• The Korean Journal of Nuclear Medicine
• /
• v.32 no.5
• /
• pp.403-413
• /
• 1998

Purpose: We investigated reproducibility of the quantification of left ventricular volume and ejection fraction, and grading of myocardial wall motion and systolic thickening when we used gated myocardial SPECT and Cedars quantification software. Materials and Methods: We performed gated myocardial SPECT in 33 consecutive patients twice in the same position after Tc-99m-MIBI SPECT We used 16 frames per cycle for the gating of sequential Tc-99m-MIBI SPECT. After reconstruction, we used Cedars quantitative gated SPECT and calculated ventricular volume and ejection fraction (EF). Wall motion was graded using 5 point score. Wall thickening was graded using 4 point score. Coefficient of variation for re-examination of volume and fraction were calculated. Kappa values (k-value) for assessing reproducibility of wall motion or wall thickening were calculated. Results: Enddiastolic volumes (EDV) ranged from 58 ml to 248 ml (122 ml +/- 42 ml), endsystolic volumes (ESV) from 20 ml to 174 ml (65 ml +/- 39 ml), and EF from 20% to 65% (51% +/- 14%). Geometric mean of standard deviations of 33 patients was 5.0 ml for EDV, 3.9 ml for ESV and 1.9% for EF. Their average differences were not different from zero (p>0.05). k-value for wall motion using 2 consecutive images was 0.76 (confidence interval: 0.71-0.81). k-value was 0.87 (confidence interval: 0.83-0.90) for assessment of wall thickening. Conclusion: We concluded that quantification of functional indices, assessment of wall motion and wall thickening using gated Tc-99m-MIBI SPECT was reproducible and we could use this method for the evaluation of short-acting drug effect.

• The Korean Journal of Nuclear Medicine
• /
• v.33 no.6
• /
• pp.484-492
• /
• 1999

Purpose: This study was to evaluate the clinical usefulness of $^{99m}Tc$-MDP bone scintigraphy for assessing vascular ingrowth into the ocular implants after enucleation or evisceration. Materials and Methods: Twenty-four patients (M:F=7:17, mean age: 36 years), who buried a coralline hydroxyapatite after uncomplicated enucleation or evisceration surgery were studied. Dynamic and static scintigraphy on the orbit fossa were obtained after injection of 740 MBq $^{99m}Tc$-MDP to evaluate the status of vascularization. The study was performed from the 3 to 33 weeks after surgery. According to the visual analysis, activity greater than nasal bridge was graded as 4, equal to the nasal bridge as 3, less than nasal bridge but greater than normal orbit as 2, greater than normal orbit but less than grade 2 as 1. Uptake ratio was also calculated by measuring the implants activity (H) and contralateral orbit activity (N). Grading score and uptake ratio were compared with clinical outcome of vascularization. Additionally, we also analyzed the vascularization status as time lapse between primary surgery and scintigraphic study and surgical methods. Results: Twenty-one patients who had bone scintigraphy at 11 weeks after surgery showed increased uptake above grade 2 and greater H/N ratio than 1.16. Of these, 19 patients who had drilling surgery for permanent peg application showed adequate bleeding during the procedure. The activity grade and uptake ratio were inversely correlated with vascular ingrowth. Higher than grade 2 or greater than 1.56 in H/N ratio seemed to be an indicator for better prognosis. Accomplishment of vascularization was not affected by the surgical way such as enucleation or evisceration. Conclusion: $^{99m}Tc$-MDP bone scintigraphy can be a useful method to evaluate the vascularized status of implants. Adequate time for $^{99m}Tc$-MDP bone scintigraphy may be 11-20 weeks after enucleation or evisceration.

