• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.509-510
• /
• 2000

Piezoelectric ZnO thin films were deposited on slide glass by Facing Targets Sputtering(FTS). The Facing Targets Sputtering system can deposit thin film in plasma-free situation and change the deposition condition in wide range. The characteristics of zinc oxide thin films on power, working pressure, and substrate temperature were investigated by XRD (x-ray diffractometer), alpha-step (Tencor) and SEM (Scanning Electron Microscopy) analyses. In the results, we suggest that FTS system is very suitable to preparing high quality ZnO thin films with good c-axis orientation.

• 한국전기전자재료학회논문지
• /
• 제28권2호
• /
• pp.109-114
• /
• 2015

We realize a color reflective display without any color filter and sub-pixelation concept, by which the full or single color realization is basically impossible. In this study, we use a 3-electrode on the lower substrate with indium tin oxide (ITO) glass. The width of a rib is $30{\mu}m$, a cell size is $150{\mu}m{\times}150{\mu}m$, and the space of lower electrodes is $10{\mu}m$. To get the single color, we drive this panel by a identical algorithm based on the movement of charged particle in color fluid within a cell with hermetic seal. According to the driving method, the lifetime of panel is different.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1379-1381
• /
• 1994

In order to investigate the effects of crystal structure in electrical breakdown of polyethylene film. Low molecular materials in polyethylene are removed by the method as follow. Polyethylene was dissolved in xylene and filtered through a glass fiber filter. And then, a polyethylene thin films of thickness $0.5 - 0.9{\mu}m$ are prepared with heat treatment from solution casting. To evaluate the performance of PE film, Electrical breakdown of PE film are measured on M( Al) - I (PE)-M(Al) system.

• 설비공학논문집
• /
• 제19권11호
• /
• pp.797-802
• /
• 2007

The effects of window cover on the performance of the plate type radiant cooling test system are studied. The cover materials tested are 2mm, 1mm, 0.7mm glass, Cokin 007 filter, and PVC film. The measurements are performed during the September nights of 2005 at the rooftop of the building in Seoul. The equivalent height of the building is about a building with twelve floors. The radiant cooling performance of the black painted and aluminum film coated plate are compared under no cover condition. Also the results are compared when the system has cover over the plate. In general, the covers reduce the radiant cooling temperature differences during the nighttime. Among these covers, the PVC film cover shows the best performance. In some cases, the plate with PVC film cover shows lower temperatures than the system without cover.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권5호
• /
• pp.216-220
• /
• 2001

Piezoelectric ZnO thin films by Facing Targets Sputtering(FTS) method were deposited on slide glass. The Facing Targets Sputtering system can deposit thin film at plasma-free condition and change the deposition condition in wide range. The characteristics of ZnO thin films changed with power, working pressure and substrate temperature were investigated by XRD(x-ray diffractometer), alpha-step(Tencor) and SEM(Scanning Electron Microscopy) analyses. In the results, we suggest that FTS system is very suitable for the preparation of high quality ZnO thin films with good c-axis orientation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.401-402
• /
• 2014

State of Charge (SOC) and State of Health (SOH) are the key issues for the application of Absorbent Glass Mat (AGM) type battery in Idle Start Stop (ISS) system which is popularly integrated in Electric Vehicles (EVs). However, battery parameters strongly depend on SOC, current rate and temperature and significantly change over the battery life cycles. In this research, a novel method for SOC, SOH estimation which combines the Auto Regressive with external input (ARX) method using for online parameters prediction and Dual Extended Kalman Filter (DEKF) algorithm considering hysteresis is proposed. The validity of the proposed algorithm is verified by the simulation and experiments.

• Bulletin of the Korean Chemical Society
• /
• 제20권4호
• /
• pp.431-435
• /
• 1999

An organic precipitate flotation of Cd(Ⅱ) and Pb(Ⅱ) was investigated by the coprecipitation with lanthanum 8-hydroxyquinolinate. Trace amounts of Cd(Ⅱ) and Pb(Ⅱ) with a significantly large amount of La(Ⅲ) were simultaneously precipitated in a 1,000 mL sample solution with the ethanolic 8-hydroxyquinoline solution. The pH was adjusted to 9.0 with 2 M ammonia solution. The precipitates were floated with the aid of tiny nitrogen bubbles and supported by the stable foam layer of sodium lauryl sulfate. The floats were collected on the fritted glass filter by a suction. The material collected was dissolved with 5.0 mL of ethanol and 1.5 mL of concentrated nitric acid, and then diluted to 25.0 mL with a deionized water. The analytes were determined by a flame atomic absorption spectrophotometry. The recoveries of the analytes spiked in the sample were 94.8% for Pb(Ⅱ) and 92.0% for Cd(Ⅱ). This flotation technique is simple and rapid, and also applicable to the determination of trace Cd(Ⅱ) and Pb(Ⅱ) at lew ppb levels.

