• 제목/요약/키워드: Green Building Technology

검색결과 319건 처리시간 0.026초

폐목질 자원을 이용한 인공지반 녹화용 식생기반재의 제조조건에 관한 연구 (A Study on Manufactural Condition of Vegetation Mat for Greening Impermeable Surfaces Using Wood Waste)

  • 김대영;김미미
    • Journal of the Korean Wood Science and Technology
    • /
    • 제38권3호
    • /
    • pp.165-169
    • /
    • 2010
  • 도시 내 부족한 녹지공간을 확보하기 위하여, 기존 건물의 옥상 등 인공지반에서의 녹화가 점차 확대되어 가고 있으나 인공지반 대부분을 차지하고 있는 옥상의 경우 건물에 미치는 하중과 강우 및 관수에 관한 문제를 비롯하여 식물의 성장도 원활해야 한다는 점을 주의해야 한다. 현재 많이 사용되는 인공토양의 경우 원석을 수입하여 가공 생산하는 것으로, 앞으로 인공지반 녹화가 활성화될시 수입으로 인한 비용 등의 문제로 새로운 대체물질이 필요하다고 판단된다. 본 연구에서는 기존 녹화소재의 단점인 하중과 설치 후 유지 관리를 보완하고자 친환경 대체재료로서 폐목재칩과 폐지 슬러리를 이용한 식생기반재를 개발하고 그 제조조건에 대해 검토해보았다. 본 실험은 폐목재칩과 폐지슬러리의 혼합비와 비료의 주입농도를 달리하여 식생기반재를 제조하고 잔디와 보리를 식생기반재당 1 g씩 파종하여 성장률을 분석하는 것으로 진행되었다. 폐목재칩과 폐지 슬러리는 0.9 : 0.1~0.5 : 0.5의 비율로 혼합되었으며, 그 결과 혼합비율이 0.6 : 0.4 일 때 잔디는 약 1.5배, 보리는 약 1.9배 높은 성장률을 보였다. 또한 비료의 농도가 1%일 때 제조된 식생기반재에서 비료가 첨가되지 않았을 때보다 약 1.3~1.5배 높은 성장률을 보였다. 식생기반재의 pH는 7.1~8.8로 약알칼리성을 보였으며 주입된 비료의 농도가 높을수록, 폐목재칩의 혼합량이 많을수록 낮은 경향을 나타냈다. 그리고 비료 용찰실험 결과 비료를 첨가하지 않은 칩과 비교시 비료를 첨가한 칩에서 인, 칼륨, 몰디브덴의 성분이 높게 나온 것으로 보아 비료의 주입은 성공적임을 알 수 있었다

석탄 바닥재와 점토를 이용한 인공경량골재 제조 (Manufacturing artificial lightweight aggregates using coal bottom ash and clay)

  • 김강덕;강승구
    • 한국결정성장학회지
    • /
    • 제17권6호
    • /
    • pp.277-282
    • /
    • 2007
  • 화력발전소에서 발생하는 석탄 바닥재(bottom ash)와 점토를 혼합하여 성형 후, 소성하여 인공경량골재를 제조하고, 소성온도와 조성 변화에 따른 물성을 분석하였다. 바닥재는 입경이 4.75mm 이상인 입자가 13wt% 정도로 거친 분말로 압출성형을 위하여 미분쇄 공정이 필요하였다. 또한 바닥재는 미연탄소(C)를 다량 함유하고 있어 소결 시 C의 산화반응과 이에 따른 가스발생으로 소결체의 경량화를 유도하였다. 점토에 바닥재 첨가량이 증가할수록 소성 지수가 감소하였고 이에 따라 성형체의 성형성이 저하되었으나 바닥재 첨가량이 40wt% 까지의 성형체는 소성 지수 및 소성 한계값이 각각 약 10과 22로서 압출성형이 가능하였다. 바닥재가 $30{\sim}50wt%$ 첨가되고 $1150{\sim}1200^{\circ}C$ 범위에서 소결된 골재는 부피비중 $1.3{\sim}1.5$, 흡수율 $14{\sim}16%$를 나타냈고 따라서 고층빌딩이나 교량 등의 골재대체재로써의 가능성이 확인되었다.

