• Journal of Trauma and Injury
• /
• v.26 no.3
• /
• pp.151-156
• /
• 2013

Purpose: Traumatic cervical SCI is frequently accompanied by dural tear and the resulting cerebrospinal fluid (CSF) leak after surgery can be troublesome and delay rehabilitation with increasing morbidity. This study evaluated the incidence of intraoperative CSF leaks in patients with traumatic cervical spinal cord injury (SCI) who underwent anterior cervical surgery and described the reliable management of CSF leaks during the perioperative period. Methods: A retrospective study of medical records and radiological images was done on patients with CSF leaks after cervical spine trauma. Results: Seven patients(13.2%) were identified with CSF leaks during the intraoperative period. All patients were severely injured and showed structural abnormalities on the initial magnetic resonance image (MRI) of the cervical spine. Intraoperatively, no primary repair of dural tear was attempted because of a wide, rough defect size. Therefore, fibrin glue was applied to the operated site in all cases. Although a wound drainage was inserted, it was stopped within the first 24 hours after the operation. No lumbar drainage was performed. Postoperatively, the patients should kept their heads in an elevated position and early ambulation and rehabilitation were encouraged. None of the patients developed complications related to CSF leaks during admission. Conclusion: The incidence of CSF leaks after surgery for cervical spinal trauma is relatively higher than that of cervical spinal stenosis. Therefore, one should expect the possibility of a dural tear and have a simple and effective management protocol for CSF leaks in trauma cases established.

• Journal of Chest Surgery
• /
• v.26 no.11
• /
• pp.851-855
• /
• 1993

Among elevn consecutive cases having undergone Completion Pueumonectomy[CP]between 1958 and Aug. 1993 at the Dep. of Thoracic & Cardiovascular Surgery in National Medical Center. The patient`s mean age was 43 years[range 28 yrs, to 68yrs.],& they consisted with 10 males and 1 female. The indications for CP were benign diseases in 9 cases & 2 cases of lung cancer. The mean interval between the first operation & CP was 62.3 months[from 17 days to 288 months]. The several special intraoperative procedures such as intrapericardial pulmonary vesselsdivision & suture ligation, reinforcement of bronchial stumpmargin, & applied the Fibrin glue & hemostatics. The mean intra operative bleeding was 3582ml.[1500ml. to 6500ml.] The post orerative complication were developed in 5 cases[45.5%] they were empyema with BPF in 2 cases, empyema in 2 cases, & 1 case of repiratoy insufficiency which leading to death. We concluded that the C P noted high morbidity & mortality compared with ordinary first pulmonary resectional surgery. But, it will be a challenge to improved the morbidity because of increasing trend of completion pneumonectomy in a furture time.

• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.321-327
• /
• 2000

Tungsten(W) thin films with good adhesion property and low resistivity (~10 $\mu$\Omega$$.cm) were deposited directly on $SiO_2$ by LPCVD. The adhesion property of W thin films on $SiO_2$ improves as the temperature and/or $SiH_4/WF_6$ gas ratio increase. Specifically tungsten thin films could be deposited on $SiO_2$ even at $350^{\circ}C$ if the gas ratio of 2 was employed. The resistivity of tungsten thin films deposited at $350^{\circ}C$ was high due to the presence of $\beta$-W. However, the resistivity can be minimized by increasing the amount of $H_2$ gas flow. Therefore, it is shown in this work that the adhesion of tungsten thin films on $SiO_2$ can be improved simply by controlling the process parameters (e.g., temperature, gas ratio and $H_2$ flow rate) without employing complex deposition methods or additional glue layers.

