• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.840-844
• /
• 2003

A study for increase of fan flow rate by geometric modification has been conducted to decrease temperature rise of marine generator inner part. Through experiment of a real product, a performance curve for various flow resistances was obtained. Flow analyses for each cases were done by using commercial code-FLUENT and the results were very similar to experimental data (0.7% deviation at normal operating condition). Through flow analysis results for various design geometric modification, a scroll type fan was adopted as a best design geometry with 100Pa more pressure and 22% more flow rate than original fan.

• 한국정보처리학회논문지
• /
• 제7권4호
• /
• pp.1271-1278
• /
• 2000

A general curve and surface is a basic method to generate Free-form object using the fundamental properties of blending function. In typical method, there is an overhead of calculating to present Free-form object with the line segments and interpolation algorithm, In this paper, for resolving this problem efficiently, it will propose the flexible Free-form curves/surfaces using Ball curve shape-preserving property. This method includes Geometric Continuity that is needed to design Free-form Surface of high degree consisted with many curves. Also, when lots of data are reduced using Geometric Property of Free-form curves, the shape-preserving property of resulting object can be maintained, then it can represent any Free-form object with less calculating .

• 한국정보처리학회논문지
• /
• 제7권4호
• /
• pp.1103-1111
• /
• 2000

The hyper-geometric distribution software reliability growth model (HGDM) usually assumes that all the software faults detected are perfectly removed without introducing new faults. However, since new faults can be introduced during the test-and-debug phase, the perfect debugging assumption should be relaxed. In this context, Hou, Kuo and Chang [7] developed a modified HGDM for imperfect debugging environment, assuming tat the learning factor is constant. In this paper we extend the existing imperfect debugging HGDM for tow respects: introduction of random sensitivity factor and allowance of variable learning factor. Then the statistical characteristics of he suggested model are studied and its applications to two real data sets are demonstrated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.774-778
• /
• 1996

Developed in this research is a surface modeling kernel for various CAD/CAM applications. Its internal surface representations are rational parametric polynomials, which are generalizations of nonrational Bezier, Ferguson, Coons and NURBS surface, and are very fast in evaluation. The kernel is designed under the OOP concepts and coded in C++ on PCs. The present implementation of the kernel supports surface construction methods, such as point data interpolation, skinning, sweeping and blending. It also has NURBS conversion routines and offers the IGES and ZES format for geometric information exchange. It includes some geometric processing routines, such as surface/surface intersection, curve/surface intersection, curve projection and so forth. We are continuing to work with the kernel and eventually develop a B-Rep based solid modeler.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.237-242
• /
• 2001

In this paper, we theoretically analyzed the NRRO(the non-repeatable run-out) of a ball bearing with ball geometric imperfection. The quasi-static and dynamic analysis of a ball bearing was performed to calculate the displacement of shaft center caused by the ball form errors while the shaft is rotating. From consideration of the generating mechanism of NRRO, it is found that the size and form errors of ball generate vibrations with (equation omitted)$\_$c/ and n(equation omitted)$\_$b/${\pm}$(equation omitted)$\_$c/(where n is even) components, respectively. The ball form errors of a ball bearing were precisely measured and NRRO of a ball bearing was calculated using the measured data. A statistical approach was peformed to analyze NRRO of ball bearings with radial errors.

• 수산해양기술연구
• /
• 제39권4호
• /
• pp.298-304
• /
• 2003

In this paper a free-form hull design program and performance prediction program for planing boat is introduced. This program enables the designer to do complex geometric hull shape design on a personal computer and accurately to predict power requirements for a given loading and velocity. For a free form design, Bezier curve model is adopted as a basic representation tool of curves and surfaces, and this program has versatile functions to do fairing jobs with a convenient graphical user interface. After creating a hull form the geometric data is provided in a manner compatible with a variety of analysis tools including 'Motion Analysis(by Zarnick)' for prediction of motion characteristics in regular waves, 'Running Attitude (by Savitsky)' for prediction of the running attitude and required power.

• Nuclear Engineering and Technology
• /
• 제47권3호
• /
• pp.284-292
• /
• 2015

A numerical calculation with the commercial computational fluid dynamics code CFX-14.0 was conducted for a test facility simulating the Canadian deuterium uranium moderator thermal-hydraulic. Two kinds of moderator thermal-hydraulic tests at Stern Laboratories Inc. were performed in the full geometric configuration of the Canadian deuterium uranium moderator circulating vessel, which is called a calandria tank, housing a matrix of horizontal rod bundles simulating calandria tubes. The first of these tests is the pressure drop measurement of a cross flow in the horizontal rod bundles. The other is the local temperature measurement on the cross section of the horizontal cylinder vessel simulating the calandria system. In the present study, the full geometric details of the calandria tank are incorporated in the grid generation of the computational domain to which the boundary conditions for each experiment are applied. The numerical solutions are reviewed and compared with the available test data.

• 한국CDE학회논문집
• /
• 제10권6호
• /
• pp.381-391
• /
• 2005

The design methodology of injection molding die has been changed from two-dimensional drafting to three-dimensional solid modeling, which is due to many advantages over the conventional methodology in terms of design modification and data associativity. In addition to the solid modeling capability, it is required for a mold designer to utilize a database management system that facilitates efficient mold design. In the paper presented is the implementation of a software program which automatically generates three-dimensional mold-bases including standard parts and slider parts, conforming to given geometric constraints. It is based on a commercial CAD system (Unigraphics NX) along with related API (application program interface) libraries. The research is expected to reduce design efforts and simplify construction of a complex three-dimensional mold-base model that is comprised of standard parts and slider parts, by use of the three-dimensional database and automatized geometric dimensioning.

• International Journal of CAD/CAM
• /
• 제8권1호
• /
• pp.11-20
• /
• 2009

The conventional methods of boundary-conformed 2D surfaces generation usually yield some problems. This paper deals with two boundary-conformed 2D surface generation methods, one conventional approach, the linear Coons method, and a new method, boundary-conformed interpolation. In this new method, unidirectional 2D surface has been generated using some of the geometric properties of the given boundary curves. A method of simultaneous displacement of the interpolated curves from the opposite boundaries has been adopted. The geometric properties considered for displacements include weighted combination of angle bisector and linear displacement vectors at all the data-points of the two opposite generating curves. The algorithm has one adjustable parameter that controls the characteristics of transformation of one set of curves from its parents. This unidirectional process has been extended to bi-directional parameterization by superimposing two sets of unidirectional curves generated from both boundary pairs. Case studies show that this algorithm gives reasonably smooth transformation of the boundaries. This algorithm is more robust than the linear Coons method and capable of resolving the 2D boundary-conformed parameterization problems.

• Journal of Ship and Ocean Technology
• /
• 제4권3호
• /
• pp.13-20
• /
• 2000

In recent years, a number of successful nesting approaches have been developed by using the various heuristic algorithms, and due to their application potential several commercial CAD/CAM packages include a nesting module for solving the layout problems. Since a large portion of the complexity of the part nesting problem results from the overlapping computation, the geometric representation is one of the most important factors to reduce the complexity of the problem. The proposed part representation method can easily handle parts and raw materials with widely varying geometrical shape by using the redesigning modules. This considerably reduces the amount of processed data and consequently the run time of the computer. The aim of this research is to develop parametric macro for two-dimensional layout on the Auto-CAD system. Therefore, this research can be called "pre-nesting".ing".uot;.