환경생태계획의 도시기후 변화 대응 가능성 연구 -남양주 월산리 마스터플랜을 중심으로 (A Study on the Urban climate Mitigation Effects with Ecological Landscape Planning with reference to Namyang-Ju Walsanli Master-plan)

  • 문수영;김현수;이광복
    • KIEAE Journal
    • /
    • 제10권6호
    • /
    • pp.11-19
    • /
    • 2010
  • To meet with the nation's policy of Green Growth, local governments are rushing to propose an ecological urban development plan. And although various studies stress on the need of ecological planning to harmonize development with preservation, we have come to a point in which a quantitative evaluation of how much ecological planning contributes to the environmental load is needed. Through the increasing tendency of making plans based on the development of IT technology, capability of gathering environmental data and scientific instrument, studies on ecological planning's effect towards environmental load has recently begun. This study aims to perform a quantitative evaluation on how ecological planning mitigate urban heat island in the region of Namyang-ju Wallsanli. Three theories were used to mitigate urban heat island ; White network, Green network and Blue network. As a result, the atmosphere temperature was reduced the whole site $1.1^{\circ}C$ and partly $7^{\circ}C$ and the mean radiant temperature was reduced the whole site $1.1^{\circ}C$ and partly $8.7^{\circ}C$ on the modified ecological landscape plan in summer. The PMV index is 0~1 in ecologically modified landscape plan otherwise almost 3 in landscape plan. This study has its limits on the fact that results may differ from the actual plan as the study was performed based on the land use plan and building plan. However, what is important is that it shows a quantitative result of the effect that ecological planning has on surrounding environment and reducing environmental load.

실험을 통한 건물통합형 태양광·열(BIPVT) 시스템의 난방성능 평가 (The Heating Performance Evaluation of Heating System with Building-Integrated Photovoltaic/Thermal Collectors)

  • 정선옥;김진희;김지성;박세현;김준태
    • 한국태양에너지학회 논문집
    • /
    • 제32권6호
    • /
    • pp.113-119
    • /
    • 2012
  • The heat from PV modules should be removed for better electrical performance, and can be converted into useful thermal energy. A photovoltaic-thermal(PVT) module is a combination of PV module with a solar thermal collector which forms one device that produce thermal energy as well as electricity. In many studies various water type PVT collectors have been proposed in effort to increase their electrical and thermal efficiency. The aim of this study is to evaluate the heating performance of heating system combined with PVT collectors that on integrated building roof. For this study, the BIPVT system of 1.5kWp was installed at the experimental house, and it was incorporated with its heating system. From the experimental results, the solar fraction of the heating system with BIPVT was 15%. It was also found that was analyzed that the heating energy for the house can be reduced by 47%, as the heat gained from BIPVT system pre-heated the water used for heating system.

현장실험을 통한 축산시설로부터 배출되는 축산악취의 확산 평가 (Evaluation of Odor Dispersion from Livestock Building through Field Experiment)

  • 여욱현;이인복;하태환;데카노 크리스티나;김락우;이상연;김준규;최영배;박유미
    • 한국농공학회논문집
    • /
    • 제61권6호
    • /
    • pp.21-30
    • /
    • 2019
  • Livestock odor is comprised of mixed type of odorous compounds. Among these, ammonia ($NH_3$) and hydrogen sulfide ($H_2S$) are the two known major odor causing substances. Because high odor concentration reduces productivity of livestock and causes damage to the surrounding communities, quantitative analysis is needed to manage the odor inside and outside the livestock facilities. It is also necessary to evaluate odor dispersion according to the distance between the receptors taking into account the influence of odor source and weather condition. Therefore, in this study, we tried to evaluate the internal environment and odor dispersion from experimental pig house considering weather conditions. An experimental farm was specifically selected to eliminate the interference of odors generated by adjacent farms. $NH_3$ and complex odor were quantitatively analyzed using a gas detector and air dilution sensory method. The concentration of $NH_3$ and complex odor in pig house showed a distinct concentration difference according to the cleaning and ventilation conditions. $NH_3$ concentration and complex odor was lower than emission standard in the pig house and at the site boundary. The average $NH_3$ concentration (P1~P3) and the $NH_3$ concentration at the site boundary (S1) were strongly correlated with R=0.77. While the correlation for complex odor inside and at the site boundary had R=0.52. The correlation coefficient between $NH_3$ and the complex odor was 0.80.

