• 한국자동차공학회논문집
• /
• 제3권6호
• /
• pp.212-223
• /
• 1995

To improve the efficiency of a power transmission system with slip elements, power split/circulation system is applied. The performance of a power split/circulation system varies widely by the change of the followings; the layout of system, the type and gear ratio of planetary gear, the performance of slip element, etc. Therefore, when one designs such a power transmission system or when one determines the economic/power mode of system, a certain performance prediction method is needed. In this study, the internal power flow pattern of a power split/circulation system is theoretically analyzed on several transmission systems. And an effective performance prediction method(so called performance locus diagram) is presented. By this method, the effects of design factors can be easily understood and the qualitative performances of system can be clearly evaluated.

• 대한기계학회논문집A
• /
• 제27권4호
• /
• pp.491-498
• /
• 2003

In this paper, dynamic characteristics of an epicyclic gear train considering Coriolis effect have been studied. High speed transmissions such as in an aircraft engines will be strongly influenced by Coriolis effect. Gear meshes were modelled as springs and dampers with periodically varying mechanical constants with time. The loci of planet gear, sun gear. and carrier were analyzed. Maximum values of mesh forces between sun gear and planet gear(S/P) as well as between planet gear and ring gear(P/R) have been simulated as function of rotating speed.

• 대한기계학회논문집A
• /
• 제22권1호
• /
• pp.198-205
• /
• 1998

In this paper, the dynamic characteristics of a star type epicyclic gear train have been analyzed. Nonlinear stiffness of a gear pair were obtained considering the bending and shear deformation, Hertz contact deformation, as well as tooth fillet deformation. Nonlinear stiffness coefficients and damping coefficients around the static equilibrium position were obtained by perturbation method. The loci of the planet gears and sun gear were estimated. Tooth meshing forces and bearing reaction forces were calculated. The effects of bearing clearance and oil viscosity on the gear behavior were also analyzed.

• 대한기계학회논문집
• /
• 제14권1호
• /
• pp.43-53
• /
• 1990

본 연구에서는 변속장치로 사용되는 유성치차장치에 있어서 특히 피치오차와 편심오차가 동시에 존재할 경우도 고려하여 내접치차, 태양치차 혹은 유성캐리어 등이 각각 고정되었을 경우의 회전호차를 해석하였다. 이러한 해석을 통하여 각 치차의 오차에 의한 태양치차 혹은 내접치차의 중심변위궤적을 컴퓨터 시뮬레이션으로 화면상 에 나타나게 하여 실제 태양치차나 내점치차의 중심변위를 측정했을 때 그 변위 궤적 만을 보고도 오차가 존재하는 치차를 진달할 수 있도록 한다. 또, FFT(Fast Fourie- r Transform)를 이용한 파워 스펙트럼 분석법을 도입하여 컴퓨터 프로그램을 작성한 후 이를 이용하여 변위신호의 주파수 분석을 수행함으로써 이 방법이 치차의 오차 진 단에 더욱 효율적임을 밝히고자 한다.

• 한국전산구조공학회논문집
• /
• 제14권3호
• /
• pp.329-337
• /
• 2001

본 연구에서는 무단변속시에 사용되며, 세 개의 유성기어로 구성된 복합유성기어가 기어의 회진시 비선형적인 기어의 강성과 감쇠를 고려하여 모델링 되었고, 복합유성기어의 운동 방정식이 유도되었다. 소음과 진동의 원인인 선기어의 중심궤적이 구하여진 상태방정식에 4차 룬게-쿠타 수치해석 방법을 수행함으로써 구하였다.

• Journal of Biosystems Engineering
• /
• 제18권2호
• /
• pp.91-99
• /
• 1993

Kinematic analysis was made on a gear type high speed planting mechanism for riding-type rice transplanters. The kinematic equations thus derived were computer coded to simulate its motion characteristics such as a planting locus, velocities and accelerations of gears and planting knife, etc. Using the simulation program a sensitivity analysis of design parameters was also carried out to determine their effects on the planting performance. Of the design parameters the eccentricity of the gear was found most influential.

