• Title/Summary/Keyword: Generators

Search Result 1,899, Processing Time 0.023 seconds

A NOTE ON EXPANSIVE ℤk-ACTION AND GENERATORS

  • Shah, Ekta
    • Communications of the Korean Mathematical Society
    • /
    • v.34 no.4
    • /
    • pp.1329-1334
    • /
    • 2019
  • We define the concept of a generator for a ${\mathbb{Z}}^k$-action T and show that T is expansive if and only it has a generator. Further, we prove several properties of a ${\mathbb{Z}}^k$-action including that the least upper bound of the set of expansive constants is not an expansive constant.

An Experimental Study on the Effects of the Boundary Layer and Heat Transfer by Vortex Interactions ( I ) - On the common flow down - (와동간의 상호작용이 경계층 및 열전달에 미치는 영향에 관한 연구 ( I ) - Common flow down에 관하여 -)

  • Hong, Cheul-Hyun;Yang, Jang-Sik;Lee, Ki-Baik
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.24 no.2
    • /
    • pp.288-297
    • /
    • 2000
  • This paper describes the results of an experimental investigation of the flow characteristics and the heat transfer rate on a surface by interaction of a pair of vortices. The test facility consists of a boundary-layer wind tunnel with a vortex introduced into the flow by half-delta wings(vortex generators) protruding from the surface. In order to control the strength of the two longitudinal vortices, the angles of attack of the vortex generators are varied from 20 degree to 45 degree, but spacings between the vortex generators are fixed to 4 cm. The 3-dimensional mean velocity downstream of the vortex generators is measured by a five-hole pressure probe, and the hue-capturing method using the thermochromatic liquid crystals has been used to provide the local distribution of the heat transfer coefficient. By using the method mentioned above, the following conclusions are obtained from the present experiment. The boundary layer is thinned in the regions where the secondary flow is directed toward the wall and thickened where it is directed away from the wall. The peak augmentation of the local heat transfer coefficient occurs in the downwash region near the point of minimum boundary-layer thickness. Streamwise distributions of averaged Stanton number on the measurement planes show very similar trends for all the cases(${\beta}=20^{circ},\;30^{\circ}\;and\;45^{\circ}$).

Effect of Injector Number on Combustion Characteristics of Full-scale Gas Generators (분사기 수에 따른 실물형 가스발생기 연소특성)

  • Ahn, Kyu-Bok;Seo, Seong-Hyeon;Lim, Byoung-Jik;Kim, Jong-Gyu;Lee, Kwang-Jin;Han, Yeoung-Min;Choi, Hwan-Seok
    • Aerospace Engineering and Technology
    • /
    • v.6 no.1
    • /
    • pp.128-135
    • /
    • 2007
  • Combustion characteristics of full-scale gas generators were studied experimentally by changing the injector number installed at the injector head. Three full-scale gas generators were utilized; they have same total mass flow rate but mass flow rates per injector are different. Thirteen, nineteen and thirty seven injectors, which have internal-mixing and double-swirl characteristics, are distributed in injector heads, respectively. The results showed that pressure fluctuations in the gas generators with 13 and 19 injectors didn't occur around longitudinal resonant frequency, however longitudinal-mode pressure fluctuation appeared slightly in the gas generator with 37 injectors. As the number of injectors increased, deviations of temperature distribution in the combustion chamber decreased gradually, but the damage of injector LOx posts became a little severe.

  • PDF

Detailed Measurement of Flow and Heat Transfer Downstream of Rectanglar Vortex Generators Using a Transient Liquid Crystal Technique (과도 액정 기법을 이용한 와동발생기 하류의 유동장 및 열전달 측정)

  • Hong, Cheol-Hyun;Yang, Jang-Sik;Lee, Ki-Baik
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.27 no.11
    • /
    • pp.1618-1629
    • /
    • 2003
  • The effects of the interaction between flow field and heat transfer caused by the longitudinal vortices are experimentally investigated using a five hole probe and a transient liquid crystal technique. The test facility consists of a wind tunnel with vortex generators protruding from a bottom surface and a mesh heater. In order to control the strength of the longitudinal vortices, the angle of attack of vortex generators used in the present experiment is 20$^{\circ}$, and the spacing between the vortex generators is 25mm. The height and cord length of the vortex generator is 20mm and 50mm, respectively. Three-component mean velocity measurements are made using a f-hole probe system, and the surface temperature distribution is measured by the hue capturing method using a transient liquid crystal technique. The transient liquid crystal technique in measuring heat transfer has become one of the most effective ways in determining the full surface distributions of heat transfer coefficients. The key point of this technique is to convert the inlet flow temperature into an exponential temperature profile using the mesh heater set up in the wind tunnel. The conclusions obtained in the present experiment are as follows: The two maximum heat transfer values exist over the whole domain, and as the longitudinal vortices move to the farther downstream region, these peak values show the decreasing trends. These trends are also observed in the experimental results of other researchers to have used the uniform heat flux method.

Effect of Injector Design on Combustion Characteristics of Full-scale Gas Generators (분사기 설계에 따른 실물형 가스발생기 연소특성 비교)

  • Ahn, Kyu-Bok;Seo, Seong-Hyeon;Lee, Kwang-Jin;Han, Yeoung-Min;Choi, Hwan-Seok
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2006.11a
    • /
    • pp.309-315
    • /
    • 2006
  • Effects of injector or design on combustion characteristics of full-scale gas generators were studied. Three full-scale gas generators, which have same total mass flow rate but mass flow rate per injector is different depending on their designs, were manufactured. Thirteen, nineteen and thirty seven injectors, which have internal-mixing and double-swirl characteristics, are distributed in injector heads, respectively. The results showed that special pressure fluctuations in the gas generators with 13 and 19 injectors didn't appear around longitudinal resonant frequency, but small longitudinal-mode instability appeared in the gas generator with 37 injectors. As the number of injectors installed in injector heads increased, temperature distribution in combustion chambers showed small deviations, but the damage of LOx posts increased.

