• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.2
• /
• pp.94-104
• /
• 1999

Plate buckling is very important design criteria when the ship is composed of high tensile steel plates. In general, the plate element contributes to inplane stiffness against the action of inplane load. If the inplane stiffness of the plating decreases due to buckling including the secondary buckling, the flexural rigidity of the cross section of a ship's hull also decreases. In these cases, the precise estimation of plate's behaviour after buckling is necessary, and geometric nonlinear behaviour of isolated plates is required for structural system analysis. In this connection, the author investigated the geometric nonlinear behaviour of simply supported rectangular plates under uniaxial compression in the longitudinal direction in which the principle of minimum potential energy method is employed. Based on the energy method, elastic large deflection analysis of isolated palate is performed and simple expression are derived to discuss the bifurcation paint type buckling and limit point type buckling.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.321-326
• /
• 2007

The joined-wing is a new concept of the airplane wing. The fore-wing and the aft-wing arc joined together in the joined-wing. The range and loiter are longer than those of a conventional wing. The joined-wing can lead to increased aerodynamic performances and reduction of the structural weight. The structural behavior of the joined-wing has a high geometric nonlinearity according to the external loads. The gust loads are the most critical loading conditions in the structural design of the joined-wing. The nonlinear behavior should be considered in the optimization of the joined-wing. It is well known that conventional nonlinear response optimization is extremely expensive: therefore, the conventional method is almost impossible to use in large scale structures such as the joined-wing. In this research, geometric nonlinear response structural optimization is carried out using equivalent loads. Equivalent loads are the load sets which generate the same response field in linear analysis as that from nonlinear analysis. In the equivalent loads method, the external loads are transformed to the equivalent loads (EL) for linear static analysis, and linear response optimization is carried out based on the EL.

• Korean Journal of Agricultural Science
• /
• v.49 no.4
• /
• pp.909-921
• /
• 2022

Eggs are considered an excellent complete food because they contain many major energy sources, including protein. Eggs are one of the most widely consumed foods worldwide, and egg consumption is steadily increasing. Eggs are generally classified according to their quality and weight. Various characteristics of eggs must be considered for the design and effective utilization of equipment used for the transport, processing, packaging, and storage of eggs. In this study, egg surface area, volume, density, etc. were measured according to the grade of the egg. The values of several geometrical properties that were measured tended to increase with increasing egg grade. The smallest grade eggs had the lowest shell thickness and density. The electrical conductivity of the eggshell and its contents was measured with a self-made electrode and equipment. The egg shell showed properties similar to insulators, and as the thickness increased, the electrical conductivity tended to increase. The electrical conductivity of the egg yolk showed almost constant values under all conditions. The electrical conductivity of the egg white and mixture was particularly low at 0.1 kHz. Fouling and electrode corrosion occurred in a low frequency region due to the egg white. In this study, various geometric and electrical characteristics of eggs were measured, and based on this, factors that could serve as new indicators for egg processed production were analyzed and investigated.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.4
• /
• pp.169-177
• /
• 2009

Concurrent Engineering (CE) has presented new possibilities for successful product development by incorporating various product life-cycle functions from the earlier stage of design. In the product design, geometric representation is vital not only in its traditional role as a means of communicating design information but also in its role as a means of externalizing designer's thought process by visualizing the design product. During the last dozens of years, there has been extraordinary development of computer-aided tools intended to generate, present or communicate 3D models. However, there has not been comparable progress in the development of 3D-CAD systems intended to represent and manipulate a variety of product life-cycle information in a consistent manner. In the previous research, the authors proposed a novel concept called Minus Volume (MV) to incorporate various design information relevant to product life-cycle functions. This paper proposes the use of the MV concept for the collaborative design environment, where many team members are geographically distributed over the networked environment, including Internet, Intranet, WWW, etc. A prototype 3D-CAD system is implemented based on the MV concept and illustrated with the successful implementation of collaborative design example.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.1
• /
• pp.60-66
• /
• 1999

This study is to develop design sensitivity analysis method based on continuum theory for the actual buckling load of vehicle passenger compartment with respect to sizing design variables. For nonlinear structural analysis, both geometric and material nonlinear effects are considered. The total Lagrangian formulation for incremental equilibrium analysis and one-point linear eigenvalue problem for buckling analysis are utilized. Numerical methods are presented to evaluate design sensitivity expressions, using structural analysis results from FEM code. Optical design of vehicle passenger compartment with buckling constraint solved using Gradient projection method.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.11
• /
• pp.577-581
• /
• 2006