고속 발사체와 충돌한 시멘트복합체의 보강재 종류에 따른 내충격 특성 연구 (Impact Resistance Characteristics of Cementitious Composites Subjected to High-velocity Projectiles with Reinforcement Types)

  • 석원균;김영선;이예찬;남정수;김규용
    • 한국건축시공학회지
    • /
    • 제23권3호
    • /
    • pp.261-272
    • /
    • 2023
  • 본 연구는 현재 늘어나고 있는 수소 충전소 및 ESS 시설 등에서 예상치 못한 사고로 발생할 수 있는 폭발 위험과 이로 인한 구조물 방호 기술의 중요성에 초점을 맞추고 있다. 시멘트 복합체의 보강 방법에 따른 내충격 특성을 평가하여 구조물의 방호 설계를 위한 기초 데이터를 제시하였다. 실험결과 가장 기본적 구조재료인 철근콘크리트는 내충격 성능에 미치는 보강효과가 무근 콘크리트에 비해 약 20% 향상되는 것으로 나타났으며, 고속충격과 같은 빠른 하중에 대해서는 국부적 보강보다는 섬유와 같이 매트릭스 전체를 보강하는 방법이 효과적인 것으로 확인되었다.

녹색건축인증을 위한 설계단계 건설사업관리자의 세부 업무(역할)별 중요도 분석 (Analysis of the Importance from Detailed Work (Role) of the Construction Manager for G-SEED Certification in the Design Phase)

  • 이두환;강성미
    • 한국건설관리학회논문집
    • /
    • 제21권6호
    • /
    • pp.103-112
    • /
    • 2020
  • 본 연구에서는 실제 업무수행 사례를 바탕으로 친환경 관련 건설사업관리 업무관리방안을 주요 단계별로 도출하였다. 이에 따라 녹색건축인증을 중심으로 심의단계, 인/허가단계, 실시설계단계의 운영 및 관리 프로세스에 대한 건설사업관리 업무 세부 내용의 중요도를 분석하였다. 또한, 녹색건축인증 공사비 분석에 대한 선행 연구 사례를 통해 추가되는 공사비와 획득 점수 비중을 근거로 주요 항목을 도출하였으며, 녹색건축인증의 주요 항목에 대한 건설사업관리 업무 세부 내용의 중요도를 분석하였다. 그 결과, 심의단계에서는 행정적인 요구사항을 만족시키기 위해 녹색건축인증과 관련한 반영 요소의 확인, 인/허가단계에서는 설계도서 적정성, 각 단계별 설계의 연계성, 실시설계단계에서는 시공단계와 직접적으로 연관된 사항들에 대한 검토 및 확인이 중요한 것으로 나타났다. 그리고 녹색건축인증의 주요 항목에 대해서는 설계도서에 관련 기술의 철저한 반영, 적정성 검토 및 확인이 중요한 것으로 나타났다. 본 연구의 결과는 기존의 설계단계 건설사업관리자 업무(역할) 세부 내용을 토대로 녹색건축인증의 운영/관리 프로세스와 주요 항목의 측면에서 효율적인 관리방안으로 활용될 수 있을 것으로 기대한다.

지리정보시스템을 활용한 CO2 인벤토리 구축 방안에 관한 연구 (A Study for Construction of CO2 Inventory Using GIS)

