• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.3
• /
• pp.119-126
• /
• 2003

The size of low voltage level conductor cables can be installed with a long length just like a aviation field, shall be determined for considering the ampacity of cable and the drop of voltage for the power system. Therefore, The size of the conductor cables may be larger one for considering the tolerable voltage drop comparatively, although the allowable ampacity of the conductor cables may have a margin in comparison with the rated full load current In this case, the conductor cables' allowable ampacity will be very larger than the rated full load current and the generated heat of the conductor will be relatively downed. The conductor cables' alternating current resistance corrected with the maximum allowable temperature of the conductors, has been applied on the general formula for the calculating the voltage drop in determinating the size of low voltage level conductor cables, and the resistance is larger than the resistance corrected with the actual temperature of the conductor cables. This paper was studied for the purpose of the conductor resistance corrected with the actual temperature rise of the conductor and address the economic design formula so that this studies shall minimize the errors which can be occurred in comparison with the general formula and which can be applied in design work for determining the size of low voltage level conductor cables.

• Korean Journal of Head & Neck Oncology
• /
• v.24 no.1
• /
• pp.9-14
• /
• 2008

The most important concern to do parotidectomy is correct identification of the facial nerve and preservation of the nerve function. Many descriptions for the localization and branching types of the facial nerve trunk have existed. During the parotid surgery, it is necessary to have knowledges about the incidence and prognostic aspect of a invasion of the facial nerve by the parotid tumors. The method of the dissection and the surgical extent of the parotid gland would be decided not only by the anatomic variation of the facial nerve. but also the size and location of the tumor. Invasion of the facial nerve in parotid malignancies is the most significant factors affecting the prognosis, so radical parotidectomy which consists of the total extirpation of the parotid gland in conjunction with resection of the facial nerve is often required for proper management. Radical parotidectomy is advocated for the surgical treatment of high grade malignancies and in selective recurrent benign tumors intimately involving the facial nerve. Unfortunately, the morphologic and functional deficits created by sacrificing the facial nerve can be emotionally and physically traumatizing to the patient. Therefore, when the facial nerve is sacrificed, immediate reconstruction of the facial nerve should be necessary. Immediate nerve repair with direct anastomosis of the resected nerve ends or placement of a cable nerve graft provides the better cosmetic and functional results. Surgical resection remains the mainstay of treatment for cancer of the parotid gland, and there is general agreement that facial nerve should not be sacrificed unless the tumor is adherent to, or surrounds the nerve. The following statement is described general principles of troublesome management of the facial nerve during surgery for parotid tumor.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.3
• /
• pp.51-61
• /
• 2010

Nowadays, there are various networked systems with many computers. In most networked systems, a crucial objective is to keep transmitting and/or receiving data continuously even though failures exist. How can one make a computer continue transmitting and/or receiving data even when there are some errors on a link? Fault-Tolerant Ethernet (FTE) can be a solution to this question. In this paper, we propose a Localized Software-based Fault-Tolerant Ethernet (LSFTE). Our new approach fulfills the general FTE requirements. It takes advantage of redundant cable lines to maintain communication in a faulty environment. A software layer, which uses a simple and effective algorithm, is added above the LAN card driver software to detect and overcome faults. For our approach, there is no need to change the existing hardware or the end-use interfaces. Furthermore, the fault-detection time is reduced significantly compared to the conventional software-based approach.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.1
• /
• pp.115-120
• /
• 2008

Use of the carbon nanotube is superior to general powder state materials of mechanical and electrical properties. Because its ratio of diameter and length (aspect ratio) is very large, it has been known as a type of ideal nano-reinforcement material. Based on this advantage, the existing carbon black of semiconductive shield materials used in power cables can acquire excellent properties by using a small amount of carbon nanotubes. Thus, we investigated the thermal properties of the carbon nanotube, such as thermal conductivity, specific heat, and DSC (Differential Scanning Calorimetry). We found that a high thermal resistance level is demonstrated by using a small amount of carbon nanotubes. As a result, this tendency confirms high cross-linking density in a new network in which the carbon nanotube between carbon black constitute molecules shows a bond by similar constructive properties.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.10
• /
• pp.59-66
• /
• 2011

In electric power system, the circuit breaker is not operated when the higher voltage then the rated TRV(transient Recovery Voltage) appeared in the circuit breaking, The TRV of a circuit breaker means the characteristics of reignition by the arc between two poles. and is decided by the value of connecting Impedance. In this paper we of carried out many kinds of experiments varying the types of bus, the types of installation, the length of installation between 22.9 [kV] level circuit breaker and MTR in general 154/22.9[kV] system, We also simulated the characteristics of TRV using EMTP-RV program. The suitability of TRV in assessed by Uc, RRRV(Rate of Rise of Recovery Voltage) which are defined by the international guide, IEC62271-100. The values of RRRV gained from the cable-made bus are 590[%] lesser than those from the NSPB-made bus respectively. So the triangled type is more rational in the aspect of TRV.

