• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.15 no.2
• /
• pp.61-65
• /
• 2009

This study was conducted to investigate the safety status of gasket of glass bottle being used for the Bulgogi sauce. The content of plasticizers in the gasket and their migrated amounts into Bulgogi sauce were determined. Among the plasticizers analyzed, only di-isodecyl phthalate (DIDP) was detected in the range between 30.6 and 35.9% from 6 samples. None of the plasticizers was detected in the sauce. Therefore, it can be concluded that the safety status of the gasket tested met the requirement of limit values as prescribed for the migration test of food packaging utensils, containers and packages of the Korea Food Code.

• Journal of Pharmaceutical Investigation
• /
• v.16 no.1
• /
• pp.8-11
• /
• 1986

There have been many difficulties in utilization of polyethylene (PE) container for volatile ingredients because of its high permeability. We selected glycol-modified polyethylene terephthalate (PETG) lately being used and evaluated the stability of 0.5% chlorobutanol solution for PETG. We used PE bottle, glass flask and rubber stoppered vial for comparison and assayed chlorobutanol contents of the samples stored at various temperatures for nine weeks by HPLC method. The results indicated that the stability of chlorobutanol in PETG container was almost similar to that in glass flask, and was superior to that in PE bottle and rubber stoppered vial.

• The Journal of Engineering Research
• /
• v.6 no.1
• /
• pp.15-27
• /
• 2004

The first aim of mass product of glass in Automatic bottle glass industry is to decrease the cost and to increase the quality. Second, the cullet is how widely used to save the energy and reducing of ecomaterials. However the physical and chemical properties of Soda-lime glass would be come true at the lower than 2% $Al_2 O_3$. Unfortunately the $Al_2 O_3$ contents of domestic silica is greater than 4% Since small glass class than 200ml bottle is made in domestic silica the producting efficiency would be decreased due to the defect such as cord, knot, devitrite, pore etc. There are many problems such as devitrifiacation and deteriorated effect on production in glass industry became of increasing of plate glass cullet. It is tried to solve these kinds of problems using various analysing methods in this experiments.

• Clean Technology
• /
• v.15 no.3
• /
• pp.224-230
• /
• 2009

Life Cycle Assessment (LCA) has been studied on the reuse of glass bottles. The system boundary in this study encompassed from gate to gate such as production and transportation. A 360 mL volume of a glass bottle was selected as the functional unit. The environmental impact assessments was studied on 6 categories including abiotic resource depletion, acidification, eutrophication, global warming, ozone depletion, and photochemical oxidant creation. The results showed that the most significant impact categories were abiotic resource depletion (48.63%) and global warming (46.27%), and the rest categories revealed insignificant impacts. In the whole system, the chemicals used for the new bottle production revealed the major contribution to the environmental impacts (71.24%), followed by the use of electricity (16.74%) and transportation (11.8%). In addition, the environmental impact of sodium silicate to be put into the stage of the new bottle production was found to be 45.68%, causing severe influence on abiotic resource depletion and global warming.

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.519-526
• /
• 2005

Hydrolysis of soda-lime waste glass was investigated to test the feasibility for use of waste glass as feed material in the production of foamed glass. The soda-lime glass, such as plate glass and various bottle glasses, was effectively hydrolyzed by steam and water under high pressure. The proper condition for the hydrolysis was found to be reaction temperature of $250^{\circ}C$ and reaction time of 2 h. Under this condition, the water content of hydrated glass through hydrolysis was 7.85~10.04%, allowing successful foaming process for production of foamed glass. Using Na as the modifying agent of glass was effective in the hydrolysis by water. The highest water content of hydrated glass was obtained when weight ratio of NaOH to the glass was 0.04.

• Advances in concrete construction
• /
• v.17 no.3
• /
• pp.167-177
• /
• 2024

Disposal of waste glass derived from bottle or packaging glass, flat glass, domestic glass is one of the major environmental defies. Moreover, the remnants of bricks resulting from the remnants of buildings are also considered an important factor in polluting the environment due to the difficulty of filling or getting rid it. The aim of this study is to valorize these wastes through chemical activation to be an environmentally friendly material. The Microstructure, compressive strength, setting time, drying shrinkage, water absorption of different pastes produced by clear glass (CG), green glass (GG) and brick waste (BP) activated were tested and recorded after curing for 3, 7, 28 and 365 days. Five samples of pastes were mixed in proportions represented by: 100% GP (GP), 100% GGP (GGP), 100% BP (BP), 90% GP + 10% BP (GPB) and 90% GGP + 10% BP (GGPB). Various parameters considered in this study include sodium hydroxide concentrations (10 mol/l); 0.4 as alkaline liquid to binder ratio; 2.5 as sodium silicate to sodium hydroxide ratio and cured at 60℃ for 24 hours. Experimental results revealed that the addition of 10% of BP resulted in an increased strength performance of geopolymer paste especially with GGPB compared to GGP in 365 days. In addition, the 10% amount of BP increases the absorption and shrinkage rate of geopolymer pastes (GPB and GGPB) by reducing the setting time. SEM results revealed that the addition of BP and GP resulted in a dense structure.