• Journal of the Korean Wood Science and Technology
• /
• v.12 no.2
• /
• pp.35-43
• /
• 1984

This study was carried out to investigate the block shear strength of the 2ply laminated wood composed of Pinus thunbergii with ureaformaldehyde resin as adhesives according to pressure (6, 9, 12, 15kg/$cm^2$), pressing time(5, 10, 20, 30 hrs.), amount of spread(54, 108, 217, 324g/$cm^2$), hardener(10, 20, 30, 40% of 10% $NH_4CL$ on resin) and extender(0, 5, 10, 15% wheat flour on resin), and the bending strength and bending young's modulus of laminated beam according to the number of ply. The results were summarized as follows; 1. According to pressing pressure with amount of spread 217g/$cm^2$ both dry and wet shear strength of laminated wood showed the highest in 15kg/$cm^2$, and hot-cold soaking treatment showed the highest in 9kg/$cm^2$, while all shear strength of dry, wet and hot-cold soaked laminated wood have been reduced with the increasing of pressing time. 2. According to amount of spread, adhesion strength with the dry, wet and hot-cold soaking treatments revealed the highest in 217g/$cm^2$ and have been reduced under or over 217g/$cm^2$ of spread. 3. According to addition of hardener and extender, all shear strength of laminated block with the dry, wet and hot-cold soaking treatments have been reduced in increasing of addition amount of hardener and extender. The bending strength of beam according to the number of ply showed the highest in 2ply laminated wood and horizontal loading beam to glue line had the higher in strength than the vertical loading.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.1
• /
• pp.72-78
• /
• 1999

To accelerate the curing and to improve the bonding properties of urea-melamine-formaldehyde (UMF) resin adhesives for plywood, the effects of resin compositions and additives on gelation time and bonding strength were discussed. The gelation time of UMF resin prepared by simultaneous reaction with urea(U), melamine(M) and formaldehyde(F) at M/U molar ratio 0.2 was shortened as the molar ratio of formaldehyde to urea was increased. However, at F/U molar ratios higher than 2.5, the amounts of free fomaldehyde of resin could not satisfy with KS standard, Therefore, it was difficult to increase the amount of formaldehyde in resin composition for the purpose of fast gelation time. With increasing the molar ratio of melamine to urea(M/U) from 0.3 to 0.6 at constant F/U molar ratio 3.4, the gelation time of UMF resin was slightly decreased, while gradually increased at M/U molar ratio higher than 0.6. The gelation properties of UMF resin and bonding strength of UMF-bonded plywood could be enhanced by using ammonium chloride and p-toluene sulfonic acid as a curing-agent together with wheat flour and corngluten powder as a extender.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.4
• /
• pp.607-615
• /
• 2016

The delamination along the annual ring on the cross-section of laminae and the bonding strength according to the tangential angle between laminae were evaluated for the production of 3-ply cross-laminated timber (CLT) using domestic larch. Since there is no standard for CLT in Korea, the production and test of specimens for bonding strength followed the standard procedure of "Structural glued laminated timber" (KS F 3021). The standard specifies to exclude any measurement from the cracks of timbers resulted from drying or knots during delamination test of the glued laminated timbers. However, the failure of cross-sectional tissues along the annual rings was observed near the glue-line of all specimens during the delamination test. Because this phenomenon can generate defects in the CLT that may be exposed to various temperatures and relative humidities after the actual construction, the delamination percentage was measured by including this wood failure. As a result, the delamination percentage of the CLT which had been combined in such a way that the annual rings of outer lamina were directed inward was the lowest, which was around 13%, regardless of the annual ring direction of the middle lamina. On the other hand, the delamination percentage of the CLT which had been combined in such a way that the annual rings of outer lamina were directed outward was the highest, which was around 26%. Furthermore, end-split occurred in the outer lamina during the drying process of the boiling delamination test, which affected the delamination percentage. Therefore, the soaking delamination test was found to be more appropriate for evaluating the delamination strength of CLT. The block shear strength of larch CLT was $3.9{\pm}0.9$ MPa on average, which was 46% lower than the block shear strength requirement (7.1 MPa) of the standard, but satisfied the criteria of the block shear strength (3.5 MPa) of the European Standard (prEN 16351: 2013).

