• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2658-2660
• /
• 2005

This paper presents a stator winding fault diagnosis technique of induction motor on the PC - based virtual instrumentation system designed using the graphical programming language LabVIEW. This method collects the 3-phase current signals using the current probe amplifier and PXI/DAQ system then the preprocessing removes the noise using LPF, after then this method transforms the stator current to Park's vector and obtains the each Park's Vector pattern and detects stator winding fault by comparing the obtained faulted pattern with the healthy pattern. This proposed LabVIEW based diagnosis system is applied to the 3 phase 1 hp induction motor and obtained the reasonable results under no load condition. The test results give us the possibility a simple and realistic on-line winding fault diagnosis system.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.285-292
• /
• 2014

Intelligent systems are systems that mainly use knowledge rather than data or information. Therefore, knowledge representation is an important factor for intelligent system construction. Conceptual graph is a logical knowledge representation language which has graphical form and it can represent knowledge efficiently. It is, however, cumbersome to use conceptual graphs directly for programming. Various tools were developed to overcome this difficulties. In this paper, we survey on functions and characteristics of conceptual graph tools that can be utilized for constructing intelligent systems by using conceptual graphs. The result of this survey will be very helpful to use conceptual graphs for development of intelligent systems.

• Journal of the Korean Society for Railway
• /
• v.3 no.3
• /
• pp.147-153
• /
• 2000

The train control and monitoring system (TCMS) is an on board computer system in railway vehicles performing the control, supervisory and diagnostic functions of the complete train system. This system replaces a lot of hard-wired relays and minimizes the necessary vehicle wiring thus increasing the reliability of the train. It is also one of more important equipment on vehicle to implement much higher safety and reliability train system. We studied a software design technique of TCMS using a CASE tool that is a kind of safety critical software engineering tool (SCADE). This tool has mainly four functions such as the graphical editor, the document maker, tile automatically code generator, and the test simulator. The several functions of TCMS are implemented in this software easily programmed using a functional block diagram and a graphic programming language. We applied to automatically generated TCMS modules on the SCADE each functional block for the Standard type EMU in Korea. We performed the combination test using TCMS simulator and the running test in Seoul subway 7 Line. We proved that this technique is more useful for the software design of TCMS in urban transit

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.1
• /
• pp.391-406
• /
• 2015

Social media have emerged as new communication channels between consumers and companies that generate a large volume of unstructured text data. This social media content, which contains consumers' opinions and interests, is recognized as valuable material from which businesses can mine useful information; consequently, many researchers have reported on opinion-mining frameworks, methods, techniques, and tools for business intelligence over various industries. These studies sometimes focused on how to use opinion mining in business fields or emphasized methods of analyzing content to achieve results that are more accurate. They also considered how to visualize the results to ensure easier understanding. However, we found that such approaches are often technically complex and insufficiently user-friendly to help with business decisions and planning. Therefore, in this study we attempt to formulate a more comprehensive and practical methodology to conduct social media opinion mining and apply our methodology to a case study of the oldest instant noodle product in Korea. We also present graphical tools and visualized outputs that include volume and sentiment graphs, time-series graphs, a topic word cloud, a heat map, and a valence tree map with a classification. Our resources are from public-domain social media content such as blogs, forum messages, and news articles that we analyze with natural language processing, statistics, and graphics packages in the freeware R project environment. We believe our methodology and visualization outputs can provide a practical and reliable guide for immediate use, not just in the food industry but other industries as well.

• Journal of Environmental Impact Assessment
• /
• v.20 no.5
• /
• pp.765-777
• /
• 2011

According to the total pollution load management system, exact prediction and analysis of water quality and discharge has been required in order to allocate the amount of pollution load to each local government. In this study, QUAL2E model was used for comparison with other water quality models and improve the inadequate to forecast future water quality. And Various calibration and verification methods were applied to deal with existing uncertainties of parameter during modeling water quality. For user convenience, A GUI(Graphical User Interface) system named "QL2-XP" model is developed by object-oriented language for the user convenience and practical usage. Suggested GUI system consist of hydraulic analysis, water quality analysis, optimized model calibration processes, and postprocessing the simulation results. Therefore this model will be effectively utilized to manage practical and efficient water quality.

