• Journal of Microbiology and Biotechnology
• /
• 제17권11호
• /
• pp.1880-1884
• /
• 2007

This study was conducted to find the optimum extraction condition of Gold-Thread for antibacterial activity against Streptococcus mutans using The evolutionary operation-factorial design technique. Higher antibacterial activity was achieved in a higher extraction temperature ($R^2=-0.79$) and in a longer extraction time ($R^2=-0.71$). Antibacterial activity was not affected by differentiation of the ethanol concentration in the extraction solvent ($R^2=-0.12$). The maximum antibacterial activity of clove against S. mutans determined by the EVOP-factorial technique was obtained at $80^{\circ}C$ extraction temperature, 26 h extraction time, and 50% ethanol concentration. The population of S. mutans decreased from 6.110 logCFU/ml in the initial set to 4.125 logCFU/ml in the third set.

• 보존과학회지
• /
• 제37권5호
• /
• pp.525-535
• /
• 2021

본 연구는 동궁비 원삼의 직금단과 자수에 사용된 금사를 대상으로 과학적 분석을 통해 재료적 특성을 파악하였다. 동궁비 원삼의 금사 배지는 비목질계 섬유소가 관찰되어 닥나무 섬유의 한지를 사용한 것으로 추정된다. XRF 분석을 통해 동궁비 원삼의 통수스란에는 순금의 편금사, 색동과 한삼에는 편은사로 제직한 직금단임을 알 수 있었다. 특히 편은사에서는 황이 높게 검출되는데 이것은 은을 사용하여 금빛을 내기 위한 훈증의 유황 성분의 영향과 보존환경에 의한 황화은이 형성된 것으로 보인다. 또한 용보의 문양은 연금사와 연은사로 표현하였으며, 용보의 테두리는 순금의 연금사로 장식하였다. 특히 본 연구에서는 금사의 금속면과 배지 사이의 접착제와 혼합물에 대해 GC/MS, XRF, Raman 분석을 실시하였다. 그 결과 단백질계 화합물인 아교와 같은 접착제를 사용하고, 혼합물로는 편금사의 경우 활석을 섞고, 편은사에는 석간주를 혼합하여 사용하였음을 확인할 수 있었다.

• 보존과학회지
• /
• 제26권1호
• /
• pp.13-24
• /
• 2010

부여 능산리사지 출토 누금세공 유물 4점을 대상으로 기초적인 재질특성과 미세조직을 분석하여 각각에 대한 제작방법을 살펴보았다. 이 결과 모두 22.7K 이상의 비교적 높은 순도를 나타냈으며 일부 유물에서는 금과 은이 일정 비율로 합금된 상태를 보였다. 표면을 장식한 금선은 0.2~0.8mm 두께를 보이고 다양한 단면형태를 나타냈다. 금입자는 2개 또는 3개가 접합되어 부착된 상태로, 0.3~0.8mm의 직경을 나타냈다. 금세선과 금입자의 표면 접합부에서는 땜의 잔재가 관찰되었으며 성분분석을 통해 금 땜의 사용 가능성을 확인하였다. 또한 진사(HgS), 먹과 같은 안료를 감장하여 표면을 장식한 모습도 보였다.

• 보존과학회지
• /
• 제32권1호
• /
• pp.43-49
• /
• 2016

금사는 금속물로 제작된 실을 의미하며, 다양한 재료와 재질이 혼합하여 사용되고, 제작 방식에 따라 다양한 형태가 구분된다. 같은 형태일지라도 지역에 따라 사용재료가 다르게 나타나기 때문에 금박, 접착제, 배지 등에 대한 기초 자료 조사는 제작기법 및 유물의 제작국가에 대한 정보를 확인할 수 있기에 중요하다. 이에 본 연구는 직금 유물에 사용된 전통 편금사의 접착특성 및 제작기법 분석을 위한 연구를 진행하였다. 지역 및 시대가 다른 직금 유물을 선정하여 시료를 일부 채취하였다. 전통 금사에 사용했을 것으로 추정되는 접착제를 선정하여, 종류별로 표준시료를 제작하였다. 접착제는 아교, 주토 혼합 아교, 옻, 주칠을 선정하였으며, 식물성 배지인 한지 위에 접착제를 바른 후 순금박을 올렸다. 직금유물에서 채취한 금사와 제작한 표준시료를 일부 채취하여 형태 및 무기원소 성분 분석을 하였다. 연구 결과, 편금사는 금박층, 접착층, 배지층으로 구분이 되는 것을 확인할 수 있었다. 표준시료와 비교 관찰한 결과, 아교 및 주칠혼합시료와 형태적으로 유사하였다. 붉은색 접착층에 대한 정성분석 결과 알루미늄(Al), 규소(Si), 철(Fe) 성분이 현미경에서 관찰된 붉은색과 일치함에 따라 전통 편금사는 아교에 주토를 혼합하여 접착제로 사용한 것으로 판단된다. 이러한 사실은 국내 문헌 및 국외사례를 통해서도 확인할 수 있으며, 아교에 주토를 혼합함으로써 발색 및 평활도에서 효과를 얻고자 함으로 사료된다. 또한 이러한 방법은 옻을 접착제로 사용하는 일본과는 달리 중국, 한국에서 공통적으로 관찰되는 제작방법이라는 사실도 확인할 수 있었다.본 연구를 통해 향후 전통 금사의 재현 및 생산기술에 대한 기초 자료로 활용될 것으로 기대된다.

