• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.4
• /
• pp.141-158
• /
• 2016

The objective of this study is to examine the type and characteristics of hat, and also to analyze the formative characteristics of hats shown in $Pr{\hat{e}}t-{\grave{a}}$-porter Collection. The literature review focused on the relevant technical books and preceding researches while the case study targeted 1,561 photos of hats shown in the 'Donga TV Collection'. The research range was from the S/S season of 2012 to the F/W season of 2015/16. The results of this study are as follows. 1. A hat is composed of crown and brim. In the results of classifying hats based on it, there were 572 crown-type hats, 533 hat-type, 219 cap-type, 156 irregular-type, and 81 brim-type in the order. 2. For the crown-type hats, they were mainly like cylindrical-type, bell-type, dome-type, and circle-type, using colors like black, beige, brown, red, mustard, and grey, and materials like wool, fur, velvet, straw, and metal while they were decorated with bead or lace. 3. For the hat-type hats, they were mainly like bell-type, ladder-type, and hemisphere-type, using colors like peach, white, gold, brown, and khaki, and materials like silk, cotton, straw, and wool while they were decorated with feather and ribbon. 4. For the cap-type hats, they were mainly like hemisphere-type, using colors like white, black, khaki, mustard, and purple, and materials like fur, leather, and wool while they were decorated with wappen and chain. 5. For the irregular-type hats, they were mainly like sandglass-type, box-type, animal-type, trumpet-type, and bell-type, using colors like purple, orange, pink, yellow, and sky-blue, and materials like metal, feather, mesh, plastic, straw, and linen while they were decorated with ribbon, net, bell, and flower. 6. For the brim-type visor, they were mainly like square-type, using colors like transparent, yellow, and black, and materials like plastic, cotton, leather, and metal.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.4
• /
• pp.499-504
• /
• 2000

Amelogenesis imperfecta is defined as a genetically determined effect affecting enamel formation and may be associated with other ectodermal or systemic disorders. It is entirely an ectodermal disturbance, since the mesodermal components of the teeth are basically normal. The presentation of diverse clinical manifestations in 1:14,000 to 1:16,000. Classification of the AI types considers mode of inheritance and clinical manifestations. The most widely accepted classification system recognize three major groups; i.e., hypoplastic(thin enamel), hypocalcified(primary mineralization defect), hypomaturation(defect in enamel maturation). The treatment is that at first, genetic counselling must be practiced, and in anterior teeth, composite resin veneer or jacket crown for esthetics, and in posterior teeth, stainlees steel crown or gold onlay.

• Journal of the Korean Society of Costume
• /
• v.50 no.7
• /
• pp.15-31
• /
• 2000

1. After the Chu Dynasty(周代), we can confirm the fish shape mark made of stones as the relics of the Chunkuk dynasty(戰國時代). In the Shu Dynasty(隋代), the system of bamboo and the rabbit shape mark made of silver into the fish shape mark. As it were, made of bamboo or siltier changed into the fish shape mark made of jade, gold, silver or wood. 2. In the Dang Dynasty(唐代), the used the fish shape credit mark made of jade, gold, silver, copper or textile, according to their classes. According to one's posit the man who wore purple, red coat, credit mark made a gold and silver. attached with putting them in fish bags. 3. In the Ryo Dynasty(遼代), there was also a system of attaching marks. The emperor was hanging the fish shape and the officials attached the double fish shape to the common dress. fish shape of jade. gold, amber, agate, silver or copper. without any fish bag. 4. The Song Dynasty(宋代) followed the system of the Dang Dynasty they used only the fish shape bags without marks in them. Hanging the fish shape bags made of gold and silver at the back side of the belt. 5. The Gin Dynasty(金代) carried out the system of made jade, gold or silver like the Dang, Song and Ryo Dynasty. In the Sejong Kingdom a system of paper card was carried out as the credit mark of the eighth and the ninth grade. 6. In the Ming Dynasty(明代), the military official general attached the golden, silver, ivory of jade, wood and copper cards with their positions and names. 7. Following the Dang Dynasty, Japan made of fish shape bags to their clothes. Colors of their fish shape marks were same as their clothes. They made the marks, such as crystal, cow's horn, lead and nickel and plated them with gold or silver. 8. In Korea, Pohai(발해) established the fish shape credit mark differed in material. gold, silver or copper according to their positions. We can confirm the Unified Silla(南國;統一新羅), carried out the system of attaching the fish shape in Chonma Chong(천마총), Golden Crown Chong(金冠塚), the King's 13-17 belt ring unearthed at the north part of Court South threat Chong(황남대총), the fish shape golden or silver, to their purple or red ceremonial coats. In the Koryo Dynasty(高麗), like the Dang, Song and Pohai, they attached the fish shape golden or silver marks, to their purple or red ceremonial coats.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.1 s.41
• /
• pp.111-122
• /
• 1992

