• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.233-236
• /
• 2001

We have designed and fabricated ASK modulator MMIC operating at 5.8GHz for OBE used in AGPS (Automatic Gate Passing System). ASK modulator MMIC was designed to apply a sing1e supply voltage of 3V to the drain in order to decrease ACP (Adjacent Channel Power). The measurement result of this chip exhibits on/off characteristic over 30dB. The design parameters are optimized through ADS simulation tool. The layouts and fabrication o( ASK Modulator MMIC were designed and fabricated by using ETRI 0.5${\mu}{\textrm}{m}$ MESFET library. The chip sizes were 1mm $\times$1mm. The performance analysis of the implemented ASK Modulator based on the design parameters is accomplished.

• 한국안전학회지
• /
• 제34권1호
• /
• pp.21-26
• /
• 2019

This paper is purposed to develop hardware for controlling abnormal temperature that can occur environment and component itself in PCS. In order to be purpose, the hardware which is four part(sensing, PLC, monitoring and output) keep detecting temperature for critical components of PCS and can control the abnormal temperature. Apply to the hardware, it is selected to PV power generation facilities of 20 kW in Cheong-ju city and measured the data for one year in 2017. Through the temperature data, it is found critical components of four(discharge resistance, DC capacitor, IGBT, DSP board) and entered the setting value for operating the fan. The setting values for operating the fan are up to $130^{\circ}C$ in discharge resistance, $60^{\circ}C$ in DC capacitor, $55^{\circ}C$ in IGBT and DSP board. The hardware is installed at the same PCS(20 kW in Cheong-ju city) in 2018 and the power generation output is analyzed for the five days with the highest atmospheric temperature(Clear day) in July and August in 2017 and 2018 years. Therefore, the power generation output of the PV system with hardware increased up to 4 kWh.

• 대한전자공학회논문지TC
• /
• 제43권5호
• /
• pp.128-136
• /
• 2006

본 논문에서는 3GPP 중계기 및 기지국용 50W급 Doherty 전력증폭기를 설계 및 제작하였다. 이상적인 Doherty 전력증폭기는 효율개선과 고출력 특성이 뛰어나지만 이를 구현하기 위해서는 바이어스 조절이 어렵다. 이를 해결하고자 기존의 Gate 바이어스 조절회로를 가진 Doherty(GDCHD) 전력증폭기에 Drain 바이어스 조절회로를 첨가한 GDCHD(Gate and Drain Control Hybrid Doherty) 전력증폭기를 구현하였다. 실험결과 3GPP 동작주파수 대역인 $2.11{\sim}2.17\;GHz$에서 이득이 57.03 dB이고, PEP 출력이 50.30 dBm, W-CDMA 평균전력 47.01 dBm, 5MHz offset 주파수대역에서 -40.45 dBc의 ACLR 특성을 가졌으며, 각각의 파라미터는 설계하고자 하는 증폭기의 사양을 만족하였다. 특히 GDCHD 전력증폭기는 일반적인 Doherty 전력증폭기에 비해 ACLR에 따른 효율 개선성능이 우수하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1091-1093
• /
• 2001

The power semiconductor is widely used in the power plant or industrial field because of genealization and enlargement. It has been controlled and operated according to its own control method. Especially in case of Power plant, it plays a major role in AVR(Automatic Voltage Regulator) or electro chlorination control circuits. Generally, they used in Analog control system at above field. But each SCR current value is different because of load unbalance or switching characteristic variations, it may cause power plant unit trip or system disorder according to SCR element burn out or bad operating condition. Therefore, in this paper a development of 3 phase current balance control algorithm is described. it gets over the past analog control system limit, controls SCR gate firing angle for 3 phase current balance.

• 한국산업융합학회 논문집
• /
• 제2권2호
• /
• pp.103-108
• /
• 1999

The paper describes a implementation of space vector pulse-width modulation voltage source inverter and interfacing of DSP using field programmable gate array(FPGA) for a induction motor vector control system. The implemented chip is included logic circuits for SVPWM, dead time compensation and speed detection using Quick Logic, QLl6X24B. The maximum operating frequency and delay time can be set to 110MHz and 6 nsec. The designed Application Specific Integrated Circuit(ASIC) for SVPWM can be incorporated with a digital signal processing to provide a simple and effective solution for high performance induction motor drives with a voltage source inverter. Simulation and implementation results are shown to verify the usefulness of ASIC in a motor drive system and power electronics applications.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권10호
• /
• pp.1027-1032
• /
• 1996

The auto-illumination controller for office, residence, and so on was studied. The system consists of parts of a power supply, a signal oscillator, a lamp controller and two kinds of sensor. The lamp controller has two thyristors triggered by the IR sensor(SCRI) and CdS sensor(SCR2) respectively, When the illuminance around this system is higher than operating value of its sensor, lamp is turned off automatically. Otherwise, the light of lamp gets dim by CdS sensor. In case IR sensor senses the body heat of people around itself, the illuminance of the lamp gets maximum. The illuminance of the lamp can be changed dimmly by control of the variable resistor (RV) connected with SCR2 in series. The turning - on time of the lamp can be also controlled using a variable resistor(Rt) connected with a signal oscillator in parallel. Changing resistance Rt changes the time constant(.tau.), which triggers the gate of SCR2. Though people left the surrounding of lamp, the lamp keeps light for a while.