• Journal of Drive and Control
• /
• v.9 no.4
• /
• pp.32-41
• /
• 2012

Most diagnosis methods for servo valves requires installing spool displacement sensor or flow sensor as well as pressure sensor. The measurement of flow is hard to implement and many kinds of servovalves or proportional direction valves do not have a built-in spool displacement sensor. In this study, static performances of servovalve or proportional-direction-valve are studied theoretically and a diagnosis technique, which uses only load pressure and input current signal, is assessed. An experimental setup was made based upon a personal computer and the LabVIEW graphical language. A series of diagnosis tests were performed and the analysis results showed it possible to measure the pressure gain, hysteresis and null bias in a relatively simple methodology.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.788-791
• /
• 2002

The present Web surroundings is composed of HTML(Hypertext Mark-up Language) and thereby users obtains web informations mainly in GUI(Graphical User Interface) environment by clicking mouse in order to keep up with hyperlinked informations. However it is very inconvenient to work in this environment comparing with easily accessed one in which human's voice is utilized for obtaining informations. Using VoiceXML, resulted from XML, for supplying the information through telephone on the basis of the contemporary matured technology of voice recognition/synthesis to work out the inconvenience problem, this paper presents the research results about VoiceXML Web Browser designed and implemented for realizing its technology.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.2
• /
• pp.91-95
• /
• 2008

The large AC generator fault may lead to large impacts or perturbations in power system. The generator protection control systems in Korea have been imported and operated through a turn-key from overseas entirely. Therefore a study of the generator protection field has in urgent need for a stable operation of the imported goods. In present, the algorithm using the current ratio differential relaying based DFT for stator winding protection or a fault detection had been applied that of internal fault protection of a generator. the DFT used for the analysis of transient state signal conventionally had defects losing a time information in the course of transforming a target signal to frequency domain. In this paper, the discrete wavelet transform (DWT) was applied a fault detection of the generator being superior to a transient state signal analysis and being easy to real time realization. The fault signals after executing a terminal fault modeling collect using a MATLAB package, and calculate the wavelet coefficients through the process of a muiti-level decomposition (MLD). The proposed algorithm for a fault detection using the Daubechies WT (wavelet transform) was executed with a C language and the commend line function for the real time realization after analyzing MATLAB's graphical interface. The advanced technique had improved faster a speed of fault discrimination than a conventional DFR based on DFT.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1997.04a
• /
• pp.23-28
• /
• 1997

We discuss development of a simulator for automated manufacturing systems (AMSs) which have sophisticated automated material handling equipments and complicated work flows. The simulator is designed to satisfy the following requirements. A user should be able to easily configure or specify an AMS through a graphical user interface (GUI) and minimal data input. The user should be able to model diverse and complied control logic for automated material handling systems like automated guided vehicle (AGV) systems, robot workcell systems and conveyor systems as well as complicated job flow program. Real time animation is desired. Finally, the simulator should be easily maintained and extended. To satisfy the requirements, we use an object-oriented paradigm for modeling, designing, and programming of the simulator. We use an object-oriented modeling framework to design the modeling elements library, and take the process interaction approach for scheduling processes and events. To model a user-defined diverse control logic, we also develop a script language and its interpreter. We explain design and implementation strategies. We implement the simulator using Visual C++ 4.2 and Open GL on Windows NT and the Windows95. Some modeling examples will be demonstrated.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.10
• /
• pp.1435-1441
• /
• 2013

This paper deals a watt-hour meter monitor system applying a Power Line Communication (PLC) MODEM and a Data Concentrator Unit (DCU) which can apply to Internet map based Graphical User Interface (GUI). The PLC MODEM is profitable by saving the cost of installing dedicated wiring, and Internet map GUI also is able to contribute an easy access to monitoring system for non export users. This system makes it possible to monitor the amount of electricity of previous/ current month metering data via Internet mapping service. The implement system can easily apply a PC-management for the electric charges and maintenance with gathering the metering data.