• Economic and Environmental Geology
• /
• v.36 no.4
• /
• pp.269-274
• /
• 2003

This study, one of the projects for investigation of the precious metal deposits of the Circum-Pacific Ocean coon-tries, was performed in a gem field of Pailling, Cambodia, in which there are numbers of undeveloped mineral resources. The gem fields in the Pailling area are typically distributed in the laterite, lying on of weathered basalts. The gem grade of corundum is low in the surface soil horizon(less than 1 m in depth), but is higher in the subsurface. Occurrence and genetic environment of the precious stone are not concerned in the soils. A Precious stone that is already made from at the least upper part of volcanic rocks is produced in large quantities to undergoing to weathering of the rocks. A precious stone is made from upper part of the formation under the high temperature when volcano is vomiting or after vomiting. and/or made from between the formation under the high temperature when other volcano is vomiting. Volcanic rocks including precious stone are a little different from other volcanic rocks when volcano is vomiting, but chemical composition of rocks is not far different from other volcanic rocks.

• Journal of Environmental Impact Assessment
• /
• v.17 no.5
• /
• pp.321-330
• /
• 2008

Methane is a potent greenhouse gas and methane emissions from landfills have been linked to global warming. In this study, LandGEM (Landfill Gas Emission Model) was applied to predict landfill gas quantity over time, and then this result was compared with the data surveyed on the site, Cheongju Megalo Landfill. LandGEM allows the input of site-specific values for methane generation rate (k) and potential methane generation capacity $L_o$, but in this study, k value of 0.05/yr and $L_o$ value of $170m^3/Mg$ were considered to be most appropriate for reflecting non-arid temperate region conventional landfilling, Cheongju Megalo Landfill. High discrepancies between the surveyed data and the predicted data about landfill gas seems to be derived from insufficient compaction of daily soil-cover, inefficient recovery of landfill gas and banning of direct landfilling of food garbage waste in 2005. This study can be used for dissemination of information and increasing awareness about the benefits of recovering and utilizing LFG (landfill gas) and mitigating greenhouse gas emissions.

• BMB Reports
• /
• v.39 no.1
• /
• pp.22-25
• /
• 2006

The gene encoding MPB83 from Mycobacterium bovis Vallee111 chromosomal DNA was amplified by using polymerase chain reaction (PCR) technique, and the PCR product was approximately 600bp DNA segment. Using T-A cloning technique, the PCR product was cloned into pGEM-T vector and the cloning plasmid pGEM-T-83 was constructed successfully. pGEM-T-83 and pET28a(+) were digested by BamHI and EcoRI double enzymes. The purified MPB83 gene was subcloned into the expression vector pET28a(+), and the prokaryotic expression vector pET28a-83 was constructed. Plasmid containing pET28a-83 was transformed into competence Escherichia coli BL21 (DE3). The bacterium was induced by isopropyl-$\beta$-D-thiogalactopyranoside (IPTG) and its lysates were loaded directly onto sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE), approximately 26 kDa exogenous protein was observed on the SDS-PAGE. The protein was analyzed using Western-blotting. The results indicated that the protein was of antigenic activity of M. bovis. The results were expected to lay foundation for further studies on the subunit vaccine and DNA vaccine of MPB83 gene in their prevention against bovine tuberculosis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.11
• /
• pp.5446-5463
• /
• 2019

Parallel computing system components should be harmonized, and this harmonization is kept existent using synchronization time. Synchronization time affects the system in two ways. First, if we have too little synchronization time, some tasks face the problem of harmonization, as they need appropriate time to update and synchronize with the system. Second, if we allocate a large amount of time, stall system created. Random allocation of synchronization time for parallel systems slows down not only the booting time of the system but also the execution time of each application involved in the system. This paper presents a simulator used to test and allocate appropriate synchronization time for distributed and parallel heterogeneous systems. The simulator creates the parallel and heterogeneous system to be evaluated, and lets the user vary the synchronization time to optimize the booting time. NS3-cGEM5 simulator in this paper is formed by HLA-RTI federation integration of the two independent architecture and network simulators - NS3 and cGEM5. Therefore, nodes created on these simulators need synchronizations for harmonized system performance. We tested and allocated the appropriate synchronization time for our sample parallel system composed of one x86 server and three ARM clients.

• Journal of the Korean Society of Systems Engineering
• /
• v.11 no.1
• /
• pp.55-65
• /
• 2015

In steel making plant, sampling system for raw material such as iron ore, limestone is necessary for quality control purpose. For the sake of efficiency and productivity, automation of the sampling system is highly desirable. From technical standpoint, the development of the automated system requires multi-disciplinary domain knowledge such as mechanical engineering, industrial engineering, information technology and computer engineering. Up to present time, the development has been mainly carried out by a single domain expert with project manager. The automated system developed in this way caused problems in the final system. This paper suggests a systems engineering approach to the development of automation for raw material sampling plant via a tailored process called Plant Systems Engineering (PSE) Process based on ISO/IEC 15288. Through the PSE process, we could derive right requirements and architecture of the Systems Of Interest (SOI), and we were convinced that the PSE Process can be applied to many other Plant Systems.

