• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.12
• /
• pp.2109-2115
• /
• 2001

Miniaturized specimen technology is useful to characterize the mechanical behavior when it is difficult to sample the material enough for the test. In this study, two kinds of miniaturized Charpy impact specimens(i.e., miniaturized specimen with side groove and without side groove) of aged 1Cr- lMo-0.25V steel were prepared and tested. The relationship between the extent of degradation in terms of ductile brittle transition temperature(DBTT) and the fracture stress of 1Cr-1Mo-0.25V steel was established. The fracture stress obtained from miniaturized specimen without side groove turned out to be linearly related with the DBTT of standard specimen. Therefore the fracture toughness of aged turbine rotor steel might be evaluated by the fracture stress. In addition, the correlation between DBTT of standard specimen and that of miniaturized specimen was investigated. As the results of normalizing DBTT by maximum elastic tensile stress, the normalized DBTT of miniaturized specimen without side groove allows one to estimate that of standard specimen.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.303-305
• /
• 2005

현재 인류가 직면하고 있는 에너지 및 환경 문제를 해결할 수 있는 최선의 대안으로서 수소 에너지 및 연료전지 기술에 대한 연구가 활발히 진행 중이다. 본 연구에서는 디메틸 에테르를 이용한 수소 생산 기술에 대한 연구를 수행하였다 디메틸 에테르(BATE)는 안정한 화합물로서 비 활성적이고 부식성이 없으며 발암성 및 마취성이 얼어 인체에 무해한 청청 연료로서 각광을 받고 있으며 특히 기존의 LPG 인프라를 그대로 사용할 수 있는 장점 등으로 수소 스테이션 및 소형 연료전지용 수소 발생기 등에의 적용을 위한 연구가 활발히 진행 중이다. 본 연구에서는 이러한 응용을 위한 수소 발생기용 DME 개질 반응기의 개발을 위하여 본 반응에 대한 촉매 종류의 영향, 공간속도의 최적화, 반응 메카니즘에 따른 촉매 선정, 반응온도 등의 다양한 반웅 조건에 대한 영향을 확인하고 실제 소형 연료전지를 위한 수소공급 장치로서 적용코자 마이크로채널 반응기에 적용하여 마이크로채널 DME 개질반응기의 컴팩트한 수소공급 장치로서의 적용 가능성을 평가하였다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.574-578
• /
• 2005

The project objectives, called critical-to-quality (CTQs) in six sigma, should be defined to faithfully reflect the customer requirements. The identification of such a set of CTQs, which is currently done using brainstorming in practice, is a challenging task. Notwithstanding the rapid growth of the six sigma literature, development of a systematic procedure for identifying CTQs has scarcely been addressed. This paper proposes a systematic method for generating CTQ candidates based on the given voice of the customer in the DFSS/C (Design for Six Sigma / Commercial) context. By providing a step-by-step procedure, the proposed method ensures that all the important CTQ candidates are identified and subjective judgments are minimally required. Hence, the shortcomings associated with the existing practice based on brainstorming can be effectively overcome. The unique characteristics of the proposed method are also demonstrated via a case study.

• Journal of Chest Surgery
• /
• v.39 no.5 s.262
• /
• pp.423-425
• /
• 2006

A case report of lymphangiohemangioma of the mediastinum that was misdiagnosed as thymic origin mass on chest CT and MR angiography. Operative finding revealed vascular proliferation originated from innominate vein and the pathologic finding showed both lymphatic and vascular component which was diagnosed lymphangiohemangioma.

• Korean Journal of Head & Neck Oncology
• /
• v.29 no.1
• /
• pp.11-13
• /
• 2013

Warthin's tumor is the second most common tumor of the parotid gland after pleomorphic adenoma. It is well known to occur as bilateral and multiple patterns. The incidence of extraparotid Warthin's tumor (EPWT) is about 2.7% to 12%, peri-parotid and upper cervical area are the most common sites. Warthin's tumor with synchronous intraparotid and extraparotid area is extremely rare, only a few cases have been reported. We report a-71-year old man with unilateral swelling of the parotid area and upper neck, pathologically confirmed Warthin's tumor with literature review.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1253-1256
• /
• 2007

A display device combining plasma display panel (PDP) and field emission display (FED) is proposed to achieve high luminous efficiency. The device can avoid the main energy loss channels of both PDP (ion loss) and FED (low CL efficiency). $2{\sim}6$”-diagonal test panels with carbon nano-tube (CNT) electron emitter and Xenon ambient gas showed the luminous efficiency of 4.14lm/W and brightness of $263cd/m^2$ at 35V (1kHz, 1% duty), indicating that it is a good candidate for the low voltage driven, highly efficient next generation display.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.607-608
• /
• 2006

In recent, it became necessary to develop the technology about electrodeless fluorescent lamp according to demand of the electrodeless fluorescent lamp system that used higher efficiency and advantage of long lifetime. Inductively coupled plasma is commonly used for electrodeless lamp due to its ease of plasma generation. An electric power efficiency of electrodeless fluorescent lamp has big relative property of gas in lamp, gas pressure, lamp formation, ingredients of magnetic substance and shape and action frequency etc. We used magnetic substance that open self-examination material of electrodeless fluorescent lamp antenna. Ferrite that is used in this experiment was Mn-Zn type. We have examined temperature and flux characteristic by frequency. Considering using frequency 2.65[MHz], Frequency was changed from 2.05(MHz) to 3.05[MHz] to recognize flux and temperature change of lamp. I used LMS(Lighting Measurement System) to measure flux and IR Camera to measure temperature of lamp.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2239-2240
• /
• 2006

In recent, it became necessary to develop the technology about electrodeless fluorescent lamp according to demand of the electrodeless fluorescent lamp system that used higher efficiency and advantage of long lifetime. Inductively coupled plasma is commonly used for electrodeless lamp due to its ease of plasma generation. An electric power efficiency of electrodeless fluorescent lamp has big relative property of gas in lamp, gas pressure, lamp formation, ingredients of magnetic substance and shape and action frequency etc. We used magnetic substance that open self-examination material of electrodeless fluorescent lamp antenna. Ferrite that is used in this experiment was Mn-Zn type. We have examined temperature and flux characteristic by frequency. Considering using frequency 2.65[MHz], Frequency was changed from 2.05[MHz] to 3.05[MHz] to recognize flux and temperature change of lamp. I used LMS(Lighting Measurement System) to measure flux and IR Camera to measure temperature of lamp.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.126-129
• /
• 2006

AC-plasma display panels were examined before and after the aging process to analyze the effect of the aging process. The gas analysis was done to detect the impurity gases out of the MgO film and phosphor by a residual gas analyzer. There were no differences found in the components. The MgO film was analyzed to find out the effect of an ion bombardment due to discharge. The surface roughness of the MgO film was different from regional groups due to the different degree of ion bombardments. XPS analysis showed that the 8 hour aging process was not sufficient to remove $Mg(OH)_2$ and $MgCO_3$ existed on the MgO surface. Photoluminescence measurement showed the small deterioration of blue and green phosphor.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.9
• /
• pp.25-34
• /
• 2005

This paper proposes a selection methodology composed of neural network (NN) and genetic algorithm (GA) to design optimal NN structure. We combine the characteristics of GA and NN to reduce the computational complexity of artificial intelligence applications and increase the precision of NN' prediction in the design of NN structure. Genetic selection approach of design parameters of NN is introduced to obtain optimal NN structure. Analyzed results for geotechnical problems are given to evaluate the performance of the proposed hybrid methodology.