• 제목/요약/키워드: Green Chemistry

검색결과 944건 처리시간 0.032초

물리화학적 및 관능적 특성에 의한 국내외산 녹차의 품질평가 (Quality Evaluation of Various Green Tea by the Physico-chemical Analysis and Organoleptic Characteristics)

  • 오상룡;이상효;신동화;정동효;손태화
    • Applied Biological Chemistry
    • /
    • 제31권3호
    • /
    • pp.284-291
    • /
    • 1988
  • 국내외산 녹차 15종에 대한 이화학적 특성과 기호도를 조사하고 이들 사이의 상관관계를 구명하여 녹차의 품질영향인자를 검토하였다. 녹차의 이화학적 특성치중 탄닌, 카페인, 유리아미노함량산은 국산녹차가 외국산 녹차보다 높은 경향이었으나 클로로필함량은 일본산 녹차가 가장 높았다. 침출액의 색깔에 대한 기호도는 일본산 녹차가 가장 우수하였고 맛에 대한 기호도는 국산 볶은차가 가장 우수하였다. 이화학적 분석치와 관능평점과의 관계를 중회귀분석한 결과, 녹차의 종합적 품질에 영향을 미치는 인자는 녹차중의 카페인, 클로로필 b, 총유리아미노산함량 및 침출액의 L값 이었으며 이들 특성치에 의하여 산출한 회귀방정식은 녹차의 기호도를 89%의 신뢰도를 가지고 설명할 수 있었다.

  • PDF

임상보고 가능범위의 실증적 연구 (An Empirical Study of the Clinically Reportable Range in Clinical Chemistry)

  • 장상우;이상곤;최호성;송은영;박용원;이인애
    • 대한임상검사과학회지
    • /
    • 제39권1호
    • /
    • pp.31-36
    • /
    • 2007
  • The purpose of the clinically reportable range (CRR) in clinical chemistry is to estimate linearity in working range. The reportable range includes all results that may be reliably reported, and embraces two types of ranges: the analytical measurement range (AMR) is the range of analyte values that a method can directly measure on the specimen without any dilution, concentration, or other pretreatment not part of the usual assay process. CAP and JCAHO require linearity on analyzers every six months. The clinically reportable range is the range of analyte values that a method can measure, allowing for specimen dilution, concentration, or other pretreatment used to extend the direct analytical measurement range. The AMR cannot exceed the manufacturer's limits. Establishing AMR is easily accomplished with Calibration Verification Assessment and experimental Linearity. For example: The manufacturer states that the limits of the AST on their instrument are 0-1100. The lowest level that could be verified is 2. The upper level is 1241. The verified AMR of the instrument is 2-1241. The lower limit of the range is 2, because that is the lowest level that could be verified by the laboratory. The laboratory could not use the manufacturer's lower limit of 2 because they have not proven that the instrument values below 2 are valid. The upper limit of the range is 1241, because although the lab has shown that the instrument is linear to 1241, the manufacturer does not make that claim. The laboratory needs to demonstrate the accuracy and precision of the analyzer, as well the validation of the patient AMR. Linearity requirements have been eliminated from the CLIA regulations and from the CAP inspection criteria, however, many inspectors continue to feel that linearity studies are a part of good lab practice and should be encouraged. If a lab chooses to continue linearity studies, these studies must fully comply with the calibration/calibration verification requirements of CLIA and/or CAP. The results of lower limit and upper limit of clinically reportable range were total protein (2.1 - 79.9), albumin (1.3 - 39), total bilirubin (0.2 - 106.2), alkaline phosphatase (13 - 6928.2), aspartate aminotransferase (24 - 7446), alanine aminotransferase (13 - 6724.2), gamma glutamyl transpeptidase (16.64 - 9904.2), creatine kinase (15.26 - 4723.8), lactate dehydrogenase (127.66 - 13231.8), creatinine (0.4 - 129.6), blood urea nitrogen (8.67 - 925.8), uric acid (1.6 - 151.2), total cholesterol (48.52 - 3162), triglycerides (36.91 - 3367.8), glucose (31 - 4218), amylase (21 - 6694.2), calcium (3.1 - 118.2), inorganic phosphorus (1.11 - 108), HDL (11.74 - 666), NA (58.3 - 1800), K (1.0 - 69.6), CL (38 - 1230).

  • PDF

재생자원 유래 퓨란계 에폭시 화합물의 합성 및 접착 특성 (Synthesis of Renewable Resource-derived Furan-based Epoxy Compounds and Their Adhesive Property)