  • PDF

Smart Cane for the blind interworking with Sound Signal Generator (음향 신호기와 연동하는 시각 장애인을 위한 스마트 지팡이)

  • Lee, Seong-Joo;Kim, Seok-Hoon;Jang, Won-Seok;Jwa, JeongWoo;Kim, Soon-Whan
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.17 no.6
    • /
    • pp.137-143
    • /
    • 2017
  • Facilities for pedestrian safety of the visually impaired are scarce on the walkway and crosswalk. Braille blocks are installed on the walkways and RF controlled signal lights and sound generators are installed on the crosswalk at the main intersection for the visually impaired. An RF remote control system using one frequency has a problem of simultaneously operating nearby signal lamps and sound generators at an intersection. In this paper, we develop the smart cane that uses a beacon to identify the signal lamp and sound generators installed on the crosswalk at intersections and to operate the signal lamps and sound generators in the direction of the walk by IR communication. The developed smart cane is able to provide the pedestrian navigation for the blind by interworking with mobile apps through Bluetooth communication.

Burning Characteristics of Smoke Generator of Pesticides Depending on Combustible Carrier and Formulation Type (제형과 가연성 담체에 따른 농약 훈연제의 연소 특성)

  • Lim, He-Kyoung;Kim, Yong-Whan;Cho, Kwang-Yun;Yu, Ju-Hyun
    • Applied Biological Chemistry
    • /
    • v.47 no.3
    • /
    • pp.325-331
    • /
    • 2004
  • In order to study the effect of formulation type on the burning characteristics of smoke generator, fenarimol smoke generators containing the powdered rice chaff as a combustible carrier were prepared by molding the kneaded mixtures into various shapes. Smoke generators containing wood flour as a combustible carrier were also prepared and compared with smoke generators containing rice chaff. All the fenarimol smoke generators moulded into powders, granules, and rods continuously burned out when the sodium chlorate content exceeded 11%. Regardless of their types, the highest smoking rate of fenarimol was observed with more than 13% of sodium chlorate. The smoking rate of active ingredient followed with the increasing order of powder (64.5%) < granule (78.4%) < rod (90.9%). The smoke rod was robust, easy to ignite, and showed the highest smoking rate among the tested formulations. When the mixture of wood flour and anti-flame agent was used as a combustible carrier, the burning rate was so slow that wood flour formulation seemed to be more suitable to a slow-burning fumigant rather than smoke generator.

Transient Characteristics of Wind Turbine-Generator Connected to a Power System (전력계통 연계 풍력-터빈 발전기의 과도특성)

  • Seo, Gyu-Seok;Park, Ji-Ho
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.14 no.6
    • /
    • pp.2966-2970
    • /
    • 2013
  • In this paper, a simulation study on dynamic characteristics of wind turbine generators is performed. The generation of electricity using wind turbines is being recently spotlighted as a renewable way. The wind is an infinite primary energy source. Further, other environmental impacts of wind power are limited as well. Therefore, the wind turbine generation itself has many advantages. However, when generators using wind turbines are connected to the conventional power system, the impact of the power system is different from that of the power system that consists of only synchronous generators, especially in dynamic characteristics. Therefore, it is essential to examine the characteristics of wind turbines in order to ensure reliable wind turbine generation in the power system containing wind turbine generators. In this paper, the dynamic characteristics of GE1.5MW wind turbine are simulated by using PSS/E. In the simulation of GE1.5MW wind turbine, wind speed variation, load change and voltage deviation of infinite bus are considered.

Do N37 and P37 Potentials Have Different Generators in Somatosensory Evoked Potential? - Analysis Using Gating Mechanism - (체성감각 유발전위에서 N37과 P37은 다른 발생기를 가지고 있는가? - gating 현상을 이용한 분석 -)

  • Park, Young Seok;Cha, Jae Kwan;Kim, Sang Ho;Kim, Jae Woo
    • Annals of Clinical Neurophysiology
    • /
    • v.1 no.2
    • /
    • pp.106-111
    • /
    • 1999
  • Backgroud : The generators of N37 and P37 of posterior tibial nerve somatosensory evoked potential(PTSEP) have not been exactly known. Recently, some reports suggested that P37 and N37 might have different generator. We conducted a study to know the generators of P37 and N37 of PTSEP using gating mechanism. Methods : We evaluated subcortical and cortical somatosensoy evoked potentials(SEPs) in response to posterior tibial nerve stimulation in 3 experimental conditions of foot movement and compared them with PTSEPs in full relaxation of foot. The experimental conditions were: (a) active flexion-extention of stimulated foot, (b) isometric contraction of the stimulated foot, (c) passive flexion-extention of the stimulate foot. We analyzed the latencies and amplitudes of following potentials; P30, N37, P37, and N50. Results : The amplitude of P30 potential did not change during at any paradigms. The amplitudes of P37 and N50 were significantly attenuated in all condition. However, the amplitude of N37 showed no significant change during at any paradigms. Conclusions : These results suggest that the generators of P37 and N37 of PTSEP be different in cortex.

  • PDF