• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.275-278
• /
• 2005

This study has focused on manufacturing technique of powder injection molding of watch case which made from zirconia powder. A series of computer simulation process was applied to prediction of the flow pattern in the inside of the mould and defects as weld line. The material properties of melted feedstock inclusive of the PVT graph and thermal viscosity flowage properties were measured for obtaining the input data in computer simulation. Also, molding experiment was conducted and the results of experiment showed that good agreement with simulation results far flow pattern and weld line location. On the other hand, gravity and inertia effect have an influence on velocity of melt front because of high density of ceramic powder particles in powder injection molding against the polymer injection molding process. In the experiment, the position of melt front was compared with upper gate and lower gate position. The gravity and inertia effect could be confirmed in the experimental results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.170-175
• /
• 2005

Generally, Aluminum is superior to durability, light, and characteristics of the material are embossed luminant. So, these characteristics of aluminum will be used automobile interior parts by aluminum injection moulding. Especially, The external of Aluminum plate is engraved differing pattern by roller working. This working can use any longer and be seen gracefully. This is the reason why aluminum insert moulding is used. This feature of research can be characterized by simple process to customize aluminum sheet of blanking and forming process with internal parts of configuration if products are injected by aluminum sheet. Besides, to analysis completed Automobile interior parts to be concerned volumetric shrinkage, best gate location, fill time analysis and so on through the mold-flow before the aluminum insert moulding is worked.

• 건축역사연구
• /
• 제28권4호
• /
• pp.17-26
• /
• 2019

After opening Suwon railway station in 1905, a new road was constructed between Suwon station and Paldalmun(the South gate). It was the starting point to change urban structures of Suwon and shape the new city scape. In 1914, administrative districts of Suwon were reorganized. Suwon-myeon (township, a subdivision of Suwon-gun) was promoted to Suwon-eup(town) in 1931. Suwon-eup expanded its territory and changed the address system from 'li(里)' system to Japanese address system, 'Jeong(町)' in 1936. From 1920s, road system was changed and transformed Suwon's urban structures. A straight road was built from Jongro intersection to Janganmun(the north gate) in 1928. Another straight road was constructed between Suwon station to Padamun in the early 1930s. Public office buildings used the Hwa Seong HaengGung(華城行宮) and some of building moved to new location with new buildings. Main buildings of most schools in Suwon were reconstructed since 1930s. Commercial buildings and stores were sprung up and had their own characteristics by region. Around Suwon station, there are more hotels and restaurants than other areas. Rearranging administrative areas, developing road system and new buildings transformed Suwon's spatial structures. Constructing new roads formed a straight road passing through Suwon. After reorganizing administrative areas, this road turned to be the central axis of Suwon. Buildings in new style on the axis made the modern cityscape in Suwon.

• Elastomers and Composites
• /
• 제48권4호
• /
• pp.300-305
• /
• 2013

사출성형에서 성형수축은 피할 수 없는 현상이다. 따라서 성형수축을 줄이기 위한 연구가 필요할 뿐만 아니라 성형수축의 특성을 명확히 파악하는 것이 필요하다. 본 연구에서는 유리섬유로 보강된 폴리카보네이트를 이용하여 2.5차원형상인 환상형상의 시편에서 보이는 성형수축 현상을 조사하였다. 환상시편은 외경의 크기와 두께를 달리하여 설계하였다. 성형조건은 수지온도, 보압시간 및 보압크기를 변수로 설정하였다. 여러 성형조건으로 성형된 시편에서 내경과 외경의 크기가 변하는 양상에 대해서 분석하였다. 성형된 시편의 외경과 내경의 치수는 금형의 치수보다 작게 나타났다. 시편의 외경이 클수록, 그리고 시편의 두께가 두꺼울수록 수출율은 작게 나타났다. 또한 게이트의 위치에 따라 수축의 크기가 방향성을 보였다. 따라서 성형된 시편은 원형이 아니라 타원형으로 나타났고 게이트 방향으로 내경과 외경이 가장 큰 수축을 보였다. 수축된 제품의 형상조절을 위해서는 게이트 설계와 같은 금형설계가 중요하다고 판단된다.

• 대한전자공학회논문지SD
• /
• 제48권9호
• /
• pp.1-5
• /
• 2011

본 논문에서는 AlGaN/GaN HEMT의 DC 및 RF 특성을 최적화 하기위해서 2차원 소자 시뮬레이터를 이용하여 연구를 진행하였다. 먼저, AlGaN층의 두께, Al mole fraction 의 변화에 따른 2차원 전자가스 채널의 농도변화가 생기는 현상을 바탕으로 DC특성을 분석하였다. 다음 게이트, 소스, 드레인 전극의 크기와 위치 변화에 따른 RF 특성을 분석하였다. 그 결과 Al mole fraction이 0.2몰에서 0.45몰로 증가할수록 전달이득(transconductance, $g_m$) 과 I-V 특성이 향상됨을 확인하였다. 한편 AlGaN층의 두께가 10nm에서 50nm로 증가할수록 I-V특성은 향상되지만 $g_m$은 감소하는것을 확인하였다. RF 특성에서는 게이트 길이가 가장 큰 영향을 미치며 그 길이가 짧을수록 RF특성이 향상되는 것을 확인하였다.