• Resources Recycling
• /
• v.29 no.2
• /
• pp.28-36
• /
• 2020

To enhance the recycling rate of wasted glass bottles toward recycled aggregates, the study would decide optimal comminution equipment based on the particle size distribution, aspect ratio and equipment energy analysis. The impact, compress and abrasion is type of generated force by comminution. So, hammer crusher, shredder, roll crusher and ball mill have been selected because they have characteristic which is each type of force. As a result of the particle size analysis of each product, only the shredder product satisfied concrete and asphalt aggregate quality standard condition. Also, as a result of aspect ratio analysis using Imaging software program (Image J, National institute of health), most of size fraction is confirmed under 1.6 value. It was confirmed that the product has low dangerousness and satisfying to shpage index. Also, the particle reduction ratio against input energy of shredder product was the most high. Therefore, we can decide that the optimal equipment which applicable for comminuting waste glass bottle in certain particle size under 10mm is shredder. The result of study will make contribution to increasing energy efficiency of comminution processing and competitiveness of product.

• The Korean Journal of Mycology
• /
• v.27 no.2 s.89
• /
• pp.87-93
• /
• 1999

This study was conducted to investigate the morphological characteristics and cultural conditions for artificial fruiting body(synnemata) production of Paecilomyces japonica. In the morphological characteristics of P. japonica, the size of it's conidia was ranged from $5.0{\sim}1.5\;to\;7.9{\sim}2.4\;{\mu}m$. The artificial fruiting body showed yellow in color, shape was confirmed ellipsoidal or obovoid type, and the length was $50.6{\sim}104.5\;mm$. The mycelial growth on the PDA medium treated with pH7, at $25^{\circ}C$ was superior to that of other treatments. The formation period of an artificial fruiting body of P. japonica treated with polypropylene and glass bottle culture was 30 days and 50 days, respectively. The length and number of fruiting body was longer and higher in the polypropylene bottle culture than those of the glass bottle culture. As the results, the artificial fruiting body production in the polypropylene bottle increased 1.2g per bottle compared to that of the glass bottle. It also increased in $100{\sim}400\;lx$ illumination, whereas the elongation of synnemata, pinheading and fruiting body growth were inhibited by continuous use of 900 lx illumination. The results of these experiment indicated that fruiting body formation seemed to be lower as the light intensity increased. The fruiting body formation was also dependent on the light color. There was a higher incidence in red color light and fluorescent light treatment than that of incandescent and blue color light. The fruiting body of the naked barley medium had so much better growth compared to other media that it would be able to use for it's production. The growth of fruiting body was affected by $CO_2$ concentration. It increased after putting the lid on the bottle.

• Journal of Korean Elementary Science Education
• /
• v.33 no.4
• /
• pp.736-750
• /
• 2014

The purposes of this study were to investigate concepts of Korean and American elementary school pre-service teachers on combustion, and to compare the concepts of Korean pre-service teachers with those of American pre-service teachers. For this study, concept test on combustion was administered to 23 Korean and 18 American elementary school pre-service teachers. The test composed of 6 items: 'Definition of combustion', 'The reason why a candle in a glass bottle is blown out when the bottle was closed', 'The change of gases in the bottle when a candle burns in it', 'The combustion products of a candle', 'The combustion products of steel wool', and 'The combustion products of a substance'. The results showed that the rates of elementary school pre-service teachers who had scientific concepts on combustion were very low in both Korean and American pre-service teachers' groups, although they were a little different from items. However the rates of pre-service teachers who had partial concepts and misconceptions on combustion were high in two groups. The levels of Korean elementary school pre-service teachers' concepts were a little higher than those of American elementary school pre-service teachers' concepts. The contents and activities on combustion which are in Korean and American science textbooks seem to affect building up their concepts on combustion.

• Journal of Oral Medicine and Pain
• /
• v.1 no.1
• /
• pp.8-13
• /
• 1973

The authors had studied the oral environmental changes by salivary salivary pH, amount, periodontal Index in patient with active pulmonary tuberculosis patients. Among the subjects, The experimental group was consisted of 100 patients (50 males and 50 females) of 20-29 years and 100 persons of control group (50 males and 50 females) of 20-29 years. The measurement of salivary amount was performed with wide mouthed plastic (2 Inches) bottle for avoidance of Ionization of SiO2 by using of glass bottle and salivary pH was checked by pH meter 27 radiometer Copenhagen. The results are as follows : 1. The slivary pH does not appear to be characteristic of tuberculous paticents. 2. The obtained salivary amount indicated no significant to the tuberculous patients as compared to the obtained supposedely wealthg individuals. 3. The Russel Index wasfound higher and there had found more periodontal involvement(3 times than normal) in the experimental group.