• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.5
• /
• pp.18-22
• /
• 1989

We calculate the distribution of the induced current on the strip by the TE waves on the infinite conducting strip. The boundary equations represented as the spatial domain function becomevery complicated equations including convolution integral. As we transform it to the spectral domain, we have a very simple equation expressed by some algebraic multiplication of the current density function and Green's function. It is shown that the computation result of the induced current distribution gives the optimum value, when the stop condition of iteration presented in this paper are satisfied.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.50-56
• /
• 2021

An accurate evaluation of three-dimensional (3D) Time-Domain Green Function (TDGF) in infinite water depth is essential for ship's hydrodynamic analysis. Various numerical algorithms based on the TDGF properties are considered, including the ascending series expansion at small time parameter, the asymptotic expansion at large time parameter and the Taylor series expansion combines with ordinary differential equation for the time domain analysis. An efficient method (referred as "Present Method") for a better accuracy evaluation of TDGF has been proposed. The numerical results generated from precise integration method and analytical solution of Shan et al. (2019) revealed that the "Present method" provides a better solution in the computational domain. The comparison of the heave hydrodynamic coefficients in solving the radiation problem of a hemisphere at zero speed between the "Present method" and the analytical solutions proposed by Hulme (1982) showed that the difference of result is small, less than 3%.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.5
• /
• pp.270-274
• /
• 2016

This article investigates the use of the Gaussian-channel doping profile for the control of the short-channel effects in the double-gate MOSFET whereby a two-dimensional (2D) quantum simulation was used. The simulations were completed through a self-consistent solving of the 2D Poisson equation and the Schrodinger equation within the non-equilibrium Green’s function (NEGF) formalism. The impacts of the p-type-channel Gaussian-doping profile parameters such as the peak doping concentration and the straggle parameter were studied in terms of the drain current, on-current, off-current, sub-threshold swing (SS), and drain-induced barrier lowering (DIBL). The simulation results show that the short-channel effects were improved in correspondence with incremental changes of the straggle parameter and the peak doping concentration.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.2
• /
• pp.277-281
• /
• 2009

The complex resonant frequency problem of a superconductor patch is formulated in terms of an integral equation which is the kernel of a dyadic Green's function. To include the effect of the superconductivity of the microstrip patch, the surface complex impedance of the superconductor film is introduced using the two fluids model of Gorter and Casimir. The Galerkin procedure is used in the resolution of the electric field integral equation. Numerical results concerning the effect of the operating temperature of a superconductor patch on the characteristics of the antenna are presented.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.9
• /
• pp.764-771
• /
• 2007

The objective of the present work is to evaluate the evaporation heat flux of deposited droplet on the hot surface by using of inverse heat transfer technique. On the basis of measured temperature, a integral form solution is determined for the transient temperatures beyond the two positions by using Green's function technique. This method first approximates the temperature data with a half polynomial series of time. we compared this result with constant radius model in single phase regime, nucleate boiling regime, film boiling regime respectively. this paper performed the experiments as following conditions: (a)the surface temperature is within the range between $80^{\circ}C\;and\;160^{\circ}C$ in the conduction, (b) droplet diameter are 2.4 and 3.0mm. (c) surface roughness is $0.18{\mu}m$.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.11a
• /
• pp.249-252
• /
• 2003

Scattering solutions of an H-plane T-junction in a parallel-plate waveguide are theoretically investigated. The iterative procedure and Green's function relation are used to obtain the iterative equations for the $E_{z}$ field modal coefficients, thus resulting in matrix solutions. The scattering characteristics of reflection and transmission powers are presented and compared with other existing results.s.

• Bulletin of the Korean Mathematical Society
• /
• v.54 no.2
• /
• pp.507-519
• /
• 2017

We present an upper bound on the Cheeger constant of a distance-regular graph. Recently, the authors found an upper bound on the Cheeger constant of distance-regular graph under a certain restriction in their previous work. Our new bound in the current paper is much better than the previous bound, and it is a general bound with no restriction. We point out that our bound is explicitly computable by using the valencies and the intersection matrix of a distance-regular graph. As a major tool, we use the discrete Green's function, which is defined as the inverse of ${\beta}$-Laplacian for some positive real number ${\beta}$. We present some examples of distance-regular graphs, where we compute our upper bound on their Cheeger constants.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.341-348
• /
• 2001

A Mixed Volume and Boundary Integral Equation Method is applied for the effective analysis of plane elastostatic problems in unbounded solids containing general anisotropic inclusions and voids or isotropic inclusions. It should be noted that this newly developed numerical method does not require the Green's function for anisotropic inclusions to solve this class of problems since only Green's function for the unbounded isotropic matrix is involved in their formulation for the analysis. This new method can also be applied to general two-dimensional elastodynamic and elastostatic problems with arbitrary shapes and number of anisotropic inclusions and voids or isotropic inclusions. Through the analysis of plane elastostatic problems in unbounded isotropic matrix with orthotropic inclusions and voids or isotropic inclusions, it will be established that this new method is very accurate and effective for solving plane elastic problems in unbounded solids containing general anisotropic inclusions and voids or isotropic inclusions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.9
• /
• pp.967-974
• /
• 2007

A general form solution is considered for a piezoelectric material containing impermeable cracks subjected to a combined mechanical and in-plane electrical loading. The analysis is based upon the Hilbert problem formulation. Using this solution, typically for a central crack in transverse isotropic piezoelectric material, a closed form solution is obtained, where one concentrated mechanical and electrical load is subjected to the crack surface. This problem could be used as a Green's function to generate the solutions of other problems with the same geometry but of different loading conditions.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.12
• /
• pp.55-63
• /
• 1995

By employing the concept of superimposing the induced current on partial scattere roled as a secondary source, matrix Green's function was derived. The procedure in the way of derivation presented here was based on the equivalence principle and the induction theorem and applying moment methods to the resulting electric field integral equation. As examples, the induced current on scatterers consisted of wire/plate conductor, the input impedance and gain patterns of corner reflector antenna were calculated. And computing times required for solving matrix equation were compared with those of conventional method.