  • 이재성;이상협;정재원;김백진;조진구;김현중
    • 접착 및 계면
    • /
    • 제11권2호
    • /
    • pp.41-49
    • /
    • 2010
  • 탄소 중립형 친환경 접착소재로서, 퓨란기를 함유하는 에폭시 단량체(8, 9)를 설계하고 합성하였다. 바이오매스로부터 바이오-리파이너리 공정을 통해 쉽게 얻을 수 있는 퓨란과 메틸 아크릴레이트를 출발물질로 하여 Diels-Alder 반응을 통하여 이중고리 뼈대를 합성하였다. 이후 에스테르 작용기를 알코올로 환원한 후 에피클로로하이드린과 반응하여 에폭시기를 함유하는 새로운 퓨란계 단량체(8, 9)를 합성하였다. 구조는 $^1H$ and $^{13}C$ NMR으로 확인하였으며, UV 경화형 단량체로서의 기본적인 성질인 광경화 속도 및 광경화율은 Photo-DSC를 사용하여 확인하였다. 또한 선형가변 미분변환기(Linear Variable Differential Transformer transducer LVDT)와 UV Spot curing 장비를 통해 화합물의 경화 수축율을 측정하여 화합물의 분자구조가 경화수축율에 미치는 영향을 살펴보았으며, 각 합성 화합물을 폴리카보네이트 피착재 사이에 도포하고 광경화 후 lab shear test를 수행한 결과 3 MPa 이상의 전단강도를 보임으로써 재생자원 유래 신규 화합물이 접착소재로서 적용이 가능하다는 것을 확인하였다.

고온 고압 스팀을 주입하는 SAGD 공정에서 FeOX 무기첨가제가 오일샌드 회수율에 미치는 영향 (Effect of FeOX Inorganic Additive in SAGD Process for Oil Sand Recovery)

  • 송병진;유난숙;김지만;이철위
    • 공업화학
    • /
    • 제25권1호
    • /
    • pp.113-115
    • /
    • 2014
  • 박층의 오일샌드에서 비투멘 성분 회수를 위한 steam assisted gravity drainage 공정에서 무기첨가제 도입에 따른 오일 회수율 특성을 평가하고자 실험실 규모의 모사장치를 이용하여 모사된 오일샌드에서 오일성분을 회수하는 실험을 수행하였다. 오일샌드 모사를 위해 비투멘과 성질이 유사한 초중질유와 직경 1.5 mm의 글래스비드를 사용하였다. 무기합성법을 통해 $FeO_X$를 제조하여 무기첨가제로 도입하였다. 그 결과 시간에 따른 스팀의 열전달 속도는 무기첨가제 도입에 따라 약 40% 증가하였으며, 회수율 또한 약 30% 증가하였다.

Use of Capparis decidua Extract as a Green Inhibitor for Pure Aluminum Corrosion in Acidic Media

  • Al-Bataineh, Nezar;Al-Qudah, Mahmoud A.;Abu-Orabi, Sultan;Bataineh, Tareq;Hamaideh, Rasha S.;Al-Momani, Idrees F.;Hijazi, Ahmed K.
    • Corrosion Science and Technology
    • /
    • 제21권1호
    • /
    • pp.9-20
    • /
    • 2022
  • The aim of this paper is to study corrosion inhibition of Aluminum with Capparis decidua extract. The study was performed in a 1.0 M solution of hydrochloric acid (HCl) and was monitored both by measuring mass loss and by using electrochemical and polarization methods. A scanning electron microscopy (SEM) technique was also applied for surface morphology analysis. The results revealed high inhibition efficiency of Capparis decidua extract. Our data also determined that efficiency is governed by temperature and concentration of extract. Optimum (88.2%) inhibitor efficiency was found with maximum extract concentration at 45 o C. The results also showed a slight diminution of aluminum dissolution when the temperature is low. Based on the Langmuir adsorption model, Capparis decidua adsorption on the aluminum surface shows a high regression coefficient value. From the results, the activation enthalpy (∆H#) and activation entropy (∆S#) were estimated and discussed. In conclusion, the study clearly shows that Capparis decidua extract acted against aluminum corrosion in acidic media by forming a protective film on top of the aluminum surface.

나노구조를 갖는 중공구형 및 중공반구형 다공성 탄소 담체가 페놀 수산화 반응에 미치는 영향 및 용매 의존도 (Support Effect of Nano Structured Carbon Nano Sphere and Nano Bowl of Carbon in the Phenol Hydroxylation and its Solvent Dependence)

  • 권송이;윤성훈;김희영;이재욱;이철위
    • Korean Chemical Engineering Research
    • /
    • 제48권4호
    • /
    • pp.423-427
    • /
    • 2010
  • 나노구조를 갖는 중공구형(CNS) 및 중공반구형(NBC) 다공성 탄소 담체에 각각 약 1.0 wt%의 구리를 담지시켜 두 종류의 촉매를 제조하였고 과산화수소수에 의한 페놀의 수산화 반응에서 촉매의 성능을 두 종류의 서로 다른 용매(물, 아세토니트릴)에 대하여 비교 분석하였다. 촉매에 담지된 구리의 양은 EDS 분석으로 확인하였고 비표면적, 기공 부피, 기공 분포도 등을 비교 분석하였다. 두 종류의 촉매에서 모두 아세토니트릴보다 물에서 더 높은 전환율과 과산화수소 유효도 및 카테콜과 하이드로퀴논의 생성율을 얻을 수 있었고, 물을 용매로 사용했을 때 1.0 Cu/CNS 촉매가 1.0 Cu/NBC 촉매보다 50% 이상의 전환율과 과산화수소 유효도를 보였다.