• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.1899-1902
• /
• 2003

Recently several methods have been developed for the virtual space construction. Generally, most of the methods are geometric-based rendering technic, but they are difficult to construct real-time rendering because of large data. In this paper, we present a three dimension image-based rendering method that enable a constant speed of real-time rendering regardless of object complexity in virtual space. The Proposed method shows good performance for the virtual space construction with high complexity.

• 호남수학학술지
• /
• 제25권1호
• /
• pp.3-15
• /
• 2003

We prove an analogue of the Robinson-Schensted correspondence between generalized biwords and oscillating semi-standard tableaux. We give a geometric construction of the correspondence and examine combinatorial properties of the correspondence.

• 한국강구조학회 논문집
• /
• 제11권4호통권41호
• /
• pp.417-424
• /
• 1999

본 논문에서는 3차원 강뼈대구조물의 비선형 해석 기법을 개발하였다. 본 해석은 재료적 비선형과 기하학적 비선형을 고려하였다. 재료적 비선형으로 휨에 의한 점진적인 소성화를 고려하였다. 기하학적 비선형으로 $P-{\delta}$와 $P-{\Delta}$ 효과를 고려하였다. 절점에서의 재료적 비선형성은 여러개의 화이버로 구성되어 있는 P-M 힌지 개념을 사용함으로써 고려하였다. 기하학적 비선형성은 안정함수 (Stability function)를 사용하여 고려하였다. 단 전단과 비틀림에 의해 발생하는 비선형형은 고려하지 않았다. 수치해석법으로는 수정변위증가법을 사용하였다. 본 연구에서 제안된 해석방법으로 예측된 하중-변위가 다른 해석기법의 결과들과 잘 일치하였다.

• 한국강구조학회 논문집
• /
• 제18권6호
• /
• pp.727-735
• /
• 2006

본 논문에서는 선행논문(김 등, 2005)을 확장하여 다절점 케이블요소를 포함하는 보-기둥 요소의 기하학적 비선형성에 대해서 논의하기로 한다. 먼저 이를 위해서Hermitial 다항식을 형상함수로 채택하고 보-기둥요소의 2차 효과를 포함하는 접선강도행렬에 다절점 케이블-트러스 요소에 대한 접선강도 행렬을 추가하여 전체좌표계에 대한 접선강도행렬을 구성하고 하중증분법에 의한 유한요소 해석과정을 제시한다. 이렇게 새로이 개발된 다절점 케이블-트러스 요소를 포함하는 뼈대 구조물의 기하학적 비선형성과 그 타당성을 검증하기 위하여 IPS(Innovative Prestressed Support) 시스템의 기하학적 비선형 해석을 실시하고 이의 결과를 선형탄성해석의 결과와 비교한다.

• Structural Engineering and Mechanics
• /
• 제5권5호
• /
• pp.541-552
• /
• 1997

In this paper the ultimate strength of the R/C cooling towers, which have initial imperfection and pre-cracked elements, is analyzed. The initial geometric imperfections arise from the unavoidable inaccuracies under the construction and the pre-cracks are assumed to be produced by the temperature stress gradients or cyclic loading under wind pressure and/or earthquake load. Both effects are strongly influenced on the strength of the R/C cooling tower shell structures. The reinforcing ratio is also the important factor to evaluate the ultimate strength of the R/C cooling tower shells. However we could not analyze these structures experimentally because of their large, analyses are the powerful schemes to evaluate the safety and reliability of these structures. The analyzed model is Port Gibson cooling tower shell. In the numerical analysis the geometric and material nonlinearities are taken into account.

• 유공압시스템학회논문집
• /
• 제4권2호
• /
• pp.1-6
• /
• 2007

During the last few decades, excavation automation has been investigated to protect the operator from the hazardous working environment and to relieve the cost of the skilled operator. Therefore, a number of modelling and controller design methods of the hydraulic excavator are proposed in many literatures to realize the excavation automation. In this article, a geometric approach far the multi-body system modeling is adopted to develop the excavator mechanism model that contains 4 kinematic loops and 12 links. Considering a simple soil mechanism model with a number of uncertain soil parameters, an adaptive trajectory tracking control strategy based on the developed excavator model is proposed. The improved performance of the designed controller over the simple PID controller is validated via the simulation study.

• Korean Journal of Geomatics
• /
• 제1권1호
• /
• pp.27-33
• /
• 2001

There are invisible wars going on to preoccupy required satellite information for national defense, industry and living in the out space. Therefore, Korea has developed and successfully launched KOMPSAT (Korea Multi-Purpose SATellite), Korea's first multi-pur pose applications satellite, on December 21, 1999. In the course of geometric corrections with KOMPSAT-1 images, an accuracy of GCP collections is analyzed by the coordinated of digital map respective and an accuracy according to the GCP disposition was analyzed as well. For disposition of GCP, it turned out that even distribution on the whole screen contributes to promote accuracy. These are expected to used as basic data in putting the KOMPSAT-1 geometric correction into practical use.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제43권2호
• /
• pp.177-186
• /
• 2004

In this paper, we introduce new functional definitions for school geometry based on DGS (dynamic geometry system) teaching-learning environment. For the vertices forming a geometric figure, we first consider the relationship between the independent vertices and dependent vertices, and using this relationship and educational considerations in DGS, we introduce functional definitions for the geometric figures in terms of its independent vertices. For this purpose, we design a new DGS called JavaMAL MicroWorld. Based on the needs of new definitions in DGS environment for the student's construction activities in learning geometry, we also design a new DGS based geometry curriculum in which the definitions of the school geometry are newly defined and reconnected in a new way. Using these funct onal definitions, we have taught the new geometry contents emphasizing the sequential expressions for the student's geometric activities.

• 대한수학교육학회지:수학교육학연구
• /
• 제10권1호
• /
• pp.139-159
• /
• 2000

The experimental software such as Cabri II, The Geometer's Sketchpad, etc. provides dynamic environment which construct and explore geometric objects interactively and inductively. It has the effects on mathematics itself differently from other technologies that are used in instruction. What is its characteristics\ulcorner What are the educational implication of it for the learning of geometry\ulcorner How is mental reasoning of geometric problems changed by transformation of the means of representation and the environment to manipulate them\ulcorner In this study, we answer these questions through the review of the related literatures and the analysis of textbooks, teaching materials using it and curricular materials. Also, we identify implications about how the criteria for choosing geometic content and the ways of constructing context, for orchestrating the students' exploration with the secondary geometry curriculum, can be changed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.83-84
• /
• 2019

Free-form buildings refer to geometric external structures in curved form, unlike conventional structures with straight lines. The development of construction technologies for the implementation of these Free-form buildings is ongoing. However, there are still many restrictions on the construction technology of Free-form buildings, resulting in problems such as increased construction period and increased construction costs. Therefore, it is urgent to develop building technology for the construction of Free-form building in order to secure competitiveness in the global Free-form building market. Accordingly, this study proposes Two-sided multi-point press technology that can solve problems of existing technology and implement FCP(Free-form Concrete Panel).