• 복식
• /
• 제56권4호
• /
• pp.82-95
• /
• 2006

The purpose of this study is to figure out the types and characteristics of golden decoration technique out of various techniques of expressing patterns on the costumes. This study reviews both costumes decorated with gold in the relics of Chosun dynasty and literatures focused on domestic and Chinese documents and records. The types of decoration technique using gold include JigGeum (brocade technique), InGeum (gold powder and flake attaching technique), and GeumSaJaSu (embroidery technique). The JigGeum is weaved using golden thread instead of silk thread in order to express patterns. The InGeum technique is to attach gold or silver powder or thin gold or silver flake on the surface of the fabric. The GeumSaJaSu technique is to embroider with gold thread on fabrics. 82 pieces of costumes made using gold in Chosun dynasty era are analyzed. The results follows; In terms of types of technique, is shown to take the majority; JigGeum (43.90%), InGeum (30.49%), GeumSaJaSu (23.61%). Looking at the patterns used by the types, plant pattern and letter pattern are mostly used for both the JigGeum and the inGeum. In terms of the characteristics by their uses, the InGeum is used for court dresses (52%). It is also used for ordinary dresses (12%) and for other purposes (36%). It is mostly used in the court dresses in the late period of Chosun dynasty era. The JigGeum is used for ordinary dresses (47.22%), for court dresses (44.44%) and for other purposes (8.34%). It is evenly used for court dresses and ordinary dresses.

• 복식
• /
• 제58권9호
• /
• pp.129-141
• /
• 2008

Jikgeum(woven with supplementary golden wefts) hyungbae(rank badge) of danryung(official uniform) excavated from Im Backryung'tomb($1498{\sim}1546$) of the Joseon dynasty($1392{\sim}1910$) at Goyang, Gyunggi-Do in 2007, was in a critical condition because of serious collapse of substrate in metal thread. For conservation of hyungbae, metal thread was examined by different scientific methods(Light Microscope, Scanning Electron Microscope and Energy Dispersive X-Rray Spectrometry(SEM-EDS), Fourier Transform Infrared Spectroscopy(FT-IR)). Analytical data showed that metal thread was gilt membrane strip composed of gold leaves and proteinaceous substrate which was probably parchment. To protect collapse of substrate, 1% solution of Paraloid B-72 was infilterated into substrate for consolidation of substrate and it was adhered to warp of fabric in hyungbae, before wet cleaning. After wet cleaning, the most of the gold leaves were restored, which was confirmed by both the examination with the naked eye and the microscopic examination.

• 한국의류학회지
• /
• 제33권8호
• /
• pp.1315-1324
• /
• 2009

This study is on the consolidation process of the conservation process of fabric with golden thread found in relics. Gold film was glued to pieces of Korean paper and satin using hide glue, which is a natural adhesive and resin Paraloid B-72, which is a liquid type adhesive. This study examines the types and concentration of the adhesives that are appropriate for consolidating gold film on fabric. The advantage of hide glue is that it is harmless to humans and has a high stability. This glue is also believed to be the closest to the adhesive that was used when the relic was originally made. Its weakness is that it is stiff and weaker than chemical glues, but after being washed with water the adhesion level increases. Therefore, hide glue is appropriate in the following instances: a) when washing after consolidation b) when the substrate of gold threads are significantly damaged, and c) when treating greater sized relics that take a longer time to work on. However, Paraloid B-72 has a better adhesion and flexibility than hide glue, but tends to spread out into a greater area, and the area where it is applied tends to absorb less water than before the application. In addition, it is noxious and can be harmful in long-term exposure. Therefore, Paraloid-72 is appropriate in the following instances: a) when consolidating the fabric after washing, and b) when working on smaller relics and consolidating smaller parts of a relic. The necessary concentration levels for consolidants for gold film are 30% for liquid type hide glue and at least 10% for Paraloid B-72 in order for the gold film to stay intact on the fabric during washing, consolidation, exhibition, and conservation.

