한국태양에너지학회 논문집 (Journal of the Korean Solar Energy Society)

  • 제32권6호
  • /
  • Pages.113-119
  • /
  • 2012
  • /
  • 1598-6411(pISSN)
  • /
  • 2508-3562(eISSN)
한국태양에너지학회 (The Korean Solar Energy Society)
권호 표지
DOI QR코드

DOI QR Code

실험을 통한 건물통합형 태양광·열(BIPVT) 시스템의 난방성능 평가

The Heating Performance Evaluation of Heating System with Building-Integrated Photovoltaic/Thermal Collectors

  • 정선옥 (공주대학교 건축공학과 대학원) ;
  • 김진희 (공주대학교 그린홈에너지기술연구소) ;
  • 김지성 (공주대학교 건축공학과 대학원) ;
  • 박세현 (공주대학교 건축공학과 대학원) ;
  • 김준태 (공주대학교 건축학부)
  • Jeong, Seon-Ok (Dept. of Architectural Engineering, Graduate School, Kongju National University) ;
  • Kim, Jin-Hee (Green Home Energy Technology Research Center, Kongju National University) ;
  • Kim, Ji-Seong (Dept. of Architectural Engineering, Graduate School, Kongju National University) ;
  • Park, Se-Hyeon (Dept. of Architectural Engineering, Graduate School, Kongju National University) ;
  • Kim, Jun-Tae (Dept. of Architectural Engineering, Kongju National University)
  • 투고 : 2012.11.17
  • 심사 : 2012.12.21
  • 발행 : 2012.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The heat from PV modules should be removed for better electrical performance, and can be converted into useful thermal energy. A photovoltaic-thermal(PVT) module is a combination of PV module with a solar thermal collector which forms one device that produce thermal energy as well as electricity. In many studies various water type PVT collectors have been proposed in effort to increase their electrical and thermal efficiency. The aim of this study is to evaluate the heating performance of heating system combined with PVT collectors that on integrated building roof. For this study, the BIPVT system of 1.5kWp was installed at the experimental house, and it was incorporated with its heating system. From the experimental results, the solar fraction of the heating system with BIPVT was 15%. It was also found that was analyzed that the heating energy for the house can be reduced by 47%, as the heat gained from BIPVT system pre-heated the water used for heating system.

키워드

참고문헌

  1. Kim, J. H., Astudy of Energy Performance of a Building-Integrated Photovoltaic-Thermal System, a doctoral dissertation in kongju national university, 2011
  2. Kim, J.H., Kang, J.G., Kim, J.T. Experimental Performance Comparison of Water Type Glazed and Unglazed PV-Thermal Combined Collectors, korea Institute of Ecological Architect-ure and environment, Vol.9, No.4, pp.37-42, 2009.
  3. Jeong, S. O., Chun, J. A., Kim, J. H., Kim, J. T., Cho, I. S., Nam, S. B., The Experimental Performance of Rectangular Tube Absorber PV/Th-ermal Combined Collector Module, Korean Solar Energy Society, pp.87-92, 2011.
  4. Chun, J.A., Jeong, S.O., Kim, J.H., Kim, J.T., Cho, I.S., Nam, S.B., A Study on Performance of Flat Water-type PVT Modules According to Absorber Type, Korean Solar Energy Society, pp.93-98, 2011
  5. Affolter, P., Eisenmann, W., Fechner, H., Rommel, M., Schaap, A., Serensen, H., Tripanagnostopoulos, Y. and Zondag, H., PVT Roadmap; A European Guide for the Development and Market Introduction of PVThermal Technology. Energy Research Centre of the Netherlands (ECN), 2006.
  6. Ibrahim, A., Othman, M. Y., Ruslan, M. H., Mat, S. and Sopian, K., Recentadvances in flat plate photovoltaic/ thermal(PV/T) solar collectors, Renewable and Sustainable Energy Reviews, Vol.15, No.1, pp.532-365. 2011
  7. Tyagi, V. V., Kaushik, S. C. and Tyagi, S. K., Advancement in solar photovoltaic/thermal (PV/T) hybrid collector technology, Renewable and Sustainable Energy Reviews, Vol.16, No.4, pp.1383-1398, 2012 https://doi.org/10.1016/j.rser.2011.12.013
  8. Zong, H., Borg, N. and Eisenmann, W., D8-6: PVT Performance measurement guidelines, Petten: ECN and Emmerthal: ISFH, 2005