This paper deals with an automatic rotor design functional standard computation based on torque/volume for a synchronous reluctance motor(SynRM). The focus of this paper is the design relative to the torque/volume on the basis of each rated watt according to the rotor diameters of a SynRM. The coupled finite elements analysis (FEA) & sequential unconstrained minimization technique (SUMT) have been used to evaluate design solutions. The proposed procedure allows to define the rotor geometric design function according to the rotor diameter and rated watt starting from an existing motor or a preliminary design.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.6
• /
• pp.58-68
• /
• 2003

Despite the availability of 3D CAD systems, the designers in shipyards still use 2D CAD systems because of the need to produce drawings rapidly and a shortage of labor. The design information of ship structure contained in 2D drawings is represented by symbols that are well known among designers in shipyard. The shapes of symbols are recognized by analysis of experienced and knowledgeable designers. We propose a method for automatic recognition of 2D symbols and extraction of design information from the midship drawings. The shape and rationale of 20 symbols used in ship design have been analyzed, and symbols have been classified according to the analysis. Based on the classified symbols, the developed system recognizes the symbols expressed in 2D drawings. The meaningless geometric shape is translated into the design information including designer's intents. The extracted design data can be applied to the downstream design process in shipyards, and the 3D ship model can be automatically created.

• International Journal of CAD/CAM
• /
• v.6 no.1
• /
• pp.139-148
• /
• 2006

Catmull-Clark subdivision scheme provides a powerful method for building smooth and complex surfaces. But the number of faces in the uniformly refined meshes increases exponentially with respect to subdivision depth. Adaptive tessellation reduces the number of faces needed to yield a smooth approximation to the limit surface and, consequently, makes the rendering process more efficient. In this paper, we present a new adaptive tessellation method for general Catmull-Clark subdivision surfaces. Different from previous control mesh refinement based approaches, which generate approximate meshes that usually do not interpolate the limit surface, the new method is based on direct evaluation of the limit surface to generate an inscribed polyhedron of the limit surface. With explicit evaluation of general Catmull-Clark subdivision surfaces becoming available, the new adaptive tessellation method can precisely measure error for every point of the limit surface. Hence, it has complete control of the accuracy of the tessellation result. Cracks are avoided by using a recursive color marking process to ensure that adjacent patches or subpatches use the same limit surface points in the construction of the shared boundary. The new method performs limit surface evaluation only at points that are needed for the final rendering process. Therefore it is very fast and memory efficient. The new method is presented for the general Catmull-Clark subdivision scheme. But it can be used for any subdivision scheme that has an explicit evaluation method for its limit surface.

• Journal of Korean Society of Transportation
• /
• v.3 no.1
• /
• pp.3-21
• /
• 1985

Since the expressway was first opened in 1968 there has been continued demand for constructing new lines of expressway, and thus it amounts to 1,420.5km in total length as of 1984. As the expressway becomes to take up more important role in our country facing motorization traffic accidents have become more of social issues, although its accident rates are relatively low compared to those on general highways in Korea, which is among the highest in the world. The purpose of the study is to investigate the correlation between the traffic accident rates on the expressway and their geometric characteristics based upon 1982 data. In order to extract the correlationship among them on as much disaggregate basis, the study has carried out the analysis on the primary data aggregated on the 100 meter intervals. One of the important findings was, among others, the design criteria of the expressway should be reconsidered with respect to the radius of the curve, superelevation, climbing lane, composed gradients, interchange facilities, tunnels and so on.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.12
• /
• pp.1133-1139
• /
• 2014

This paper proposes a simple method to improve a sensitivity of a straightness measurement system for a linear stage, which is applied to a system based on a geometric optic method. An optical system for this method is composed of a corner-cube retro-reflector, a ball-lens and a twodimensional position sensitive detector (2D PSD). The effectiveness of the proposed method was examined theoretically, and verified experimentally using a prototype measurement system. The results show that the measuring sensitivity was dependent on the size of the ball-lens and the setup position of PSD from the ball-lens, and that the proposed method is efficient method to improve the measuring sensitivity.