• 융합보안논문지
• /
• 제17권2호
• /
• pp.41-51
• /
• 2017

인터넷 활용 범위의 폭발적인 증가는 점차적으로 네트워크 속도와 용량을 초고속화 하고 대용량화로 빠르게 진화해 가고 있다. 이에 따라 스위치 라우터 등 네트워크 장비들은 하드웨어에 기반 한 빠른 기술 진화로 대처를 하고 있으나 초연결사회에 가장 기본적이고 필수적인 네트워크 보안시스템의 기술 진화는 수만 가지의 보안 이슈와 시그니처(signature)에 대해서 수시 변경과 갱신을 필요로 하기 때문에 소프트웨어에 기반 한 기술적인 한계를 극복하기가 쉽지 않다. 본 논문은 이와 같은 DDoS 대응 장비를 설치 운영할 때의 패킷 필터링 속도 저하 문제점을 개선하고자 FPGA(Field Programmable Gate Array)의 하드웨어적인 특성과 병렬처리 특성을 최대한 반영한 DPI 알고리즘인 Hi-DPI를 제안하고 실용성을 검증하고자 한다.

• Transactions on Electrical and Electronic Materials
• /
• 제18권4호
• /
• pp.229-236
• /
• 2017

This paper deals with the design and implementation of an efficient topology for cascaded multilevel inverters with reduced part counts. In the proposed design, a well-established basic unit is first developed. The series extension of this unit results in the formation of the proposed multilevel inverter. The proposed design minimizes the number of power electronic components including insulated-gate bipolar transistors and gate driver circuits, which in turn cuts down the size of the inverter assembly and reduces the operating power losses. An explicit control strategy with enhanced device efficiency is also acquired. Thus, the part count reductions enhance not only the economical merits but also the technical features of the entire system. In order to accomplish the desired operational aspects, three algorithms are considered to determine the magnitudes of the dc voltage sources effectively. The proposed topology is compared with the conventional cascaded H-bridge multilevel inverter topology, to reflect the merits of the presented structure. In continue, both the analytical and experimental results of a cascaded 31-level structure are analyzed. The obtained results are discussed in depth, and the exemplary performance of the proposed structure is corroborated.

• 센서학회지
• /
• 제30권4호
• /
• pp.236-242
• /
• 2021

In this paper, we report the fabrication of the tip-on-gate of a field-effect-transistor (ToGoFET) probe using a standard complementary metal-oxide-semiconductor (CMOS) process and the performance evaluation of the fabricated probe. After the CMOS process, I-V characteristic measurement was performed on the reference MOSFET. We confirmed that the ToGoFET probe could be operated at a gate voltage of 0 V due to channel ion implantation. The transconductance at the operating point (Vg = 0 V, Vd = 2 V) was 360 ㎂/V. After the fabrication process was completed, calibration was performed using a pure metal sample. For sensitivity calibration, the relationship between the input voltage of the sample and the output current of the probe was determined and the result was consistent with the measurement result of the reference MOSFET. An oxide sample measurement was performed as an example of an application of the new ToGoFET probe. According to the measurement, the ToGoFET probe could spatially resolve a hundred nanometers with a height of a few nanometers in both the topographic image and the ToGoFET image.

• 방송공학회논문지
• /
• 제2권1호
• /
• pp.8-15
• /
• 1997

본 논문에서는 하나의 TMS320C31 Digital Signal Processor (DSP)를 사용하여 실시간으로 동작하는 Motion Picture Experts Group-1 (MPEG-1) 오디오 인코더 시스템을 구현하였다. 우선 MPEG-1 Audio Layer-2 및 심리음향모델-1 관련 기본 알고리듬을 C-언어로 구현하여 기본 동작을 확인하였다. 그리고 전체실행 시간을 줄이기 위하여, 이를 다시 Texas Instruments (Tl) 어셈블리어로 작성하였다. 마지막으로, MPEG-1 오디오 인코더 시스템을 위한 실제 DSP 하드웨어 회로 보드를 설계, 제작하였다. Analog-to-Digital Converter (ADC) 제어, 입출력 제어, 그리고 DSP 보드에서 PC로의 비트열 전송과 같은 주변 모듈들은 Very High Speed Hardware Description Language (VHDL)을 사용하여 Field Programmable Gate Array (FPGA)로 구현하였다. 제작된 시스템은 48 KHz로 샘플링 되는 스테레오 오디오 신호를 실시간으로 처리하여 192 kbps 비트율로 부호화된 비트열을 출력시킨다. 다양한 형태의 스테레오 오디오 신호를 통해, 제작된 오디오 인코더 시스템의 실시간 동작과 양질의 오디오 신호가 복원됨을 확인하였다.