Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)
- Volume 20 Issue 8
- /
- Pages.2458-2467
- /
- 1996
- /
- 1226-4873(pISSN)
- /
- 2288-5226(eISSN)
DOI QR Code
FEM Analysis of Closed-Die Forging of a Bevel Gear
베벨기어 페쇄단조의 유한요소해석
- Park, Jong-Jin (Department of Mechanical Engineering, Hong-Ik University) ;
- Lee, Jung-Hwan (Korea Institute of Machinery and Materials) ;
- Lee, Young-Sun (Korea Institute of Machinery and Materials)
- Published : 1996.08.01
Abstract
The rigid-plastic finite element analysis was performed for analysis of ofhot forging and cold sizing of a bevel gear. Two dimensional analysis was carried out to investigate the defect occurrence on vertical symmetric planes during hot forging and three dimensional analysis was to understand the filling behavior on horizontal planes during cold sizing. The involute curve of a tooth was approximated by a circle for convenience in the present analysis. In order to estimate the elastic deformation of the gear and dies during cold sizing, linear elastic finite element analysis was performed. Results of the analysis can be used to predict grain flows and strength distributions in the forged gear, and to design dies and an appropriate preform for the cold sizing.
Keywords