Studying the dress style of the Buddhist Goddess of Mercy SU WOL KWAN EUM DO (Drawings on the Buddhist Goddess of Mercy who is watching the Moon reflected in the still water), it is composed of a splendid, jewel crown with five colors, a light and flimsy, non-colored veil with many kinds of gold·plated patterns. This gold·plated carapace figures on a scarlet ground are drawn on the veil and the oval-type flower figures mixed with a scarlet lotus blossom ard arranged. An arabesque pattern of BOSANGHWA (an imaginary, Buddhistic flower figure) is mainly used for both line decorations and necklace. Like this, various kinds and types of figures are in harmony in spite of many changes in figure design. The SU WOL KWAN EUM DO in Koryo dynasty is full of colorful, subtle, harmonious figures which are unique style, which cannot be found in japan, China, and so on. In other words, most of most of dress patterns which are shown in SU WOL KWAN EUM DO are China ink paintings with mountains and waters as its setting. In case of color painting, figure designs are seldom used. The dress pattern in SU WOL KWAN EUM DO of koryo dynasty is characteristic of its variety and magnificent colors.

• The Journal of Korean Academy of Prosthodontics
• /
• v.19 no.1
• /
• pp.47-54
• /
• 1981

Dental porcelains are widely used for restorative material because of its excellent esthetic property. But according to contact with natural teeth or metal in oral cavity, the porcelain may be worn and may effect on masticatory physiology and prosthetic function. The purpose of this experiment was to study on wear of porcelain surface which treated in different method. Using the abrasion device which was designed and constructed by myself, the different porcelain surface were abraded by gold alloy, nickel-chrome alloy and natural teeth in order to compare roughness. Results were as follows. 1. The group of porcelain abraded by gold alloy showed less surface roughness change (t=2.92, p<0.05), and the group of porcelain abraded by natural teeth had high surface roughness. change (t=6.84, p<0.05). 2. According to the method of surface treatment, the surface roughness were very significant (F=9.12, p<0.05). 3. After abrading, the porcelain surface roughness change was very significant (F=54.49, p<0.05). 4. There was no significant between surface treatment method and the kind of abrading materials. (F=1.01, p>0..05). 5. The group of natural glazing had the most smooth surface ($2.1{\pm}1.13{\mu}m$).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.4
• /
• pp.220-227
• /
• 2019

Purpose: The purpose of this study was to compare the degree of tooth preparation abilities of students according to three self-assessment methods. Materials and Methods: forty-eight sophomores in Kyungpook National University College of Dentistry were divided into three experimental groups. Students performed tooth preparation of the left mandibular first molar for full gold crown. They performed self-assessment using the three methods (visual, digital, and putty index self-assessment group), and reperformed tooth preparation. An intraoral scanner was used to scan each tooth model (prepared tooth and unprepared tooth), and data were acquired in standard tessellation language (STL) file format. The STL files of prepared tooth and unprepared tooth were superimposed using the 3-dimensional analysis software (Geomagic control X). And the reduction amount was measured. In the statistical analysis, all values of reduction amount were analyzed with the Wilcoxon signed rank test and Kruskal-Wallis test (α = 0.05). Results: The three self-assessment methods showed statistically significant differences (P < 0.001). The putty index self-assessment group showed the highest reduction in error than the digital self-assessment method. Conclusion: Within limitations of this study, students showed significant differences in improvement of tooth preparation ability according to the three self-evaluation methods.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.6
• /
• pp.599-610
• /
• 2001

Due to an increasing interest in esthetics and concerns about toxic and allergic reactions to certain alloys, patients and dentists have been looking for metal-free tooth-colored restorations. Recent improvement in technology of new all-ceramic materials and composite materials has broadened the options for esthetic single crown restorations. The aim of this investigation was to study the fracture strength of the metal-free posterior single crowns fabricated using two recently introduced systems, Empress 2 ceramic and Targis-Vectris. Forty premolar-shaped stainless steel dies with the 1mm-wide circumferential shoulder were prepared. Ten cylindrical crowns having a diameter of 8.0mm and total height of 7.5mm were fabricated for each crown system respectively(PFM, Empress staining technique, Empress 2 layering technique, and Targis- Vectris). The crowns were filled with cement and placed on the stainless steel dies with firm finger pressure. The crowns were then stored in distilled water at room temperature for 24 hours before testing. The crowns were tested for fracture strength in an Instron universal testing machine (Instron 6022). With a crosshead speed of 1mm/min the center of the occlusal surface of the crown was loaded using a 4-mm-diameter stainless steel ball until fracture occurred. The fracture surfaces of the crowns were gold coated and examined using scanning electron microscopy(Jeol JSM-840 Joel Ltd., Akishima, Tokyo, Japan). Within the parameters of this study the following conclusions were drawn: 1. The mean fracture strength for PFM crowns was 5829(${\pm}906$)N; for Empress staining technique the fracture strength was 1697(${\pm}604$)N; for Empress 2 Layering technique the fracture strength was 1781N(${\pm}400$)N, and the fracture strength for Targis- Vectris was 3093(${\pm}475$)N. 2. The fracture strength of the PFM crowns was significantly higher than that of the Empress 2 and the Targis-Vectris crowns (P<0.05). 3. The fracture strength of the Targis-Vectris crowns was significantly higher than that of the Empress 2 crowns (P<0.05). 4. No statistical difference was found when Empress staining technique was compared with Empress 2 layering technique. 5. The SEM image of fracture surface of Empress 2 crown showed a very dense microstructure of the lithium disilicate crystals and the SEM image of fracture surface of Targis-Vectris crown showed indentations of Vectris and some fibers tom off from Vectris.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.4
• /
• pp.674-696
• /
• 1997