• Journal of Biosystems Engineering
• /
• 제25권6호
• /
• pp.445-456
• /
• 2000

A can type high-speed transplanting mechanism was developed. The mechanism consists of a cam and an epicycle gear train with one sun gear in the middle and four planet gears in a row but symmetric with respect to the sun gear. Two planting knives are pivoted on the two outer gears. When sun gear rotates with a constant velocity the planting knife rotates also with a constant velocity. This constant motion of the transplanting knife is accelerated partially by a cam fixed in the gear housing so that the locus of the planting knife becomes similar to that generated by a crank-type transplanting mechanism. This cam-type transplanting mechanism can solve the problems associated with the rotary-type transplanting mechanisms. The mechanism was designed with an aid of computer simulation and proved applicable to high speed transplanters by its mock-up model. The design process of the mechanism was presented and dynamic analysis was also carried out to show the advantages of the mechanism over the rotary type high-speed planting mechanism.

• 한국항공우주학회지
• /
• 제39권7호
• /
• pp.605-611
• /
• 2011

쉬미는 항공기의 이착륙 시 랜딩기어가 주행도중 측방향 및 조향방향의 진동이 발생하는 현상이다. 쉬미 현상은 스트럿의 낮은 강성, 랜딩기어 내부의 유격, 휠의 불균형이나 마모된 부품 등으로 인해 발생하며, 항공기의 안정성을 저하시킨다. 본 연구는 소형항공기의 쉬미 안정성 검토를 위해 수행되었다. 수치해석을 위하여 소형항공기의 전방 착륙장치를 선형시스템으로 모델링하고 상태방정식을 수립하였다. 근궤적 기법을 이용한 주파수 영역 해석과 4차 Runge-Kutta 방법을 이용한 시간영역 해석을 통해 쉬미 현상을 예측하였고 주요 변수의 설계범위를 검토하였다. 현 착륙장치는 와셔의 압축력을 이용하여 조향 방향 마찰을 가함으로써 쉬미현상을 저감하는 기법을 채택하고 있으므로 마찰을 기술함수를 이용하여 선형화시키고 상태방정식에 적용하여 해석을 수행함으로써 쉬미의 발생이 저감되는 결과를 확인하였다.

• 한국자동차공학회논문집
• /
• 제4권4호
• /
• pp.87-96
• /
• 1996

The proportional pressure control valve(PCV) is an essential component in the open loop controlled rear wheel steering gear of the four wheel steering(4WS) system on the passenger car. The valve should have versatile functions and higher performance. But, it is hard to find the proportional pressure control valve suitable for the 4WS system. In this paper, the determination of the valve parameters was studied by the stability discrimination and the characteristic analysis for the purpose of the development of a new PCV for the 4WS. The mathematical model of the valve was derived from the valve-cylinder system and the programme for numerical computation was developed. The transfer function of the system was obtained from the mathematical model. The characteristics of the valve were inspected through the experiment and compared to those obtained by numerical method. And then the stability discrimination of the system was done by root locus and the analysis of characteristics was done by the developed programme. From the experiment and the analysis of characteristics was done by the developed programme. From the experiment and the inspection, the appropriation of mathematical model and the usefulness of the programme were confirmed. And the parameters which might affect the performance of the valve can be determined by considering the stability discrimination, the characteristics analysis and required functions.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.1121-1124
• /
• 1999

Linear motor is able to produce line movement without rotary-to-line converter at the system required line moving. Thus Linear motor has no gear, screw, belt for line movement. Therefore it has some advantage which decrease friction loss, noise, vibration, maintenance effort and prevent decay of control performance due to backlash. This paper proposes the estimation method of unknown parameters from the BLDC Linear motor and determine the PI controller gain through this estimation. Each control movement that is current, speed, position control, and PWM wave generation is performed on Processor, which is DSP(Digital Signal Processor), having high speed performance. PI theory is adopted to each for controller for control behavior More fast convergence to command position is accomplished by applying the new velocity locus which derived from position error.