• 한국토양환경학회지
• /
• 제5권2호
• /
• pp.55-66
• /
• 2000

본 실험에 사용된 토양으로는 U. S EPA Synthetic Soil Matrix를 선택하였고, 오염된 토양을 만들기 위하여 건조 토양의 무게 백분율로 4.79%에 해당하는 양만큼의 Pyrene을 Dichlomethane에 녹여 고체상태인 Pyrene을 토양에 오염시켰다. 오염된 시료(50$\pm$0.1mg)를 전기적으로 열적처리하는 열반응기는 외경이 20cm, 높이가 30cm인 실린더 형태로서 Pyrex재질로 제작하고 윗부분과 아래 부분은 알루미늄 플랜지로 밀폐시켰다. 내부에는 stainless steel판(3.5cm$\times$13cm$\times$0.00254m, 3.5cm$\times$13cm$\times$0.00254cm, 302 stainless steel shim)과 두개의 전극봉으로 구성되었다. 각각의 토양을 열적처리하기 위한 조건은 최고온도가 45$0^{\circ}C$에 가온율이 $1130^{\circ}C$/s인 경우, 최고온도 $760^{\circ}C$에 가온율이 $950^{\circ}C$/s인 경우 그리고 최고온도가 $977^{\circ}C$ 에 가온율이 $977^{\circ}C$ /s인 경우를 선정하였다. 토양을 열처리한 후 알루미늄 foil funnel과 glass filter paper에서 타르를 포집하였으며, 타르와 잔류토양 시료내의 물질은 Dichlorornethane을 이용하여 추출하였고 이를 HPLC로 측정하였다. 실험결과, 최고온도가 $455^{\circ}C$ 인 경우 Tar Filter에 포집된 Tar색은 White이었으며 대부분의 성분이 Pyrene으로 나타났다. 최고온도가 $760^{\circ}C$ 인 경우는 Tar의 색이 Pink brown이었으며, 약간의 그을음덩어리(Cluster)가 전극관과 Tar Filter의 표면에서 발견되었다. $977^{\circ}C$ 의 경우 Tar색은 Dark brown이었다. Tar성분을 추출하여 HPLC로 분석한 결과, 6개의 Bipyrene의 isomer가 발견되었으며 그 중에서 bacterial cell이나 human cell에 돌연변이를 유발할 수 있는 매우 유해한 성분으로 분류되는 Cyclopenta(cd) pyrene(CPEP)는 온도 조건 $455^{\circ}C$ 에서는 검출되지 않지만 $760^{\circ}C$ 및 $977^{\circ}C$ 에서는 검출되는 특징을 보였다. 그밖에 미미한 양이지만 C14H10과 C15H10이 검출되었다.

• 한국산업보건학회지
• /
• 제16권3호
• /
• pp.222-232
• /
• 2006

Objectives: The objective of this study was to propose the total isocyanate analytical method which involves derivation of 2,4-toluene diisocyanate(2,4-TDI), 2,6-toluene diisocyanate(2,6-TDI), 4,4'-methylenediphenyl diisocyanate(4,4'-MDI) and 1,6-hexamethylene diisocyanate(1,6-HDI) using 2-chlorobenzyl alcohol(2-CBA) or 2,4-dichlorobenzyl alcohol(2,4-DCBA), and analyzing of hydrolysate of the synthesized urethane with the gas chromatography(GC)/flame ionization detector(FID), GC/pulsed discharge ionization detector-electron capture detector(PD-ECD) and GC/mass selective detector(MSD). Methods: Urethanes were synthesized by reacting 2,4-TDI, 2,6-TDI, 4,4'-MDI and 1,6-HDI to 2-CBA or 2,4-DCBA. Urethanes was verified by TLC, HPLC/UVD and GC/MSD. For field application, the most suitable condition that 2-CBA coated in glass fiber filter removed completely and urethanes were not removed was searched. 2-CBA generated from hydrolysis of urethanes according to hydrolysis conditions. Diisocyanates were collected on field air and analyzed. Results: Urethanes which were white and solid phase synthesized by reacting 2,4-TDI, 2,6-TDI, 4,4'-MDI, 1,6-HDI and 2-CBA or 2,4-DCBA. And urethanes were verified by TLC, HPLC/UVD and GC/MSD. The most suitable conditions to remove 2-CBA coated in glass fiber filter were $87^{\circ}C$ and 20 mmHg and urethanes were not removed under same condition. Hydrolysis yields of urethanes were 99 % to 111 %. 2-CBA, the hydrolysate of urethanes was analyzed by GC/FID, GC/PD-ECD and GC/MSD. Conclusions: Simultaneous analysis of 2,4-TDI, 2,6-TDI, 4,4'-MDI and 1,6-HDI deriving with 2-CBA and 2,4-DCBA, along with a total isocyanate analysis, was feasible with GC/FID, GC/PD-ECD and GC/MSD. This result will be a guide of further study on total isocyanate analysis.

• 전기화학회지
• /
• 제14권3호
• /
• pp.171-175
• /
• 2011

리튬금속을 사용하는 리튬이차전지는 사용이 간편하고 측정전극의 고유특성을 분석할 수 있는 장점이 있는 반면에 방전후 충전 시 리튬금속 전극에 리튬금속 수지상이 생성되고 심지어는 성장된 수지상에 의해 내부단락을 초래한다. 이러한 단락현상은 분리막의 두께와 밀접한 관계가 있다. 수지상에 의한 내부단락을 방지하기 위하여 두께가 각각 다른 4종류의 분리막을 사용하여 전기화학적 특성을 분석하였다. 다공성 유리섬유 부직포(glass microfiber filter) 분리막은 두께가 $300{\mu}m$ 로써 내부단락을 효과적으로 방지 할 수 있으며 AC 임피던스 값도 낮아서 유망한 분리막으로 확인하였다. 분리막의 두께가 $50{\mu}m$ 이상인 경우 내부단락 현상이 일어나지 않았으며, 0.2 C율의 싸이클 특성도 양호하였다. Signature 율 특성은 다공성 유리섬유 부직포를 사용한 경우 5 C의 고율에서 용량 유지율은 0.1 C에 비교하여 99%의 우수한 특성을 나타내는 것을 확인하였다.