbo-compressors has been considered to be a high-tech which only a few early industrialized countries could do efficiently since it requires not only deep understanding of high level gas dynamics and complex fluid dynamics but also accumulation of experiences in the feedback of expensive manufacturing and difficult testing to the design theory and empirical design coefficients. CFturbo is the turbomachinery design software which incorporates traditional well formulated German design technology and latest software technology of 3-dimensional graphics. Fine/Turbo is a powerful tubomachinery-oriented CFD package with quality structured grid topology templates for almost all the tubomachinery configurations for easy, fast and accurate CFD analysis. Rapid and effcient process off turbo-compressor R&D is setup with the combination of CFturbo and Fine/Turbo.

• 한국전산유체공학회지
• /
• 제18권2호
• /
• pp.41-48
• /
• 2013

Ice accretion on the solid surface is an importance factor in assessing the performance of aircraft and wind turbine blade. Changes in the external shape due to ice accretion can greatly deteriorate the aerodynamic performance. In this study, a three-dimensional upwind-type second-order positivity-preserving finite volume CFD scheme based on the unstructured mesh topology is developed to simulate two-phase flow in atmospheric icing condition. The code is then validated by comparing with NASA IRT experimental data on the sphere. The present results of the collection efficiency are found to be in close agreement with experimental data and show improvement near the stagnation region.