• Bulletin of the Korean Chemical Society
• /
• v.30 no.7
• /
• pp.1547-1552
• /
• 2009

Sphingomonas chungbukensis DJ77 has the ability to produce large quantities of an extracellular polysaccharide that can be used as a gelling agent in the food and pharmaceutical industries. We identified, cloned and expressed the UDP-glucose dehydrogenase gene of S. chungbukensis DJ77, and characterized the resulting protein. The purified UDP-glucose dehydrogenase (UGDH), which catalyzes the reversible conversion of UDP-glucose to UDPglucuronic acid, formed a homodimer and the mass of the monomer was estimated to be 46 kDa. Kinetic analysis at the optimal pH of 8.5 indicated that the $K_m\;and\;V_{max}$ for UDP-glucose were 0.18 mM and 1.59 mM/min/mg, respectively. Inhibition assays showed that UDP-glucuronic acid strongly inhibits UGDH. Site-directed mutagenesis was performed on Gly9, Gly12 Thr127, Cys264, and Lys267. Substitutions of Cys264 with Ala and of Lys267 with Asp resulted in complete loss of enzymatic activity, suggesting that Cys264 and Lys267 are essential for the catalytic activity of UGDH.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.469-473
• /
• 2017

In this study, the rheological characteristics of kerosene based gel propellants were investigated. For the gelling agent, Thixatrol$^{(R)}$ has been used with 100 nm nano-sized aluminium particle addition. Three gellant contents of 2.5 wt%, 5 wt% and 7.5 wt% kerosene gels were first investigated where aluminium particles contents of 10 wt% and 20 wt% were added to 7.5 wt% gellant case. The viscosities of each sample measured by rotational rheometer show that the viscosity augments as gellant or aluminium content increases while the 20 wt% aluminum content resulted in failure of measurement due to the agglomerations of aluminum particles.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.456-461
• /
• 2017

In this study, the rheological properties of nitromethane gel propellants on nano/micron sized gelling agent are investigated. Silicon dioxide is used as the gellant with 5 wt%, 6.5 wt% and 8 wt% concentration, respectively, where the measurements are conducted under steady-state shear flow conditions using a rotational rheometer. The nitromethane/silicon dioxide gel showed non-Newtonian flow behavior for the entire experimental shear rate ranges. The gel fuels with nano-sized gellant had a slightly higher viscosity than the gel fuels with micron-sized one for low shear rate range. Additionally, it was found that Herschel-Bulkley model can hardly describe the rheological behavior of nitromethane gel propellant, but the NM model(by Teipel and Forter-Barth) is better suited to explain the rheological behavior of nitromethane gel propellant.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.618-624
• /
• 2010

This study was conducted to establish the in vitro seed germination of Loranthus tanakae. A factorial experiment evaluated the effects of seed storage duration (0, 8, 16 weeks), media (MS, SH, White, WPM), presence of viscin, GA3, gelling agent and concentrations. Seed germinated after one week culture in in vitro condition and produced radicles. In vitro seed germination was optimal when the seeds removed viscin placed on SH medium (69%) and the addition of 0.35% gelrite (75%) in the same medium. As seed storage duration was expanded to 8 or 16 weeks, in vitro seed germination rate was reduced rapidly. Holdfasts were also produced at the side of radicles. The important factors to produce holdfast and haustorium was kind of media as an optimal condition in White medium without any supplements to be shown 98% and 8% respectively. Process of in vitro germination of Loranthus tanakae was followed to radicle elongation, holdfast development and then haustorium formation sequencially.

• Toxicological Research
• /
• v.25 no.1
• /
• pp.51-58
• /
• 2009

Carrageenan is a naturally-occurring sulfated polygalactan which has been widely used in the dairy industry and a gelling agent in non-dairy products. In this study, four short-term in vitro genotoxicity assays were investigated to evaluate the potential genotoxic effects of carrageenan. The mutagenicity of carrageenan was evaluated up to a maximum dose of 5 mg/plate in Ames test. There was no increase in the number of revertant colonies compared to its negative control at any dose in all of strains tested. To assess clastogenic effect, the in vitro chromosomal aberration assay was performed using Chinese hamster lung cells. Carrageenan was not considered to be clastogenic in this assay at up to the highest feasible concentration which could be evaluated. The in vitro comet assay and micronucleus test results obtained on L5178Y cells also revealed that carrageenan has no genotoxicity potential, although there was a marginal increase in micronuclei frequencies and DNA damage in the respective micronucleus and comet assays. Taken together, our results indicate that carrageenan was not genotoxic based on four in vitro genotoxicity results.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.569-580
• /
• 2018

The possibility of applying poulticing was studied for removing Paraloid B72, a resin used for fixing an earthen mural painting. Five types of poultices were selected from clay and gel types, and acetone, ethanol, and methyl ethyl ketone(MEK) were used as mixed solvents. The possibility of mixing between the poultice and solvent was investigated, and then the spreadability, fluidity, acidity, drying properties, and solubility of the poultices were examined to confirm the characteristics. A poultice agent, which is suitable for applying to a mural painting, was selected and applied to a painting layer sample coated with Paraloid B72. As a result, all painting layers were good condition at under 50% of the solvent. The removal efficiency of Paraloid B72 was more effective when most of the solvents were used at 50%, rather than at 25%. However, it is difficult to mix 50% of MEK and ethanol with the gel-type poultices. When used at 25%, the removal performance was poorer than that at 50%, but the mixing with all the poultices was successful. In addition, the adsorption and removal power of the gel-type poultice were better than those of the clay-type, but the latter was expected to be more suitable in short-time cases due to its high drying speed. The results of this study show that the dissolution performance varies depending on the poultices and solvents. Hence, the poultice and solvent should be selectively applied, considering the fixative of the mural to be removed.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.1
• /
• pp.300-308
• /
• 2021

