• Journal of Advanced Marine Engineering and Technology
• /
• 제34권8호
• /
• pp.1057-1067
• /
• 2010

다단 기어연쇄, 베어링, 축, 로터로 구성되는 함포용 synchro system의 구동장치를 개발하기 위하여, AGMA규격에 의한 기어 굽힘강도, 면압강도해석, 기어치형설계를 포함한 정적설계를 수행하였다. 또한 전달행렬법을 효과적으로 적용시킬 수 있는 Hibner's branch법과 자유도가 큰 경우에도 계산 오차 없이 고유특성치를 빠뜨리지 않고 산출할 수 있는 ${\lambda}$-matrix법을 도입하여 함포용 Synchro system의 좌우 선회용과 상하 고각형의 위험속도 해석 및 평가를 하였고, 운전속도 범위 내에 위험속도가 존재하지 않았다.

• 한국기계가공학회지
• /
• 제15권4호
• /
• pp.67-72
• /
• 2016

Planetary gear sets are widely used in power transmission components, which have high efficiency and good durability. Their most important design parameter is the load-sharing characteristics among several planetary gears. In this study, the load sharing of planetary gears was analyzed according to the carrier pinhole position error of planetary gear sets. The loads acting on planetary gears varied with the pinhole position error of the carrier, and the load sharing of planetary gears improved as the input load increased. In addition, the load of the planetary gear with a carrier pinhole position error was relatively higher than that of other planetary gears without carrier pinhole position errors. This trend appeared more clearly in the non-floating-type carrier than the floating-type carrier.

• 대한기계학회논문집A
• /
• 제27권10호
• /
• pp.1720-1727
• /
• 2003

The object of this work is to develop the measurement method of the transmission error of the helical gears. For this purpose, experimental set up is designed by 3D CAD software. It consists of the motor, inverter, powdered brake equipment, torque sensor and helical gearbox. In this study, tangential linear accelerometers were used as the methods for the transmission error measurement. the acceleration signals are transmitted to the signal conditioners through the slip rings and the transmission errors are obtained by a specially designed circuit board. The transmission errors are analyzed in the frequency domain. As a result, The periodicity of the transmission error is confirmed in the mesh frequency and its harmonics. The magnitude of harmonic components is very dependent on the natural frequencies of the gear system. It usually increases with the rotational speed. However, it does not always increase with torque.

• 한국기계가공학회지
• /
• 제21권2호
• /
• pp.116-122
• /
• 2022

This study proposed a method of testing the stability when selecting gears to reduce the weight of a 3-DOF wrist mechanism for a pick-and-place 3-DOF parallel robot with an increased workspace by using an additional straight axis at its top. We performed SolidWorks^® modeling- and ANSYS^®-based structural analysis of a pinion gear, which is most vulnerable to the force from a 3-DOF wrist mechanism, to lighten the robot weight for performing various tasks. When the initial analysis results considerably differed from the theoretical values calculated in advance, we checked and identified the errors in the contact conditions or input values. Ultimately, it is believed that the methodology presented in this paper will help in mitigating errors during analysis and determine the accurate values for a lightweight 3-DOF wrist mechanism for a parallel robot with an expanded workspace.

• 한국안전학회지
• /
• 제25권3호
• /
• pp.7-14
• /
• 2010

In order to analyze the vibro-impacts in the torsional system, several clearance types of nonlinearities should be included with the analytical or numerical method. These kinds of nonlinear factors can cause the errors while the system is calculated specifically with the numerical method, also it might take too long to get right answers with the every nonlinearity in the original system. Therefore, there are several methods developed for the sake of overcoming the deficiency of the analysis with the original system and saving the calculating time. The original system can be reduced by keeping the system characteristics such as from 14 to 6 DOF. Especially, since the torque flow in the torsional system is connected with the specific gear ratios, the original system can be transferred into the simpler system corresponding to each gear ratio rather than the original system, which can also show the same system characteristics such as the natural frequencies and the mode shapes. By using the reduced system, the calculating time can be saved and the redundant nonlinear effects for the system analysis can be ignored without any numerical errors.

• 수산해양기술연구
• /
• 제60권2호
• /
• pp.152-160
• /
• 2024

We analyzed risk factors of coastal gillnet fishers during fishing process and considered work safety measures to reduce safety accidents during fishing using a UWB (ultra wideband) based positioning system. The static position accuracy of the UWB based positioning system was 45 cm. When entering a port, there is a risk of falling overboard. When casting a net, there was a risk of falling overboard due to being hit by fishing gear or guards, or getting caught in a buoy line or sinker line. When hauling a net, there is a risk of getting caught between fishing gear and net hauler, and the risk of musculoskeletal disorders due to repetitive work over a long period of time. Most safety accidents during work on fishing boats are blamed on human errors of the fisher and skipper, but safety accidents occur due to a mixture of mechanical and equipment factors, work and environmental factors, and management factors in addition to human errors. Therefore, the 4E were presented as countermeasures against the 4M, which are causes of safety accidents, and the proposed measures were used to identify risk factors for operation process, comply with work safety rules, and ensure the wearing of personal protective equipments. We need to reduce safety accidents during work by making it part of our daily routine. These research results can be used in the future for optimal placement of fishing gear and fishing nets in other coastal industries where safety accidents occur frequently.

