• Food Science and Preservation
• /
• v.19 no.1
• /
• pp.7-11
• /
• 2012

This study was conducted to determine the effects of the humidity and gas composition on the quality of satsuma mandarins during their heat treatment, in an effort to reduce their acidity. To come up with different humidity and gas conditions, various plastic films were used. The fruits were wrapped with an 18-${\mu}m$ high-density polyethylene (HDPE) punched film, a 30-${\mu}m$ low-density polyethylene (LDPE) film, or a 100-${\mu}m$ LDPE film just before treatment at $30^{\circ}C$ for 55 hours. After heat treatment, the titratible acidity (TA) was significantly reduced while the soluble-solid content (SSC) showed no differences, which resulted in increased SSC/TA ratios in all the treatments. The fruits that were not wrapped with a film, however, which had low RH, developed higher ethanol and acetaldehyde contents than those wrapped with an 18-${\mu}m$ HDPE punched film, which had high RH and a similar gas composition. Among the films, the higher the $CO_2$ concentration in the film was, the more the ethanol and acetaldehyde contents increased, which induced more off-flavor. It was thus concluded that high humidity and normal gas composition are favorable conditions for heat treatment to reduce the acidity of satsuma mandarins.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.2
• /
• pp.169-178
• /
• 2014

Samples of Clitoria ternatea L. (Cunh$\tilde{a}$) were harvested at 35, 50, 70, and 90 d after a uniformity harvest in a field study designed as a completely randomized design with a total of 18 experimental plots. The dry matter yield of the whole plant was separated quantitatively into leaves, stems, and pods at each harvesting age. Chemical analyses and in vitro gas production kinetics were performed to assess the quality of the plant parts. Yields, chemical composition, and estimates of gas production parameters were analyzed by fitting a mixed statistical model with two types of covariance structures as follows: variance components and an unrestricted structure with heterogeneous variances. Fast and slow gas yielding pools were detected for both leaves and stems, but only a single pool was detected for pods. The homoscedasticity assumption was more likely for all variables, except for some parameters of the gas production kinetics of leaves and stems. There was no presence of typical pods at 35 and 50 d. In the leaves, the fibrous fractions were affected, whereas the non-fibrous fractions were unaffected by the harvesting age. The harvesting age affected the majority of the chemical constituents and gas kinetic parameters related to the stems. The leaves of this legume were the least affected part by the aging process.

• Journal of Acupuncture Research
• /
• v.28 no.2
• /
• pp.89-95
• /
• 2011

Objectives : The purpose of this study was to investigate the composition of Rehmannia glutinosa's essential oils with Rehmanniae Radix herbal acupuncture Methods : I obtained the essential oils of Rehmannia Radix by hydrodistillation extraction method and supercritical fluid extraction(SFE) method, and then I analyzed those by GC/MS(gas chromatography/mass spectrum). Results : 1. With GC(gas chromatography) and GC/MS(gas chromatography/mass spectrum) analysis. I identified 9 compounds in the Rehmanniae Radix's essential oil obtained through the SFE method. The main compounds were as follows : Hexachloroethane(2.24%), N-Butyl-benzenesulfonamide(2.05%), hexadecanoic acid(1.93%), hexadecanoic acid, ethyl ester(3.49%), 9,12-Octadecadienoic acid(z,z)(2.70%), (9E)-9-Octadecenoic acid(6.14%), ethyl linoleate(4.43%), ethyl oleate(5.80%). 2. I failed to get Rehmanniae Radix's essential oil obtained through the hydrodistillation method. 3. With GC(gas chromatography) and GC/MS(gas chromatography/mass spectrum) analysis. I identified 4 compounds in the Rehmanniae Radix's essential oil obtained through the hydrodistillation method. The main compounds were as follows : Ethylbis(trimethylsilyl)amine(1.04%), 2-(Trimethylsiloxy)benzoic methyl ester(2.65%), Hexadecanoic acid trimethylsilyl ester(12.61%), octadecanoic acid, trimethylsilyl ester(6.28%). Conclusions : The substances by hydrodistillation method may not perfectly match with the substances by supercritical fluid extraction(SFE) method in essential oils extracted form Rehmanniae Radix. But, the main substances was assumed Hexadecanoic acid and octadecanoic acid.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.5
• /
• pp.997-1002
• /
• 1999

The aim of the present study was to investigate effects of food preservative addition and changes in composition of herb extract product on the growth of spoilage yeast, Zygosaccharomyces sp. Herbs such as Panax ginseng, Cinnamomum cassia, Lycium chinense, Zyzyphus juiuba and Jingiber officinale were altogether put into water and essence was extracted at 80oC, and then the extract was concentrated at 75oC. The herb extract product was made by adding vitamins, amino acids and honey to the concentrated herb extract. The amount of gas produced from the herb extract product was increased as inoculated cell number increased but decreased as Brix concentration increased. Gases were produced in small amount when incubation was made at 4oC but large amounts of gases were produced at 25 or 40oC of incubation. The gas production and growth of Zygosaccharomyces sp. were measured after browning reaction was induced by heating at 85oC for 12 hours. It appeared that heating treatment did not induce any significant change in the gas production and growth of the cell. The effects of addition of various sugar to the herb extract produce were also invesigated. Amounts of gas production were in the order of glucose>sucrose>oligosaccharide>stevioside. The viable cell count was measured as 6.0$\times$107 CFU/g when glucose was added to the herb extract product. The viable cell counts were 5.0$\times$106, 3.0$\times$103, and 3.0$\times$102 CFU/g in sucrose, oligosaccharide and stevioside added herb extract product, respectively. The amount of gas production from the herb extract product was remarkably reduced by addition of such food preservatives as sodium benzoate and DF 100. TLC(thin layer chromatography) chromatogram of the herb extract showed stability of the herb extract in the above treatments.

