• 센서학회지
• /
• 제23권5호
• /
• pp.342-348
• /
• 2014

This paper introduced a novel multi-gas sensor detector with simple signal processing algorithm. This device was evaluated by investigating the characteristics of combustible materials using fire-generated smell and smoke. Plural sensors including TGS821, TGS2442, and TGS260X were equipped to detect carbon monoxide, hydrogen gas, and gaseous air contaminants which exist in cigarette smoke, respectively. Signal processing algorithm based on the difference of response times in fire-generated gases was implemented with early and accurately fire detection from multiple gas sensing signals. All fire experiments were performed in a virtual fire chamber. The cigarette, cotton fiber, hair, polyester fiber, nylon fiber, paper, and bread were used as a combustible material. This analyzing software and sensor controlling algorithm were embedded into 8-bit micro-controller. Also the detected multiple gas sensor signals were simultaneously transferred to the personnel computer. The results showed that the air pollution detecting sensor could be used as an efficient sensor for a fire detector which showed high sensitivity in volatile organic compounds. The proposed detecting algorithm may give more information to us compared to the conventional method for determining a threshold value. A fire detecting device with a multi-sensor is likely to be a practical and commercial technology, which can be used for domestic and office environment as well as has a comparatively low cost and high efficiency compared to the conventional device.

• 설비공학논문집
• /
• 제24권1호
• /
• pp.1-8
• /
• 2012

Recently, the needs of system performances such as working speed and processing accuracy in machine tools have been increased. Especially, the speed increment generates harmful heat at both moving part of the machine tools and handicrafts. The heat is a main drawback to progress accuracy of the processing. Hence, a cooler system to control temperature is inevitable for the machine tools. In general, two representative control schemes, hot-gas bypass and variable speed control of a compressor, have been adopted in the water cooler system. In this paper, comparisons of system performances according to the control schemes in a cooler for machine tools were conducted in detail. Each proportional-integral feedback controller for the two different control systems is designed. The system performances, especially the temperature control accuracy and coefficient of performance which is a criterion of energy saving, were mainly analyzed through various experiments using 1RT water cooler system with different two types of control scheme. These evaluations will provide useful information to choose suitable water cooler system for the engineers who design controllers of the cooler system for machine tools.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2005년도 수소연료전지공동심포지움 2005논문집
• /
• pp.163-168
• /
• 2005

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.213-213
• /
• 2011

DC arc plasmatron is powerful plasma source to apply etching and texturing processing. Even though DC arc plasmatron has many advantages, it is difficult to apply an industry due to the small applied area. To increase an effective processing area, we suggest a DC-RF hybrid plasma system. The DC-RF hybrid plasma system was designed and made. This system consists of a DC arc plasmatron, RF parts, reaction chamber, power feeder, gas control system and vacuum system. To investigate a DC-RF hybrid plasma, we used a Langmuir probe, OES (Optical emission spectroscopy), infrared (IR) light camera. For RF matching, PSIM software was used to simulate a current of an impedance coil. The results of Langmuir probe measurements, we obtain a homogeneous plasma density and electron temperature those are about $1{\times}1010$ #/cm3 and 1~4 eV. The DC-RF hybrid plasma source is applied for plasma etching experimental, and we obtain an etching rate of 10 ${\mu}m$/min. through a 90 mm of reaction chamber diameter.

• 한국수산과학회지
• /
• 제50권6호
• /
• pp.837-840
• /
• 2017

We developed a method to rapidly evaluate the freshness of fish using a sensor gas chromatography (SGC) system. Mackerel Scomber japonicus was stored at $4^{\circ}C$ for 12 days to create an environment similar to the natural decomposition process. Trimethylamine (TMA) content in mackerel muscle was measured at 3-day intervals using a spectrophotometer. The gas-phase concentration of TMA in whole mackerel was also determined using an SGC system. The muscle TMA content increased over time during storage, as did the gas-phase concentration of TMA. Therefore, this study demonstrated that an SGC system can be used to rapidly measure the gas-phase concentration of TMA in fish during processing.

• 한국가스학회지
• /
• 제16권4호
• /
• pp.44-51
• /
• 2012

대부분의 산업시설이 유해물질을 다루고 있기 때문에 산업시설의 사고발생은 막대한 물적, 인적 피해를 발생시키므로 안전관리, 중대형 사고 예방 및 위험 예측 등이 중요시 되고 있다. 특히, 유해물질 누출사고는 누출물질, 저장시설, 대기 상태에 따라 유독가스의 확산 속도와 범위가 달라지므로 이를 모사하는 대기확산 시스템이 이용되어왔다. 모사에 기반하는 대기확산 시스템은 산업시설 구조물 설계 단계에서 주로 사용되며 누출 사고 시 즉각적인 처리와 대응이 어렵다. 실시간 대기정보 데이터를 이용한 연구 및 사례는 존재하지만 시스템의 성능저하 및 전문적 지식의 결여로 신속한 처리 및 대응이 미흡하였다. 본 논문은 에너지 플랜트 환경에서 특수성과 효율성을 강화하여 유해화학물질 누출로 인한 대기확산범위를 즉각적으로 산출하고 누출 시점 및 지점을 지능형 알고리즘으로 결정함으로써 사고예방형 실시간 지능형 대기확산 시스템을 구현한다.