• Journal of the Korean Society of Systems Engineering
• /
• v.10 no.2
• /
• pp.59-69
• /
• 2014

In the bidding stage of turn-key based plant construction contracts, owners provide design and performance basis for contractors instead of giving design drawing. To win the bid for a plant construction, the contractors should be obliged to satisfy and ensure owners'requirements such as design and performance basis in a plant construction project, In other words, owners imposes technical risk of the design to the contractors by specifying responsibility for the analysis and verification of the plant construction. Thus, it is very important that contracters make accurate and realistic basic design plan in a short period of time. To deal with such a situation, we propose a systems engineering approach for the analysis and management of the technical risk. Specifically, we first: 1) Analyzes technical risk related with the plant design information for the bidders, followed by 2) Developing stakeholder requirements for the basic engineering design, and 3) System requirements for dealing with technical risk. Also, in this paper, we proposed converting method from MOE(Measure of Effectiveness) to MOP(Measure of Performance) in the risk analysis. To show the effectiveness of the proposed method, we carried out a case study.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.90.1-90.1
• /
• 2012

Understanding the dynamics of relativistic electron acceleration, loss, and transport in the Earth's radiation belt during magnetic storms is a challenging task. The U.S. National Science Foundation's Geospace Environment Modeling (GEM) has identified five magnetic storms for in-depth study that occurred during the second half of the Combined Release and Radiation Effects Satellite (CRRES) mission in the year 1991. In this study, we show the responses of relativistic radiation belt electrons to the magnetic storms by comparing the time-dependent 3-D Versatile Electron Radiation Belt (VERB) simulations with the CRRES MEA 1 MeV electron observations in order to investigate the relative roles of the competing effects of previously proposed scattering mechanisms at different storm phases, as well as to examine the extent to which the simulations can reproduce observations. The major scattering processes in our model are radial transport due to Ultra Low Frequency (ULF) electromagnetic fluctuations, pitch-angle and energy diffusion including mixed diffusion by whistler mode chorus waves outside the plasmasphere, and pitch-angle scattering by plasmaspheric hiss inside the plasmasphere. We provide a detailed description of simulations for each of the GEM storm events.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.5
• /
• pp.188-192
• /
• 2015

Gemological and spectroscopic properties of HPHT synthetic diamonds from New Diamond Technology (NDT) company in St. Petersburg (Russia) were examined. Their color (colorless, near-colorless with some boron and Fancy blue with high boron content) and clarity ($VVS-SI_1$) grades were comparable to those of top natural diamonds. NDT synthetic diamonds fluoresced and phosphoresced blue or orange under SWUV light. Photoluminescence spectra revealed H3 center with very small intensity and NV centers. The intensity of H3 in NDT synthetic diamond has very weak in comparison with natural one. Using a combination of gemological and spectroscopic tests, gem-quality synthetic diamonds from NDT can be distinguished from natural diamonds of similar quality.

• Fashion & Textile Research Journal
• /
• v.23 no.4
• /
• pp.439-447
• /
• 2021

The purpose of this study is to examine the evolution of precious metal and gem stores, and to derive the characteristics of this period from the government, industry, and consumers. Correspondingly, the contents of daily newspaper articles during this period were analyzed using Naver's news library search engine. The historical development process is as follows. Before the Korean War, precious metal jewelers operated in Jongno, Namdaemun, and Chungmuro, dealing with gold, silver, and platinum. Large stores not only sold jewelry and watches, but also functioned as craftsmen and watch repairers. After the war, a shopping district for precious metals and jewelry was formed around Midopa Department Store. By 1963, the number of jewelry stores in Seoul increased to about 130 and to about 280 by 1966. The characteristics of the government, industry, and consumers are as follows. The government continued to implement a policy to regulate the precious metal and jewelry industry. Despite challenges, the industry exhibited the potential for foreign currency acquisition and growth through domestic amethyst. Consumers could access information regarding precious metal jewelry in daily newspapers. In the late 1960s, various types of jewelry were distributed in line with an increase in income levels.

• Journal of the Korean earth science society
• /
• v.32 no.7
• /
• pp.750-760
• /
• 2011

In this study, the reproducibility of the simulated current climate by using two regional climate models, such as Seoul National University Regional Climate Model (SNURCM) and Weather Resuearch and Forecasting (WRF), is evaluated in advance to produce the standard regional climate scenario of future climate. Within the evaluation framework of a COordinated Regional climate Downscaling EXperiment (CORDEX), 28-year-long (1978-2005) regional climate simulation was conducted by using the Hadley Centre Global Environmental Model (HadGEM2-AO) global simulation data of the National Institute of Meteorological Research (NIMR) as a lateral boundary forcing. The simulated annual surface temperatures were in good agreement with the observation; the spatial correlation coefficients between each model and observation were over 0.98. The cold bias, however, were shown over the northern boundary in the both simulated results. In evaluation of the simulated precipitation, the skill was reasonable and good. The spatial correlation coefficients for the precipitation over the land area were 0.85 and 0.79 in SNURCM and WRF, respectively. It is noted that two regional climate models (RCMs) have different characteristics for the distribution of precipitation over equatorial and midlatitude areas. SNURCM shows better distribution of the simulated precipitation associated with the East Asia summer monsoon in the mid-latitude areas, but WRF shows better in the equatorial areas in comparison to each other. The simulated precipitation is overestimated in summer season (JJA) rather than in spring season (MAM), whereas the spatial distribution of the precipitation in spring season corresponds to the observation better than in summer season. Also the RCMs were capable of reproducing the annual variability of the maximum amount and its timing in July, in which the skills over the inland area were in better agreement with the observation than over the maritime area. The simulated regional climates, however, have the limitation to represent the number of days for extremely hot temperature and heavy rainfall over South Korea.