• 한국안전학회지
• /
• 제23권4호
• /
• pp.13-18
• /
• 2008

This study deals with finish roll forming by forced displacement can be conceived as a method of eliminating errors in conventional form rolling under constant loads. This method produces a high-precision tooth profile by low-speed form rolling when a high rigid screw or cam is used at the pressurized section. Tooth profile is decided in the beginning of roll forming and ${\delta}_{max}$ mainly increases if the number of roll forming process is increased. Gear class is improved by one or two class after roll forming if the gear has convex type error and pressure angle error in KS 4 class. If the gear have concave type error and pressure angle error and pressure angle error, gear class is not improved in theory, but improved a little in practice. In the finishing roll forming, it inevitably yields both the concaving of tooth profile and plastic deflection of addendum of teeth. Experiments show that the concaving and the plastic deflection are successfully reduced, the accuracy of tooth profile reaches to KS 0 class.

• 대한전자공학회논문지TC
• /
• 제38권4호
• /
• pp.18-26
• /
• 2001

본 논문에서는 극성 판단(Polarity Decision) PD를 이용하여 모드 변환과 루프이득(Loop Gain)의 변환시점을 자동적으로 검출해 주는 ATC(Automatic Transfer mode Control)알고리즘을 설계하고 모드 전환시 안정적으로 주파수 오프셋을 추정하는 평균방식 Gear-shift PLL을 설계하였다. 제안하는 모드 전환 시점 검출 알고리즘인 ATC 알고리즘은 종전의 QPSK방식에 적용되던 Lock Detector 알고리즘보다 구현이 매우 간단하며 정확하게 모드 전환시점을 검출한다. 또한 Shift Register에 저장했던 주파수 추정 값들을 평균하는 평균전환방식은 모드 전환시 낮은 주파수 추정 에러값으로 다음 모드에서의 빠른 추적 성능을 가능하게 한다. 본 논문에서 제안하는 알고리즘은 적은 회로 면적과 고속 처리가 가능하도록 설계되어 ASIC 설계에 매우 유용하다. 아울러 본 논문에서는 극성판단 PD를 적용하여 위상 포착 및 추적 성능평가를 수행하고 성좌도(constellation)를 각 모드별로 분석하였다.

• 항공우주기술
• /
• 제4권2호
• /
• pp.15-20
• /
• 2005

지금까지 착륙장치에 대한 다물체 동역학은 주로 구조물을 강체로 가정하여 지상하중 및 지상거동에 대해 활발한 연구가 진행되어 왔고, 실제 착륙장치 개발에 사용되고 있으나 강체 다물체 동역학에서는 구성품들을 대부분 강체로 가정하기 때문에 해석결과에 많은 오차가 포함될 수 있다. 특히 착륙장치 시스템의 경우 지상 충격시 3축 방향으로 매우 큰 하중이 발생하고 이로 말미암아 구조 변형이 크게 발생한다. 따라서 구조물을 강체 대신 실제에 보다 가까운 유연체로 모델링을 하는 유연 다물체 동역학 해석을 도입하면 보다 정확한 해석결과를 얻을 수 있다. 반면, 유연 다물체 동역학 해석을 실시하기 위해서는 동역학 모델 및 유한요소 모델 등을 준비하는데 상당한 시간과 기술이 요구된다. 본 연구에서는 반디호에 장착된 복합재 판스프링 착륙장치 구조물을 모델로 지상충격하중 및 동적거동을 예측할 수 있는 프로그램을 개발하였다.

• Journal of Biosystems Engineering
• /
• 제41권3호
• /
• pp.145-152
• /
• 2016

Purpose: This study aims to establish the effect of pinhole position errors in the planet carrier of a planetary gear set (PGS) on load sharing among the planet gears in the hydromechanical transmission (HMT) system of an agricultural tractor. Methods: A simulation model of a PGS with five planet gears was developed to analyze load sharing among the planet gears. The simulation model was verified by comparing i ts r esults w ith those of a model developed in a previous s tudy. The verified simulation model was used to analyze the load-sharing characteristics of the planet gears with respect to the pinhole position error and the input torque to the PGS. Results: Both simulation models had identical load magnitude sequences for the five planet gears. However, the load magnitudes on the corresponding planet gears differed between the models because of the different stiffnesses of the PGS components and the input torques to the PGS. The verified simulation model demonstrated that the evenness of load sharing among the planet gears increases with decreasing pinhole position error and increasing input torque. Conclusions: The geometrical tolerance of the pinhole position should be properly considered during the design of the planet carrier to improve the service life of the PGS and load sharing among the planet gears.