• 대한치과보철학회지
• /
• 제41권4호
• /
• pp.503-518
• /
• 2003

Statement of problem : There have been previous studies about considerable variations in machining accuracy and consistency in the implant-abutment-screw interfaces. Purpose : The purpose of this study was to evaluate the machining accuracy and consistency of implant/abutment/screw combinations on two randomly selected implants from each of four manufactures. Material and methods : In this study, screws were respectively used to secure a cemented abutment, to a hexlock implant fixture ; teflon coated titanium alloy screw(Torq-Tite) and titanium alloy screw in Steri--Oss system, gold-plated gold-palladium alloy screw(Gold-Tite) and titanium alloy screw in 3i system gild screw ana titanium screw in AVANA Dental Implant system, and titanium screws in Paragon System. The implants were perpendicularly mounted in polymethyl methacrylate autopolymerizing acrylic resin block(Orthodontic resin, Densply International Inc. USA) by use of dental surveyer. Each abutment screw was secured to the implant with recommended torque value using a digital torque controller. Each screw was again tightened after 10 minutes. All samples were cross sectioned with grinder-polisher unit(Omnilap 2000 SBT Inc) after embeded in liquid unsaturated polyester (Epovia, Cray Valley Inc) Results : There were the largest gaps in the neck areas of screws in hexagonal extension implants which were examined in this study. The leading edge of the abutment screw thread (superior surface) was in contact with the implant body thread, and the majority of the contacting surfaces were localized to the middle portion of the mating threads. Considerable variation in the contacting surfaces was noted in the samples evaluated. Amounts of contact in the abutment screw thread were larger for assemblies with Gold-Tite screw, gold alloy screw. Torq-Tite screw than those with titanium screws. The findings of intimate contact between the screw and screw seat were seen in all samples, regardless of manufacturers. However, microgap between the head and lateral neck surface of the screw and the abutment could be dectected in all samples. The findings of intimate contact between the platform of the implant and the bottom of the abutment were consistent in all samples, regardless of manufacturers. However, microgaps between the lateral surface of external hex of the fixture and the abutment could be dectected in all samples. Conclusion : Considerable variations in machining accuracy and consistency were noted in the samples and the implant-abutment-screw interfaces were incomplete. From the results of this study, further development of the system will be required, including improvements in pattern design.

• 복식
• /
• 제67권2호
• /
• pp.88-100
• /
• 2017

This study is for the textiles of at Sun Am Temple and characteristic of embroidery. Tak Ui was composed of orange body and green upper cover, and had no strings. The body plate was covered with embroidery, with Gauze base, and upper part was appliqued, by cutting dragon pattern, cloud pattern on satin damask. The thread for embroidery was silk floss, silk twisted thread, rapped gold thread, and rapped silk thread. For padding, it was used cotton thread in the part of dragon's scales. It was used satin stitch, outline stitch, split stitch, couching, and counted stitch, etc. as method of embroidery. In particular, it embroidered counted stitch of diamond shape consecutively on the whole of Tak Ui, it does so with counted stitch of same effect of weaving Brocade in the part of cloud. Besides, it is one of the characteristic for couching rapped silk thread. Such lead embroidery is the popular method in the Ming dynasty of China, in the 16~17 century. The design of Tak Ui is dragon, cloud, and wave in the theme. In the center, 'Seong-su-man-nyeon' was placed on the heads of dragon. This is similar to Dragon Robe of Four-petalled medallion patterns, period of Ming dynasty in China. Therefore, it confirmed that Tak Ui was remodeled the embroidered textiles, made for royal robe, originally, with Tak Ui at temple.

• 한국의류학회지
• /
• 제47권6호
• /
• pp.1177-1192
• /
• 2023

This study aims to expand the scope of use for relics by applying the patterns and characteristics of embroidered fabric pieces, such as gold foil, excavated from the Mireuksa Temple Site in Iksan for fashion products. The artifact was a ra decorated with flower and vine patterns, embroidery using gold and red thread, and the unique stitching of Baekje. The pattern was reconstructed, as the embroidery was not well-preserved. This study used two types of gold-foil techniques: laser-cut and stone-stamp gold foil. Considering practicality, the gloss, toughness, custom production possibility, and design implementation were emphasized. The form of the laser-cut gold foil could be transformed; however, a recognition problem with the machine increased the thickness of the stitching. It was used for half-finished goods and commercial casual fashion. The stone-stamp gold foil was finely implemented, but the design was difficult to change. It was used for half-finished silk fabric for making hanbok po and lattice-patterned silk skirts. Applying the developed gold foil to suitable clothing can further enhance the effect.