• Journal of Chest Surgery
• /
• v.38 no.3 s.248
• /
• pp.191-196
• /
• 2005

We analysed the characteristics of anastomotic sites after coronary artery bypass grafting (CABG) using coronary angiographies (CAGs) performed at one and five years postoperatively in the same patient population. Material and Method: Among the 219 patients who underwent isolated CABGs between January 1995 and December 1997, follow-up coronary angiograms were performed in 149 ($75.3\%$) patients at one year and in 115 ($58.1\%$) patients at five years postoperatively. FitzGibbon grading system was used to evaluate the anastomotic sites. Result: The patency rates of arterial grafts at one- and five-year were $96.5\%$ (192/199) and $93.1\%$ (134/144), which were higher than those of saphenous vein grafts (SVGs) ($82.9\%$ (224/270) and $77.5\%$ (141/182), respectively) (p=0.01). Although there were significant decreases in the patency rates between one- and five-year CAGs of both arterial and venous grafts, the proportion of FitzGibbon grade B among the SVGs was increased from $5.2\%$ (one-year) to $8.2\%$ (five-year), suggesting the progression of vein graft disease (p < 0.01). Conclusion: The patency rate of the arterial graft was higher than that of SVG in both one- and five-year CAGs. The attrition rate of saphenous vein graft was higher than arterial grafts.

• Journal of Animal Science and Technology
• /
• v.50 no.5
• /
• pp.613-620
• /
• 2008

The genetic parameters used in National Hanwoo Genetic Evaluation(NHGE) were needed to be monitored and updated periodically for accounting any possible changes in population parameters due to selection and environmental changes. Genetic parameters were estimated with single and two-trait models with MTDFREML package using 2,791 carcass records of steers collected from Hanwoo Progeny Test Program(HPTP). Single and two-trait models gave similar parameter estimates for all traits. The heritability estimates from single and two-trait models for carcass weight(CW), dressing percentage(DP), eye muscle area(EMA), back fat thickness(BFT) and marbling score(MS) were 0.30, 0.30, 0.37, 0.44 and 0.44, respectively. The heritability estimates for all the traits except BFT were slightly lower than those used in NHGE but seemed to be within the acceptable ranges. However, further monitoring is needed because the data might not have fully reflected the changes such as carcass grading standards in performance testing program. In order to shift statistical model of NHGE from single trait model to multiple-trait model, the genetic correlations between carcass traits were estimated with pairwise two-trait models. The genetic correlation coefficients between CW and DP, between CW and EMA, between CW and BFT and between CW and MS were 0.44, 0.63, 0.17 and 0.06, respectively. Those between DP and EMA, between DP and BFT and between DP and MS were 0.29, 0.40 and 0.20. Those between EMA and BFT and between EMA and MS were －0.24 and 0.15, respectively. The genetic correlation coefficient between BFT and MS was 0.03.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.129-137
• /
• 2005

In Korea, due to the insufficiency of natural aggregates and increasing needs of crushed stones, it is necessary to examine the alkali-silica reaction of the crushed stones. The reaction produces an alkali-silica reaction gel which can imbibe pore solution and swell to generate cracks that are visible In affected concrete. In general, crushed stones are tested by petrograptuc examination, chemical method and mortar-bar method, but the most reliable method Is mortar-bar test. This study tested alkali-silica reactivity of crushed stones of various rock types using ASTM C 227 and C 1260, and compared the results of two test methods. This study also analyzed effects of particle size and grading of reactive aggregate on alkali-silica reaction expansion of mortar-bar. The effectiveness of mineral admixtures to reduce detrimental expansion caused by alkali-silica reaction was investigated through the ASTM C 1260 method. The mineral admixtures used were nv ash, silica fume, metakaolin and ground granulated blast furnace slag. The replacement ratios of 0, 5, 10, 15, 25 and $35\%$ were commonly applied for all the mineral admixtures and the replacement ratios of 45 and $55\%$ were additional applied for the admixtures that could maintain workability. The results indicate that replacement ratios of $25\%$ for ay ash, $10\%$ for silica fume, $25\%$ for metakaolin or $35\%$ for ground granulated blast furnace slag were most effective to reduce alkali-silica reaction expansion under the experimental conditions.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.785-792
• /
• 2005