There're many cases that should be reconstructed with post and core when clinical crown is destructed. But this post and core restoration may cause damaging stress on the teeth. Previous finite element study was restricted to normal bone model relatively close to cemen-toenamel junction. Moreover, the test of a model with diminished bone support was rare. The purpose of this study is to test the effects of alveolar bone loss on the magnitude, stress distribution and displacement of post reconstructed teeth. In this study, it was assumed that the coronal portion of upper incisor was severely destructed. After conventional endodontic treatment, it was restored with post and core. The PFM restoration was made on it. This crown was cemented with ZPC. Alveolar bone was classified by 4 types of bone, such as normal, 2 mm, 4 mm, 6 mm bone, according to the bone loss. Meanwhile, the material of post are divided into 2 types of materials, such as gold, co-cr. Force was applied to two directions. One was fuctional maximum bite force (300 N) applied to the spot just lingual to the incisal edge with the angle of 45 degree to the long axis of the tooth, and the other one was horizontal force (300 N) applied to the labial surface. The results analyzed with three dimensional finite element method were as follows : 1. Stress was concentrated on the adjacent dentin of the post apex, one third portion of the post apex and the labial & lingual mid-portion of the root in all case. The stress of middle third of the root was apparently concentrated on the labial aspect. 2. The stress on adjacent dentin of the post apex and one third of the post apex increased as alveolar bone height moved apically. This increase was dramatic beyond 4 mm bone loss model. 3. The stress of the post apex was spreaded to the middle third of the post and greater than gold post in the case of metal post. 4. The displacement of the neck of post was the greatest in one of the post-cement interface and this increased as alveolar bone height moved apically. Besides the displacement of the metal post is slightly lower than one of the gold post.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.4
• /
• pp.324-329
• /
• 2012

Excessive tooth wear causes loss of tooth structure, disharmony of occlusal plane, functional and esthetic problems. Although the decrease of occlusal vertical dimension may be compensated by growth of alveolar bone, if the length of tooth is not enough for the retention of restoration, minimum increase of occlusal vertical dimension is required without discomfort of the patient. In this case, 33-year-old woman drinks more than 1 liter of soft drinks a day and has bruxism in night time, visited in Seoul National University Dental Hospital with chief complaint of generalized tooth wear and related esthetic and functional problems. It was considered as a loss of occlusal vertical dimension based on the accelerated tooth wear caused by erosion and bruxism and facial appearance, phonetic, esthetic, functional evaluations. It was planned to raise occlusal vertical dimension by provisional restoration two times for patient's adaptation, 3 mm and 2 mm each, total 5 mm. Confirming no discomfort and clinical symptom during total 16 weeks after restoration with provisional fixed restoration, it was restored with porcelain fused to gold crown and bridge. Because the patient was young woman, anterior teeth were restored with collarless porcelain fused to gold crown. This case presents that satisfactory esthetic and functional result by full mouth rehabilitation with increase of occlusal vertical dimension.

• Journal of Oral Medicine and Pain
• /
• v.20 no.2
• /
• pp.317-325
• /
• 1995

This study was performed to investigate the mean life expectancy of dental prosthetic restorations. The author has examined 352 dental prosthesis clinically and radiologically, and decided the success(survival) and failure(mortality) of the dental prosthesis. The dental prosthesis which had been treated in the Seoul National University Dental Hospital, two private clinics in Seoul, one university dental hospital, and two private clinics in local province were included in this study. The survival analysis using product limit estimator was used and the mean life expectancy of each type of dental prosthesis was calculated. The results were as follows : 1. The life expectancies were 10.5 years in gold crown and bridge, 8.5 years in porcelain fused to metal crown and bridge, 8.3 years in nonprecious metal crown and bridge, 8.1 years in removal partial denture, and 7.7 years in full denture. 2. The causes of mortality were in the order of dental caries(24.6%), fracture of dental prosthesis(19.2%), periodontal problems(18.6%), chronic chewing difficulty and dysfunction due to dental prosthesis(15.0%), excessive exposure of abutments due to the marginal defect of dental prosthesis(14.4%), abnormal occlusion due to severe attrition of artificial teeth in dentures(3.0%), periapical problems(2.4%), perforation of dental prosthesis(1.8%), and loose contacts with neighboring tooth(1.2%). 3. Among survival cases, 66.5% showed normal chewing ability and 31.9% showed partial chewing ability. However, 1.6% of them complained loss of chewing ability. 4. Among failure cases, 6.6% showed normal chewing ability and 38.9% showed partial chewing ability. However, 54.5% of them complained loss of chewing ability.