  • 오상학;김대욱;류지원;차재규;정응호
    • 한국지리정보학회지
    • /
    • 제14권2호
    • /
    • pp.40-52
    • /
    • 2011
  • 본 연구에서는 탄소배출 인벤토리 구축에 있어서 지리정보시스템을 활용하여 공간 특성에 따라 분포되고 있는 탄소 배출 규모를 살펴 보고자 하였다. 궁극적으로는 공간대응형 탄소배출 인벤토리를 구축함으로서 온실가스 저감형 도시 공간구조 조성을 위한 기본방향을 제시하고, 친환경적인 녹색 도시로의 변화에 기여하고자 하였다. 지리정보시스템에 입력되는 기초 Data 중 속성정보는 대구광역시 에너지 부문(전력, 도시가스)의 2009년 연간 사용량을 가지고 IPCC 가이드라인에서 제시하고 있는 Tier 1에 대입하여 $CO_2$ 배출량을 추정하였다. 공간정보는 대구광역시 건축물 대장과 지적도를 연계하여 지번에 따라 건축물 용도별로 토지이용 분류를 실시하여 구축하였다. 에너지 부문의 $CO_2$ 배출 인벤토리 구축에 지리정보시스템을 접목함으로서 공간별 $CO_2$ 배출 규모를 파악할 수 있었으며, 토지이용에 따라 $CO_2$ 배출 현황이 각기 상이한 특성을 가지고 있다는 것을 확인할 수 있었다.

건축물 내외부의 친환경 구성을 위한 입체녹화의 부문별 디자인 적용요소에 관한 연구 (A Study on the Application of Design Components of 3D Greenery System for Eco-Friendly Indoor and Outdoor Space of Buildings)

  • 신경선;김원필
    • 한국산학기술학회논문지
    • /
    • 제18권4호
    • /
    • pp.275-284
    • /
    • 2017
  • 입체녹화가 도시환경을 향상시키는 효과가 있는 것으로 알려지면서 친환경 건축물의 새로운 대안으로 부각되고 국내적용에 대한 다양한 연구가 필요해지고 있다. 본 연구의 목적은 국내외 건축물 준공사례를 대상으로 건축물 내 외부에 반영되고 있는 입체녹화의 공간특성을 조사하고 구성체계 및 디자인요소를 분석하여 친환경구성을 위한 부문별 디자인 적용요소의 발전방향을 제시하는 데 있다. 분석결과, 입체녹화는 건축물 내 다양한 외부공간을 증가시키기 위하여 대형화하는 고밀도 개발형태를 보이며 초기에는 전시, 교육 등 공공시설이 많았으나 최근에는 공동주택 사례가 증가하고 있다. 공동주거 Unit에 다양한 근접공간을 도입하고 사적 공간에서 독립적인 녹화공간을 제시하는 등 거주자의 선호조건에 따라 선택적으로 근접공간을 이용하도록 계획하는 방법은 일률적인 국내 공동주거의 디자인을 지양하고 거주자의 다양한 행위를 유도할 수 있다. 새로운 공간분위기와 다양한 옥외공간으로 인한 커뮤니티 장소들은 사회적 상호 작용을 통해 공동주거의 생활패턴을 변화시키고 새로운 마을공동체를 조성하는 방법이 될 것으로 판단된다. 또한 대지의 환경특성을 적극적으로 반영하고 건축물 형태에 자연지형과 경사로를 이용하는 경향을 뚜렷이 보이고 있어 외부공간 환경조성 디자인요소에 대한 후속 연구도 필요하다.

건물에너지 저감을 위한 향별 슬랫형 블라인드의 최적각도 제어 알고리즘 산출 (Optimized slat angle control algorithm prediction of venetian blind depending on window orientation for energy saving)

  • 권혁주;이금호;이광호
    • KIEAE Journal
    • /
    • 제17권3호
    • /
    • pp.99-106
    • /
    • 2017
  • Purpose: Most modern office buildings adopt the curtain wall system in order to provide occupants with the sense of openness and high-technology, which requires large window area. As a result, the amount of solar radiation increases, negatively affecting cooling load during the summer and increasing energy costs. However, the performance of window itself is not sufficiently controllable parameter to control thermal comfort and solar radiation. Therefore, a shading device such as venetian blind is required to control them and thus a variety of studies have been performed thus far. So, the purpose of this study is to improve the performance of blind through the development of blind control algorithm. Method: Among various input variables for the control of venetian blinds, the vertical solar radiation has been selected in this study as the primary input variable and the optimal control algorithm for venetian blinds were developed for each window orientation. Result: The developed optimal control algorithm has a positive effect on building energy savings.