This study is to examine the influence of defective grain shape of coarse aggregate and lowered fineness modulus of fine aggregate on the characteristics of high flowing concrete. The flow ability and compact ability of high flowing concrete was examined using fine aggregate, varying its fineness modulus to 2.0, 2.5, 3.0, and 3.5, and coarse aggregate with before and after grain shape improvement. Also the influence of fineness modulus of fine aggregate and grain shape of coarse aggregate on dispersion distance of particles of aggregate was examined by relatively comparing the dispersion distance between particles of aggregate. According to the experimental result, minimum porosity when mixing fine aggregate and coarse aggregate was shown in order of fineness modulus of fine aggregate, 3.0, 2.5, 2.0, 3.5, regardless of the improvement of grain shape. So when the fineness modulus is bigger or smaller than KS Standard $2.3\~3.1$, the porosity increased. When the spherical rate of the grain shape of coarse aggregate unproved from 0.69, a disk shape to 0.78 sphere shape, the rate of fine aggregate, which represents minimum porosity, decreased $6\%$ from $47\%\;to\;41\%$. The 28 days compressive strength according to fineness modulus of fine aggregate increased about 3 ma as the fineness modulus increased from 2.0 to 2,5, and 3.0. However, the 28 days compressive strength decreased about 9 ma at 3.5 fineness modulus as compared with 3.0 fineness modulus. The improvement of grain shape in coarse aggregate and increase of fineness modulus in fine aggregate made the flow ability, compact ability, and V-rod flowing time improve. Also the fineness modulus of fine aggregate increased the paste volume ratio when a higher value was used within the scope of KS Standard $2.3\~3.1$.

• Korean Journal of Cognitive Science
• /
• v.28 no.4
• /
• pp.315-328
• /
• 2017

Even though assessment using information and communication technology will most likely lead the future of educational assessment, there is little domestic research on this topic. Computerized assessment will not only cut costs but also measure students' performance in ways not possible before. In this context, this study introduces a tool which can overcome the problems of multiple choice tests, which are most widely used type of assessment in current Korean educational setting. Multiple-choice tests, in which options are presented with the questions, are efficient in that grading can be automated; however, they allow for students who don't know the answer, to find the correct answer from the options. Park(2005) has developed a modified multiple-choice testing system (CMMT) using the interactivity of computers, that presents questions first, and options later for a short time when the student requests for them. The present study was conducted to find out if penalizing wrong answers could lower the possibility of students choosing an answer among the options when they don't know the correct answer. 116 students were tested with the directions that they will be penalized for wrong answers, but not for no response. There were 4 experimental conditions: 2 conditions of high or low percentage of penalizing, each in traditional multiple-choice or CMMT format. The results were analyzed using a two-way ANOVA for the number of no response, the test score and self-report score. Analysis showed that the number of no response was significantly higher for the CMMT format and that test scores were significantly lower when the penalizing percentage was high. The possibility of applying CMMT format tests while penalizing wrong answers in actual testing settings was addressed. In addition, the need for further research in the cognitive sciences to develop computerized assessment tools, was discussed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.4
• /
• pp.83-97
• /
• 2011

In this study, space allocation with an assessment system for improving the function of the ecological use and function of each space was undertaken to suggest appropriate goals and directions. Ogeum Park, used as the study site, is a stronghold green zone located in the fan-shaped area of the Songpa-gu green zone on a 22ha area site. The assessment system for this study consisted of a total of 3 steps: Step 1 includes the division of the spatial block, Step 2 assesses the proper functioning of each spatial block, while Step 3 includes space allocation and presents improvements for function by space. This study performed a basin analysis with the consideration that Ogeum Park is a forest area and divided the site into a total of 8 areas according to how the sections of land are used. The function of wildlife habitat included an analysis of plant ecology(vegetation type, vegetation layer, potential vegetation), animal ecology(wild birds), and waterways. The function of leisure and use included an analysis of gradients, noise, paths, status of use, and status of facilities. The evaluation of the function of habitat sorted items into native vegetation, vegetation diversification, vegetation potential, animal diversification and potential of animal habitats. The results of grading the evaluation scores by space in the function of habitat showed that the Areas IV and VII, which were 90% of the maximum point, were Grade A, Areas II and V were Grade B at 70% and Area I and VI were Grade C at 50%. Areas III and VIII, which were not found to be beyond the standard of 50%, were excluded. The evaluation of the functions of leisure and use classified items into use potential, use preference, use concentration, use diversification and use convenience. The results of the graded evaluation scores by space in use function, showed areas V and VI as Grade A, or 90% of the maximum score. Grade B, 70% of the maximum score, was given to Areas I and VII. Grade C, 50% of the maximum score, included Areas II, IV and VIII. Area III, graded lower the standard of 50%, was excluded. The study evaluated areas according to a common standard, classified spaces by proper functions into ecological spaces, environmentally-friendly use spaces and use spaces according to the standard of spatial distribution on the basis of the above results through a synthesis of grades of habitat function, leisure function and use. This offers ideas for the improvement of wildlife habitat and environment-friendly use functions by space.