• 한국기계가공학회지
• /
• 제21권7호
• /
• pp.84-90
• /
• 2022

The purpose of the cover housing component of a car door is to protect the terminals of the plug housing that connects the electric control unit on the door side to the car body. Therefore, for a smooth assembly with the plug housing and to prevent contaminants from penetrating into the gaps that occur after assembly, the warpage of the cover housing should be minimized. In this study, to minimize the warpage of the cover housing, optimization was performed for design factors related to the mold and processes based on the injection molding simulation. These design factors include gate location, gate diameter, injection time, resin temperature, mold temperature, and packing pressure. To optimize the design factors, Taguchi's approach to the design of experiments was adopted. The optimal combination of the design factors and levels that minimize warpage was predicted through L₁₈-orthogonal array experiments and main effects analysis. Moreover, the warpage under the optimal design was estimated by the additive model, and it was confirmed through the simulation experiment that the estimated result was quite consistent with the experimental result. Additionally, it was found that the warpage under the optimal design was significantly improved compared to both the warpage under the initial design and the best warpage among the orthogonal array experimental results, which numerically decreased by 36.9% and 23.4%, respectively.

• 한국농공학회논문집
• /
• 제65권1호
• /
• pp.73-81
• /
• 2023

To understand salinity status of fresh water and paddy soils and the susceptibility of rice to salinity stress of Gunnae reclaimed tidelands, salinity monitoring was conducted in rainy and dry seasons. For fresh water, a high salinity was observed at the sampling location near the sluice gate and decreased with distance from the gate. This spatial pattern of fresh water salinity indicates the necessity of spatial distribution of salinity in the assessment of salinity status of fresh water. Interestingly, there was significant correlation between rainfall amount and salinity, implying that salinity of fresh water varies with rainfall and thus it may be possible to predict salinity of water using rainfall. Soil salinity also higher near the gate, reflecting the influence of high saline water. In addition, the groundwater salinity also high to threat rice growth. Though soil salinity status indicated low possibility of sodium injury, there was changes in soil salinity status during the course of rice growth, suggesting that more intensive monitoring of soil salinity may be necessary for soil salinity assessment. Our study suggests the necessity of intensive salinity monitoring to understand the spatio-temporal variations of salinity of water and soil of reclaimed tideland areas.

• 건축역사연구
• /
• 제20권4호
• /
• pp.7-28
• /
• 2011

This study intends to investigate the measuring scales, locations and scales through arrangement plans for a research on construction plans. Through an analysis of the artifacts-measuring scales, the relation of two scales found, which further helped suppose the measuring scales applied during the foundation period. Southern dynasties-scale was still used even after the capital was transferred to Sabi till Tang-scale was introduced. Tang-scale was used for Buddhist temples mostly founded in the 7th century. On the other hand, Goguryo-scale seemed to be used almost at the same period as Southern dynasties-scale used, but it seemed that Goguryo-scale disappeared earlier than Southern dynasties-scale. The locations of Buddhist temples could be classified into mountains, flatlands and mountain valley. Buddhist temples founded in mountains were mostly small-sized, but ones located on flatlands could secure flat fields through mounding operations. In addition, through location conditions of Neungsa and Wangheungsa, it was possible to find out the district setting of Sabi Capital Castle. Finally, the expansion range of Buddhist temples were found to be towards the east and the west. As for the scales of temples according to such conditions of location, it was found a similarity in Temple sites. In general, it was possible to assume that the scales of Buddhist temples tended to be expanded along with spatial expansion and there were regular systems in Buddhist temples related to the Royal family. Through the analysis of arrangement plans between individual buildings, it was found that the basic arrangement of Gate-Pagoda-Main Hall-Lecture Hall was preserved, but the proportion of distances between individual buildings varied depending on cases. As a result, there were differences between scales of entire building sites, construction subjective influences and master plan for each location of a Buddhist temple.

• 한국항행학회논문지
• /
• 제12권3호
• /
• pp.215-219
• /
• 2008

최근 물류의 양이 증가함에 따라 컨테이너를 사용한 해상 물동량이 급격히 증가되어 부두에서 처리하여야할 컨테이너 양이 많이 증가되었다. 이에 항만에서의 물류비용 절감을 위해 항만 자동화에 관한 관심이 증대되고 있다. 항만의 자동화는 선박에서 컨테이너를 운반할 트레일러가 통과하는 RFID를 이용한 게이트의 자동화, 정박한 선박에 실려 있는 화물을 취급하는 Quay-Side 컨테이너 크레인(QC)의 자동화, 야드에서 컨테이너를 이적하는 갠트리크레인(GC), 게이트 사이에서 컨테이너를 수송하는 컨테이너 트랜스 포터의 자동화로 크게 분류할 수 있다. 부두의 운용 효율을 증가시키기 위해서는 야드 크레인의 정확한 위치 검출이 상당히 중요한 과제이다. 본 논문에서는 UWB위치인식 시스템을 적용한 야드 크레인의 자동화에 대하여 논의하고 개발방향을 제안한다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권2호
• /
• pp.212-226
• /
• 2014

This paper presents the design and implementation of a pipelined architecture and a method for real-time human detection using depth image from a Time-of-Flight (ToF) camera. In the proposed method, we use Euclidean Distance Transform (EDT) in order to extract human body location, and we then use the 1D, 2D scanning window in order to extract human joint location. The EDT-based human extraction method is robust against noise. In addition, the 1D, 2D scanning window helps extracting human joint locations easily from a distance image. The proposed method is designed using Verilog HDL (Hardware Description Language) as the dedicated hardware architecture based on pipeline architecture. We implement the dedicated hardware architecture on a Xilinx Virtex6 LX750 Field Programmable Gate Arrays (FPGA). The FPGA implementation can run 80 MHz of maximum operating frequency and show over 60fps of processing performance in the QVGA ($320{\times}240$) resolution depth image.