• 천문학회보
• /
• 제45권1호
• /
• pp.33.2-33.2
• /
• 2020

Our HI monster sample is a set of local HI-rich galaxies identified by the ALFALFA survey (Arecibo Legacy Fast Survey ALFA) at z<0.08. Intriguingly, they are also found with a relatively large molecular gas reservoir compared to the galaxies with similar stellar mass and color, yet their star formation rate is quite comparable to normal spirals. This makes our HI monsters good candidates of galaxies in the process of gas accretion which may lead to the stellar mass growth. One feasible explanation for their relatively low star formation activity for a given high cool gas fraction is the gas in monsters being too turbulent to form stars as normal spirals. In order to verify this hypothesis, we probe the molecular gas kinematics of 10 HI monsters which we observed using the Atacama Large Millimeter/sub-millimeter Array (ALMA). We utilize the tilted ring model to investigate what fraction of the molecular gas in the sample is regularly and smoothly rotating. In addition, we model the molecular gas disk using the GALMOD package of the Groningen Image Processing System (GIPSY) and compare with the observations to identify the gas which is offset from the 'co-planar differential rotation'. Based on the results, we discuss the possibility of gas accretion in the sample, and the potential origin of non-regularly rotating gas and the inefficient star formation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권5호
• /
• pp.589-601
• /
• 2014

Natural gas hydrate (NGH) is emerging as a new eco-friendly source of energy to replace fossil fuels in the 21st century. It is well known that the Natural Gas Hydrate contains large amount of natural gas about 170 times as much as its volume and it is easy to be stored and transported safely at about $-20^{\circ}C$ under atmospheric pressure due to so called "self-preservation effect". The option of gas transport by gas hydrate pellets carrier has been investigated and developed in various industry and academy. The natural gas hydrate pellet carrier is on major link in a potential gas hydrate process chain, starting with the extraction of natural gas from the reservoir, followed by the production of hydrate pellets and the transportation to an onshore terminal for further processing or marketing. In recent years, Korean project team supported by Korean Government has been working on the development of NGH total systems including novel NGH carrier since 2011. In order to increase the knowledge on the NGH pellet carrier developed and to understand the major hazards that could have significant impact on the safety of the vessel, this paper presents and evaluates the pros and cons of cargo holds, loading and unloading systems through the analysis of current patent technology. Based on the proven and well-known technologies as well as potential measures to mitigate sintering and minimize mechanical stress on the hydrate pellet in the self-preservation state, this study presents the conceptual and basic design for NGH carrier.

• 한국공작기계학회논문집
• /
• 제17권1호
• /
• pp.1-6
• /
• 2008

There are some methods that have been used to manage a degasing process in recent years, such as an injection method that uses aluminum molten metal powder and chemicals supplier and input method that supplies argon and nitrogen, or chlorine gas by using a gas blow-tube. However, these methods show some problems, and it shows that it is a difficult process to handle, pollution due to producing a lot of toxic gases like chlorine and fluoride gas, irregular effects, and lowering work efficiency due to the excessive processing time. The problems that are the most fatal are the producing a lot of sludge due to the reaction of aluminum molten metal with chemicals, loss of metals, and decreasing the life of refractory materials. In order to solve these problems, this paper develops a technology that is related to aluminum continuous casting molten metal and monolithic degasing apparatus. A degasing apparatus developed in this study improved the existing methods and prevented environmental pollution with smokeless, odorless, and harmlessness by using a new method that applies argon and nitrogen gas in which the methods used in the West and Japan are eliminated. The method developed in this study decreases the molten metal processing and settling time compared to the existing methods and improves the workers' health, safety, and environment because there is no pollution in processes.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.497-498
• /
• 2018

화재 현장은 정전과 연기와 유독가스로 인해 열영상카메라 및 제논탐조등으로도 전방 가시거리 1m를 확보하기 힘든 것이 현실이다. 화재현장의 연기입자를 분석해보면, 파장 $5{\mu}m$ 이하의 흰색 연기일지라도, 가시거리가 1미터 이상이 되면 기존의 열영상 카메라 등을 이용할 경우 전방시야 확보가 어렵다. 입자 파장 $5{\mu}m$ 이상의 검은 연기에는 화학소재와 가스, 물분자가 섞여 있어 단일 센서가 아닌 다양한 센서를 이용한 공간투과 센서 기술이 필요하다. 전방 안전시야 확보를 위해 연기투과 및 공간정보 가시화를 위한 라이다 센싱 기술이 필요하다. 본 논문에서는 32bit CPU코어 및 주변회로를 갖춘 정보처리 시스템의 인터페이스를 설계하였다. 또한 라이다 센서와의 인터페이스를 구현하고 이를 시뮬레이션 하였으며 이를 통해 향후 휴먼 증강 소방헬멧의 정보처리 시스템을 구현 가능한 인터페이스를 제공하였다.