• Journal of Animal Science and Technology
• /
• v.55 no.5
• /
• pp.351-358
• /
• 2013

This study was conducted to estimate the correlation structure between body size traits, carcass traits, and primal cuts in Hanwoo steers. Hanwoo progeny test data (body weight and body measurements) were collected from 2008 to 2010 from a total of 882 steers at the Hanwoo Improvement Main Center (NACF). Carcass traits considered were cold carcass weight, eye muscle area, backfat thickness, and marbling scores evaluated at the time of carcass grading. Correlation analyses were performed with observed scales of the traits and with residuals considering fixed environmental effects in generalized linear models. The correlation coefficient estimated between loin weight and chest girth was high at 0.74. The shank negatively correlated with pelvic width (-0.23) and hipbone width (-0.27). In addition, rib weight and chest girth was highly correlated (0.80). The correlation between carcass weight and chest girth was 0.86 in observed scale. Residual correlation between these traits was estimated at 0.65. Correlation between carcass weight and loin was 0.87 in the observed scale. Residual correlation was estimated at 0.83. The correlation coefficient estimated between shank weight and brisket and flank weight was negative at -0.69. Chest girth had a high correlation between primal cuts weight and body measurements. Thus, we believe that these results will provide a greater understanding on the relationship of primal cuts and other phenotypes, thus enabling valid production models for Hanwoo steers.

• Journal of Animal Science and Technology
• /
• v.48 no.4
• /
• pp.493-502
• /
• 2006

The slaughter weight (wt) is a most important economic factor in swine roduction. The present study was undertaken to determine if it is feasible to increase the slaughter wt of finishing pigs to 130kg without significantly affecting the growth efficiency and carcass quality. One hundred and sixty gilts and 160 barrows born from lean-type Yorkshire×Landrace (YL)-dam and Duroc (D)-sire lines, which are most widely used for terminal breeding for pork production in Gyeongsangnam-do, were randomly allocated into 16 pens under a 2 (sex)×2 (slaughter wt; 110 vs. 130kg) factorial arrangement of treatments. The animals were fed ad libitum a diet containing 3,200kcal DE/kg and 15.5% crude protein. After slaughter at the predetermined wt, yields of trimmed primal cuts and physicochemical characteristics of the longissimus dorsi muscle (LD) were measured or analyzed. Average daily gain was greater (P<0.01) in barrows than in gilts (0.86 vs. 0.79kg), but it was not different between the 110- and 130-kg slaughter wt groups (P>0.05). Backfat thickness was greater in the 130- vs. 110-kg group in both sexes (gilts: 21.6 vs. 17.6 mm, barrows: 25.1 vs. 20.8 mm). The yield percentage of belly was greater in barrows than in gilts (21.2 vs. 20.5%) and also in the 130-kg vs. 110-kg group (21.4 vs. 20.2%). Major physicochemical characteristics of LD including the color, percentage of 48-h drip loss, 24-h pH and percentages of crude protein and fat were not influenced by slaughter wt. Marginal profit of the 130-kg vs. 110-kg market pig was approximately 󰠏20,000 won/head, which resulted primarily from the heavy carcass weight of the former exceeding the upper limit of the A- or B-grade. However, if it had not been for the carcass weight limit of the current grading system, a 130-kg market pig would have had a potential marginal profit greater than 20,000 won. Results suggest that slaughter wt of lean-line finishing pigs can be increased to 130kg without significantly compromising the growth efficiency and carcass quality and accordingly, the upper weight limit of the ‘good-grade’ carcass needs to be increased or abolished to accommodate the larger market pigs.