• 소성∙가공
• /
• 제12권2호
• /
• pp.134-140
• /
• 2003

Polymers such as polypropylene or polyethylene offer a unique feature of producing an integral hinge, which can flex over a million times without causing a failure. With such advantage manufacturing, time and cost required at the assembly stage can be eliminated by injecting the whole part as one piece. However, due to increased fluidity resistance at hinges during molding, several defects such as short shot or premature hinge failure can occur with the improper selection of gate locations. Therefore, it is necessary to optimize flow balancer in injection molding of part with hinges before actually producing molds. In this paper, resin flow patterns depending on several gate positions were investigated by numerical analyses of a simple strip part with a hinge. As a result, we found that the properly determined gate location leads to better resin flow and shorter hesitation time. Finally, injection molding tryouts using a mold that was designed one of the proposed gate systems were conducted using polypropylene that contained 20% talc. The experiment showed that hinges without defects could be produced by using the designed gate location.

• 한국기계가공학회지
• /
• 제20권12호
• /
• pp.129-135
• /
• 2021

Injection molding is a manufacturing method of melting the polymer resin and injecting it into a mold to molding it into the desired form. Due to the short molding time and outstanding formability, complex products can be shaped with high precision and it is the most widely used polymer molding method. However, there may be areas that are not filled depending on the location of the injection gate where polymer resin is injected. Formability is determined by deformation and surface precision due to the impact of residual stress after molding. Hence, choosing the location of the injection gate is very important and molding analysis of injection molding is essential to reduce the cost of the mold. This study evaluated the injection formability based on the location of the injection gate of the vertical machining center ATC tool port using injection molding analysis and the results were compared and analyzed. Injection molding analysis was conducted on filling, packing, and deformation according to the location of the gate of the ATC tool port. From each injection gate location, filling time, pressure, and maximum deformation were compared. At gate 2, conditions of molding time and the location of the gate were far superior in production and quality. Gate 2 produced the smallest deformation of 0.779mm with the best quality.

• 한국산학기술학회논문지
• /
• 제16권7호
• /
• pp.4411-4417
• /
• 2015

플라스틱 제품의 사출금형을 위한 게이트 위치의 최적 설계는 다양한 설계에 대한 3차원 사출성형 분석으로 도출할 수 있다. 이 논문은 사출금형에서 게이트 위치의 영향에 관한 연구이다. 게이트 위치는 플라스틱 제품의 생산성과 품질에 결정적인 영향을 미친다. 논문의 목적은 사출기를 사용한 자동차 에어 클리너 상부커버의 제조과정 중에 수지충전, 웰드라인, 사출압력에 대한 게이트의 영향을 분석하기 위한 것이다. 따라서 이 논문에서 이러한 문제들을 분석하기 위한 게이트의 위치는 4가지 경우로 변화를 주었다. 논문에서 각각의 게이트 위치 변화를 고려한 CAE 시뮬레이션은 사출금형공정에서 제품에 나타나는 결함의 원인을 예견하기 위하여 수행되었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.445-446
• /
• 2007

• 한국산학기술학회논문지
• /
• 제15권10호
• /
• pp.5968-5973
• /
• 2014

게이트 위치는 제품 품질 및 생산성 등에 큰 영향을 미치기 때문에 사출성형에 있어서 게이트 위치를 결정하는 것은 대단히 중요하며 이를 위하여 사출성형 CAE가 적용되고 있다. 사출성형 해석의 증가와 3차원 유한요소의 사용은 더 많은 계산 시간을 필요로 하게 되면서, 컴퓨터 자원을 적게 사용하면서도 빠른 시간 내에 게이트 위치 최적화를 수행하는 것은 중요한 이슈가 되었다. 본 논문에서는 유동 균형과 웰드라인을 고려하기 위하여 유동 거리에 기반한 최적화 기법을 제시하였다. 그리고 원판 형상의 모델에 적용하여 웰드라인이 응력집중이 예상되는 슬릿홀을 피하면서도 유동 균형을 유지하는 결과를 도출하였다.

• 한국기계가공학회지
• /
• 제12권4호
• /
• pp.114-122
• /
• 2013

This study introduces an optimization methodology for the determination of gate location that ensures the melt flow balance within a part cavity of injection mold. A new sequential direct-search scheme based on the recursive reduction of the designer-specified gate design area is developed, and it is integrated with a commercial flow simulation tool for optimization. To quantify the level of melt flow balance, we employ the maximum difference among the fill times for the melt fronts to reach the boundary elements of part cavity as objective function. The proposed methodology is successfully applied in the case study of melt flow balancing in molding of a bar code scanner model. The result shows that the melt flow balance at the optimized gate positions is significantly improved from that for the initial gate position.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.787-791
• /
• 1996

In injection molding, location of gates have great influence on the quality of plastic parts. Usually, they are located by releated trial and errors of experienced mold designers. In this topic we will present the numerical algorithm for finding the optimal gate locations. Optimization algorithm is devided into two stages. In the first stage, candidated optimal gate locations can be found by geometry of part only; whereas in the next step, more acculate gate locations are selected byiterative computation with optimization part and analysis part. So from the following study, we suggested the modified flow-volume method, which will define the optimal gate locations in injection mold design.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1349-1350
• /
• 2011

• 한국의사학회지
• /
• 제31권1호
• /
• pp.23-42
• /
• 2018

This study examines the variation in diagrams of the kidney, and the effects on location of the Life Gate as a result. My study analyzes diagrams of kidney form and location, such as appearance, the vertebral spine, ShenXi, and "Life Gate", and also explores the causes for such variations. The kidney is commonly described as having the shape of a bean, which throughout medical history has showed almost no variation. The spine was initially described with a total of 21 vertebrae, and later with a range of 19-25 vertebrae. Regarding the height of kidney in relationship to the spine, it was initially described as beginning at the 14th vertebrae, and later changed to the 15th or 17th vertebrae. However, there have been no changes in the perception of the height of kidney. Initially, the location of the Life Gate could not be identified. Three different suggestions of its location were found throughout historical literature, including: (1) at or within the right kidney; (2) between two kidneys; and (3) between 14th-15th spine. There were also variations noted in the process of copying diagrams of kidney in many books not only because the work of copying was not precise, but also because each medical practitioner had a different interpretation of the kidney's form and function in Traditional Korean and Chinese Medicine. It appears that some practitioners may have been influenced by their understandings of theory of Life Gate.

• 한국주거학회논문집
• /
• 제20권4호
• /
• pp.1-9
• /
• 2009

In this study, an examination and an analysis are carried out on the forms and components of the access spaces of hotel entrances from the front gate of five star hotels in Jejudo, Korea. The results of the study are as follows. In terms of the arrangement of the hotel, city hotels with a relatively narrow site area are influenced by site shape, while resort hotels with a relatively wide site area are affected by the environment. However, the location of the front gate was determined by the access road from the outside. Therefore, forms of access space are related to the front gate, which is governed by the access road, and to the entrance, which is determined by the hotel arrangement. If the front gate is in line with the hotel entrance, a straight line and the hotel are arranged vertically to the front gate(side arrangement) or the hotel is arranged horizontally to the front gate, but if the entrance is not in line with the front gate, it appears as a curved shape. However, those who use their own cars have a variety of choices for access route depending on the location of the parking lot.