In this study, 3D networked poly(sodium acrylate) gel was polymerized and controlled with the crosslinking environment to evaluate the mechanical properties and swelling behavior. In general, as the degree of crosslinking in a pre-gelled solution increases, the swelling ratio of the 3D networked gel decrease while the mechanical strength of the gel increases. Interestingly, this study demonstrates that the polymerization and crosslinking efficiency in gelling process could be depended on the crosslinking environment by evaluating the number of elastically cross-links in 3D networked gel. As a result, the number of elastically corss-links would be changed with 3.6 times as varying of the crosslinking environment while keeping the degree of crosslinking. It is expected that the 3D networked gel would be optimized as an effective absorbing agent for VOCs by using the gel evaluation method based on the number of elastically cross-links.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.1
• /
• pp.99-106
• /
• 1998

Two kinds of carrageenan were extracted from red seaweeds, Tichocarpus crinitus, collected in The Peter the Great Bay of Russia on August, 1996. One is KC1-insoluble carrageenan and another is KC1-soluble carrageenan. The yield of KC1-insoluble carrageenan was 17.15%, which is composed of 18.06% total sulfate, 5.61% protein, 3.51% K+, 0.49% Na+, 1.66% Ca2+, 54.26% galactose, 4.68% xylose, trace of mannose and glucose. The yield of KC1-soluble carrageenan was 3.52%, which is composed of 24.06% total sulfate, 5.2% protein, 5.32% K+, 0.16% Na+, 2.80% Ca2+, 33.54% galactose, 5.48% xylose, 4.32% mannose, trace of glucose. But rhamnose was not detected in both case. FT-IR spectrum showed that the KC1-insoluble carrageenan was kappa-type carrageenan and that KC1-soluble carrageenan was lambda, iota hybrid-type carrageenan. KC1-insoluble carrageenan was very weakly formation the gel compared with KC1-insoluble carrageenan from other red seaweeds. So we investigated viscosity. Both type carrageenan was stable in the temperature until 9$0^{\circ}C$, 1 hr. The viscosity of the solution of KC1-insoluble carrageenan was increased to about two folds by K+, but was not changed by Ca2+. The viscosity of the solution of KC1-soluble carrageenan was reduced by K+ and Ca2+. Both of them was stabilized in alkali but was reduced in comparison with acid conditions. In this study, both carrageenan was expected as thickening agent than gelling agent for food additives.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.2
• /
• pp.101-109
• /
• 2003

Provitamin $B_5$ liquid crystal ($PVB_5$-LC) was the new emulsion system to enhance moisturizing activity on the skin. In this study, it should be mentioned that PVB5-LC could be prepared with the main compound of hydrogenated lecithin (HL) in oil-in water (O/W) emulsion. The key ingredient of humectants was contained 2% of provitamin $B_5$ ($PVB_5$) into the $PVB_5$-LC. The best suitable compositions of $PVB_5$-LC were made from 4.0 wt% of HL, 4.0 wt% of cetostearyl alcohol (CSA) as emulsifier and gelling agent, 3.0 wt% of 1,3-butylene glycol (1,3-BG) and 2.0 wt% of glycerin as moisturizers, 3.0 wt% of cyclomethicone (CMC), 3.0 wt% of isononanoate (ININ), 3.0 wt% of capric/caprylic triglyceride (CCTG), 3.0 wt% of macadamia nut oil (MNO) as emollients. As the analytical result of $PVB_5$-LC, it could know that the distribution range of particle size was 0.14 to 12.37 m level (mean size 3.24 m). It was certified the multi lamellar phase around the droplet of liquid crystal when observed the droplet particles through a polarization microscope. And it clinically was tested the effectiveness of moisturizing activity (in-vivo) compared with control sample (O/W emulsion). The effectiveness of moisturizing activity of $PVB_5$-LC with Skincon-200EX after 6 hours went up 49.0% (p<0.05, n=20) whereas the effectiveness of moisturizing activity of generally O/W emulsion cream was 25.7% (p<005, n=20). Also, in case of Comeometer CM-825, the moisturizing activity of $PVB_5$-LC after 6 hours rose 36.6% (p<0.05, n=20) whereas the effectiveness of moisturizing activity of generally O/W emulsion cream was 10.8%. Therefore, it was known that the effectiveness moisturizing activity of $PVB_5$-LC with HL was remarkably superior compared with O/W emulsion cream.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.1
• /
• pp.25-33
• /
• 2020

To improvement the swelling characteristics of the existing cutoff wall against the moisture, the permeability of the sand, calcium bentonite and solidifier mixture according to the contact with trichloroethylene (TCE) was evaluated. Characteristics analysis and the permeability test of the research materials were performed. The permeability was decreased as the mixing ratio of the calcium bentonite was increased and it was increased as the mixing ratio of the solidifier was increased. In conclusion, when mixing 15% of calcium bentonite and more than 30% of solidifier, the permeability coefficient in the underground water movement was analyzed as more than α × 10^-4 cm/sec showing that it does not block the underground water movement. In addition, as the permeability coefficient of mixtures after TCE reaction was analyzed as less than α ×10^-7 cm/sec, it satisfied the condition of blocking layer (less than 1.0 × 10^-6 cm/sec). Therefore, the calcium bentonite and solidifier can be utilized as barrier that showing the characteristic of percolation ability conversion in soil and underground water contaminated with TCE.