• Applied Biological Chemistry
• /
• v.47 no.3
• /
• pp.332-338
• /
• 2004

An investigation in search of the best oxidizing agent for smoke generators using rice chaff as a combustible carrier was carried out. Smoke rods formulated with active ingredients (AIs) such as inorganic oxidizing agents, glue, and powdered rice chaff, showed constant and high burning rate and high smoking rate on 11 kinds of pesticides. Sodium chlorate was the most suitable oxidizing agent for smoke rod. Even though the sodium chlorate content of the formulation showing the highest smoking rate of AI was variable to pesticides, the smoking rate appeared to increase as the burning rate increased. Active ingredients in smoke generator using rice chaff as a combustible carrier were stable for 60 days when stored at $50^{\circ}C$. An apparatus designed for smoke trapping was useful to collect smoked active ingredients.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.58-65
• /
• 2008

Most connections for the glulam structural members consisted of connector and fastener. The mechanical behaviour of the connection can be occurred by the dowel bearing resistance and wood shear by the fastener. This study aims at the examination of the shear properties for the small specimen with lamination components and for the full-sized pin connection and the moment resisting property for the double shear full-sized pin connection using structural column and beam members. Small specimens including glue line shows greater density and shear strength by the lamination effect than other specimens. It is needed that estimations of double shear property and moment resistance for the pin connections should be adjusted in some degree. For the better and safe estimation of moment resistance strength for the column-beam pin connection, however, the shear strength of small specimens should be deducted by 10%.

• Korean Journal of Materials Research
• /
• v.16 no.4
• /
• pp.257-263
• /
• 2006

We have investigated the effect of silver added to Cu films on the microstructure evolution, resistivity, surface morphology, stress relaxation temperature, and adhesion properties of Cu(Ag) alloy thin films deposited on Mo glue layer upon annealing. In addition, pure Cu films deposited on Mo has been annealed and compared. The results show that the silver in Cu(Ag) thin films control the grain growth through the coarsening of its precipitates upon annealing at $300^{\circ}C{\sim}600^{\circ}C$ and the grain growth of Cu reveals the activation energy of 0.22 eV, approximately one third of activation energy for diffusion of Ag dopant along the grain boundaries in Cu matrix (0.75 eV). This indicates that the grain growth can be controlled by Ag diffusion along the grain boundaries. In addition, the grain growth can be a major contributor to the decreased resistivity of Cu(Ag) alloy thin films at the temperature of $300^{\circ}C{\sim}500^{\circ}C$, and decreases the resistivity of Cu(Ag) thin films to $1.96{\mu}{\Omega}-cm$ after annealing at $600^{\circ}C$. Furthermore, the addition of Ag increases the stress relaxation temperature of Cu(Ag) thin films, and thus leading to the enhanced resistance to the void formation, which starts at $300^{\circ}C$ in the pure Cu thin films. Moreover, Cu(Ag) thin films shows the increased adhesion properties, possibly resulting from the Ag segregating to the interface. Consequently, the Cu(Ag) thin films can be used as a metallization of advanced TFT-LCDs.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.2
• /
• pp.167-180
• /
• 2011

The portraits created in the age of Queen Elizabeth I show a very exquisite description about the ruff collar and cuffs representing the notable evolution of periodical costumes from a detailed viewpoint. This thesis analyzes the ruff collar and cuffs of the portraits of Queen Elizabeth I. The method used selects 32 pieces from the portraits of Queen Elizabeth I that are considered excellent depictions of a ruff collar and cuffs, to investigate size, form and decorations. Conclusively, the ruff collar tends to be extremely enlarged and thickened (coinciding with the development of glue) while the cuffs denote the aspect of double cuffs coupled with the turn-back cuffs without a change in size. These traits were widely shown from 1585 to 1587, while after 1588 the ruff cuffs completely disappeared in the portraits of Elizabeth I. At the same time, the change of a ruff collar was remarkable, the collar being in the erect position behind the head (with the use of supporters), of a consistent thickness and decoration of elaborate lace. During the transition period from the $16^{th}$ century to the $17^{th}$ century the earliest change was in cuffs followed by collars. This research is a helpful guide to detect the relatively exact date of portraits not definitively identified in the latter part of the $16^{th}$ century and to observe the microscopic evolution of costumes in the latter part of the $16^{th}$ century.