• Proceedings of the Korean Society of Crop Science Conference
• /
• 2004.04a
• /
• pp.100-101
• /
• 2004

[ $\bigcirc$ ] In the growth simulation using genetic coefficients calculated with fooled data under various condition, WAGT was not higher and LAI, WLVG, WSO were higher, but WST was similar before grain-filling stage after the became lower because of higher translocation of carbohydrates than in the growth simulation using genetic coefficients calculated with data under high nitrogen applicated condition. $\bigcirc$ Genetic coefficients should be calculated with data showing potential in ORYZA2000, but under 180 kg and 240 kg N condition in 2003, plants were infected by panicle blast and also yield was not higher than under 120 kg N condition showing not potential condition and therefore not appropriate for genetic coefficients estimation compared with pooled data from various condition.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2004.04a
• /
• pp.112-113
• /
• 2004

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.299-302
• /
• 2005

Semisolid A356 slurries were prepared by electromagnetic stirring casting and by inoculation of Al-5Ti-B master alloy. As stirring time and addition of Al-5Ti-B are different, the grain size of the primary phase is different. Through the experiment of rheocast in a Buhler horizontal die casting machine, it was found that the finer the equiaxed primary dendrites, the smoother the die filling and better cast quality. Small equiaxed primary dendrite also results in less liquid segregation on the surface.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.8
• /
• pp.2458-2467
• /
• 1996

The rigid-plastic finite element analysis was performed for analysis of ofhot forging and cold sizing of a bevel gear. Two dimensional analysis was carried out to investigate the defect occurrence on vertical symmetric planes during hot forging and three dimensional analysis was to understand the filling behavior on horizontal planes during cold sizing. The involute curve of a tooth was approximated by a circle for convenience in the present analysis. In order to estimate the elastic deformation of the gear and dies during cold sizing, linear elastic finite element analysis was performed. Results of the analysis can be used to predict grain flows and strength distributions in the forged gear, and to design dies and an appropriate preform for the cold sizing.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2020.06a
• /
• pp.177-177
• /
• 2020

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.04a
• /
• pp.120-120
• /
• 2022

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.1
• /
• pp.135-143
• /
• 2018

The effect of elevated temperature on temperate paddy rice will be significant for dependable food supply in East Asia. Using temperature gradient field chamber (TGFC), which was designed to make the horizontal air temperature gradient by $0^{\circ}C$ to $3^{\circ}C$ higher than outside, we examined the measurement to understand the effects of extremely high temperature on paddy rice. In particular, the data of the year 2016, the worst heat wave in over 22 years, was analyzed in this study. The rice height in the relatively warmed condition was rapidly increased during early growth stage. However, the average grain weight and number of spikelet per panicle in the warmed chamber condition were gradually declined with increasing air temperature averaged for 40 days after first heading in each chamber. In particular, the grain yield was more dramatically decreased by the raising temperature because the percent ripened grain was quickly dropped as getting over the threshold temperature for pollination. Therefore, the surplus photosynthetic product by such lower grain filling rate may disturbed the decreases of the NDVI (Normalized Difference Vegetation Index) and SPAD chlorophyll values after first (normal) heading. In addition, the late-emerging head grain were appeared. However, this yield was too small to recover the normal yields decreased by extremely high temperature condition. Our result represented that the warmed condition in 2016 would be the critical limit for the stable yield of temperate paddy rice.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.3
• /
• pp.205-209
• /
• 2018