• Smart Structures and Systems
• /
• v.6 no.3
• /
• pp.263-275
• /
• 2010

In the last decade, wireless sensor networks have emerged as a promising technology that could accelerate progress in the field of structural monitoring. The main advantages of wireless sensor networks compared to conventional monitoring technologies are fast deployment, small interference with the surroundings, self-organization, flexibility and scalability. These features could enable mass application of monitoring systems, even on smaller structures. However, since wireless sensor network nodes are battery powered and data communication is the most energy consuming task, transferring all the acquired raw data through the network would dramatically limit system lifetime. Hence, data reduction has to be achieved at the node level in order to meet the system lifetime requirements of real life applications. The objective of this paper is to discuss some general aspects of data processing and management in monitoring systems based on wireless sensor networks, to present a prototype monitoring system for civil engineering structures, and to illustrate long-term field test results.

• Journal of Korean Association for Spatial Structures
• /
• v.18 no.3
• /
• pp.67-74
• /
• 2018

Recently, measuring instruments for SHM of structures has been developed. In general, the wireless transmission of sensor signals, compared to its wired counterpart, is preferable due to the absence of triboelectric noise and elimination of the requirement of a cumbersome cable. However, in extreme environments, the sensor may be less sensitive to temperature changes and to the distance between the sensor and data logger. This may compromise on the performance of the sensor and instrumentation. Therefore, in this paper, free vibration experiments were conducted using wireless MEMS sensors at an actual site. Measurement was assessed in time and frequency domain by changing the temperature variation at($-8^{\circ}C$, $-12^{\circ}C$ and $-16^{\circ}C$) and the communication distance (20m, 40m, 60m, 80m).

• Korean Journal of Health Education and Promotion
• /
• v.17 no.2
• /
• pp.151-163
• /
• 2000

Adopting the theory of enter-educate, this study was conducted to prevent the smoking by middle school students who had not started smoking yet. A famous pop music singer with high popularity among teenagers was cast on the public sponsored advertisement (PSA) on smoking prevention. This PSA was televised through major TV stations for two months. The effectiveness of this project was evaluated seven times. The effectiveness of the PSA, the role of the cast singer, the rate of seeing the PSA, and the impression about the PSA were evaluated. The viewer survey since the second period of the PSA revealed that most of the middle school students (79~94 percent) watched it. Among TV stations, MBC recorded the highest viewer rate as 69.6~72.0 percent of the middle school students watched the PSA at least once from this station. Also, the viewer rates of such cable TV stations as Mnet and OCN were quite high for their advertisement prices. The overall impression about the PSA was favorable. The contribution of the singer to this positive outcome was 60 percent and over. The effect of smoking prevention was also high as 93.7 percent of the middle school students replied that they would not start smoking. However, since this study dealt with the general public, it was not possible to control the effect of other factors systematically. Also, we could not measure the differences bewteen the pre-PSA and the post-PSA periods, so that the interpretation of the results has some limitation.

• The KIPS Transactions:PartD
• /
• v.9D no.1
• /
• pp.145-152
• /
• 2002

Recently most of the home and small-size company use ADSL(Asymmetric Digital subscriber Line) or Cable Modem for using Internet Services. The number of Internet IP Address in current Internet IP Address System(IPv4) that is consisted of 4byte is almost empty, so generally the IP Address assigned dynamically is used. This way is just OK in general uses, but not OK in Internet Servers operation. This paper designed the gateway(Gate-D) system which is enable any system that get IP Address assigned dynamically to serve Internet Server Services(Telnet, FTP, HTTP, Mail, etc …), and made sure the worth by using Telnet Server.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.21 no.3
• /
• pp.43-50
• /
• 1984

A body form, which experiences minimum vertical wave-exciting forces in the vicinity of a prescribed wave frequency in water of finite depth, is obtained by an approximate method. Its configuration has the symmetry with respect to the vertical axis, expressed in terms of exponential functions. By distributing three-dimensional pulsating sources and dipoles on the immersed surface of the body, a velocity potential is determined and subsequently hydrodynamic forces including the 2nd-order time-mean drift forces are calculated. The dynamic behavior of the body moored in irregular waves is investigated numerically by using central difference method. Hereby irregular wave trains are simulated with examining its repeatability by comparing the resulting spectrum with original one. Numerical results indicated that the body form obtained from the present analysis possesses in general a favorable hydrodynamic characteristics in comparison with a spherical buoy and that the maximum excursion of the body can be significantly reduced by setting pre-tension of an appropriate amount in the mooring cable.