'Saemimyeon,' a Tongil-type rice variety (Indica x Japonica), containing high amylose content, is suitable for rice noodle production. Currently, the major parts of the rice processing industry that include products such as rice flour and noodles are expected to partially replace the wheat flour market. The volume of the rice noodle market is growing and can contribute to the rice surplus problems and farmer's income. This study was carried out to promote productivity of 'Saemimyeon' by finding the most suitable transplanting times in Youngnam Province. The transplanting times were May $10^{th}$, May $17^{th}$, May $24^{th}$, May $31^{th}$, June $7^{th}$, and June $14^{th}$ and the planting distance was $30{\times}12cm$. The field experiment was conducted in the Miryang region (southern plain region of Korea) from 2015 to 2017. Our results suggested that the optimum transplanting dates were from May $17^{th}$ to May $31^{th}$, which resulted in an average yield of 750 kg/10 a. The average grain filling rate before May $31^{th}$ was more than 83% and it declined to 75% after June $7^{th}$. The average temperature range from heading to harvesting time was $21{\sim}25^{\circ}C$ and the estimated optimal temperature was $24^{\circ}C$, which is similar to that of May $24^{th}$ by regression equation. It is suggested that low temperature at seed maturation time caused the lower grain filling rate, and therefore 'Saemimyeon' needed to be transplanted before May $31^{th}$ for higher productivity. Estimated optimal transplanting time based on temperature was 1 ~ 2 weeks earlier than the optimum transplanting time for common japonica rice cultivars in Youngnam Province.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.4
• /
• pp.395-405
• /
• 2019

A recent assessment by the Intergovernmental Panel on Climate Change projected that the global average surface temperature will increase by a value 1.5℃ from 2030 to 2052. In this study, we used a temperature gradient chamber that mimicked field conditions to evaluate the effect of increased air temperature on phenology, yield components, protein content, and oil content, to assess soybean growth. In 2017 and 2018, 'Deawonkong', 'Pungsannamulkong', and 'Deapungkong' cultivars were grown in three temperature gradient chambers. Four temperature treatment groups were established by dividing the rows along temperature regimes: ambient temperature + 1℃ (aT+1), ambient temperature + 2℃ (aT+2), ambient temperature + 3℃ (aT+3), ambient temperature + 4℃ (aT+4). Year, cultivar, and temperature treatments significantly affected yield components and seed yield. In 2017, the flowering stage of 'Deawon' and 'Pungsannamul' cultivars in the aT+4 group was delayed compared to the flowering stage of those in the aT+1 group. In 2018, the flowering stage of 'Deawon' and 'Pungsannamul' was delayed at all temperature gradients, owing to high temperature stress, whereas 'Deapung' was regularly flowering in 2017 and 2018. The duration of the grain filling period was six days shorter in 2018 than in 2017 because of high temperature stress. The total number of pods per ㎡ for 'Deawon' and 'Pungsannamul' was 48.8 and 41.5% lower in 2018 than in 2017, respectively, whereas 'Deapung' increased by 6.3%. The 100-seed weight of 'Deawon' and 'Deapung' was 29.2 and 32.1% lower, respectively. However, 'Pungsannamul' decreased by 14.7%. The protein and oil content was lower during the grain filling period in 2018 than in the same period in 2017 because of high temperature stress. In contrast, the oil content in 'Deapung' was higher in 2018 than in 2017. Our results showed that increased temperature during the grain filling period was significantly and negatively correlated with pod number, 100-seed weight, protein content, and oil content.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.2
• /
• pp.260-267
• /
• 1995

In temperate zone planting rice at different date subjects the Crop to different climatic condition. The present study aimed at comparison of the change in source-sink relationship of the Japonica(J) and that of IndicaxJaponica(I$\times$J) type rice cultivars caused by shift of heading date. Two J- and two I$\times$J-type cultivars were made to head on August 16, August 26, and September 5. Sink capacity was changed by shift of heading date in different mode between the types of cultivars. In both types major determinant of sink capacity was number of effective tillers, and the number of spikelets per panicle was the minor. In J-type earlier planting/heading was beneficial to increased panicle numbers and this was due mainly to a larger diurnal difference in temperature. I$\times$J-type cultivars favored a higher daily mean temperature to increase the sink capacity. The ability of source at heading, in terms of leaf area per panicle, chlorophyll content per spiklet, photosynthetic ability of leaves per unit area at 25$\^{\circ}C$, carbohydrate and N contents of leaves, was not so different among different heading dates in both types. However, the source activity was governed principally by temperature during grain filling. The J-type cultivars headed on Sept. 5 and I$\times$J-type cultivars headed later than August 16 could not have had sufficient source activity in grain filling due to lower temperature.