• Journal of ILASS-Korea
• /
• v.20 no.3
• /
• pp.149-155
• /
• 2015

With increasing of GDP, the registration number of passenger cars has exceeded 20 million last year in Korea. Especially, the registration number of the diesel engine vehicles has been increasing. However, the WHO(World Health Organization) IARC (International Agency for Research on Cancer) has reported that diesel engine exhaust gas is an one of HAPs, which has carcinogenic for human, and they have designated it to Group 1. To solve this problem, exhaust gas from diesel engines has to be controlled. Thus, it has been controlling by European regulatory standard in Korea. On the other hand, in order to meet the enhanced emission regulations, all manufacturing company applied $NO_x$ control device to vehicles such as EGR (Exhaust Gas Recirculation), SCR (Selective Catalytic Reduction) and so on. However, these devices (EGR, SCR) were operated by difference reaction mechanism respectively, and the composition of exhaust gas would be differenced from that of them. In this study, it was conducted to evaluate variety characteristics on changing of exhaust gas composition by each $NO_x$ control device, and the heavy duty diesel trucks were chosen as experimental vehicles. From the result, it revealed that vehicles (with EGR) were discharged higher THC as 52.5% than that of others (with SCR). However, it did not followed that trend, in the case of CO; it was discharged as 57.2% lower than that of others (with SCR). In the future, these data would be used to apply to efficient $NO_x$ control device for meeting to EURO 6.

• Journal of the Korean GEO-environmental Society
• /
• v.6 no.4
• /
• pp.27-35
• /
• 2005

A case study of the assessment for environmental stabilization in open dumping landfill site was carried out physical composition, total solid, moisture, and landfill gas(LFG) analysis in landfill site. The result of physical ratio were represented combustibles 23.64% and incombustibles 76.36%, TS 77.69%, VS 74.24%, FS 25.75%. The biodegradable organic matters were almost degraded and the result of the landfill gas showed that the $CH_4$ gas were measured as 4.5%. As the result of the assessment on the open dumping landfill it appears that this landfill is stabled for the maturation phase and formation $CO_2$ concentration lower than 15%.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.5
• /
• pp.9-16
• /
• 2022

Syngas, also known as synthesis gas, synthetic gas, or producer gas, is a combustible gas mixture generated when organic material (biomass) is heated in a gasifier with a limited airflow at a high temperature and elevated pressure. The present research was aimed at modifying the existing LPG engine generator for fully operated syngas. During this study, the designed gasifier-powered woodchip biomass was used for syngas production to generate power. A 6.0 kW LPG engine generator was modified and tested for operation on syngas. In the experiments, syngas and LPG fuels were tested as test fuels. For syngas production, 3 kg of dry woodchips were fed and burnt into the designed downdraft gasifier. The gasifier was connected to a blower coupled with a slider to help the air supply and control the ignition. The convection cooling system was connected to the syngas flow pipe for cooling the hot produce gas and filtering the impurities. For engine modification, a customized T-shaped flexible air/fuel mixture control device was designed for adjusting the correct stoichiometric air-fuel ratio ranging between 1:1.1 and 1.3 to match the combustion needs of the engine. The composition of produced syngas was analyzed using a gas analyzer and its composition was; 13~15 %, 10.2~13 %, 4.1~4.5 %, and 11.9~14.6 % for CO, H₂, CH₄, and CO₂ respectively with a heating value range of 4.12~5.01 MJ/Nm³. The maximum peak power output generated from syngas and LPG was recorded using a clamp-on power meter and found to be 3,689 watts and 5,001 watts, respectively. The results found from the experiment show that the LPG engine generator operated on syngas can be adopted with a de-ration rate of 73.78 % compared to its regular operating fuel.

• Korean Journal of Microbiology
• /
• v.25 no.1
• /
• pp.67-72
• /
• 1987

Cellular fatty acid composition of eight strains, indluding six strains of Comamonas terrigena, and two type strains of Pseudomonas acidovorans, and P. testosteroni was determined by gas-liquid chromatography. Almost the same composition was found in all the strains tested, and hexadecanoic acid, hexadecenoic acid, and octadecenoic acid were accounted more than 70% of total fatty acid. However, P. testosteroni differed from C. terrigena and P. acidovorans by the presence of comparatively large amonuts of 2-hydroxy-hexadecanoic acid, and C. terrigena contained three to eight times as much tetradecanoic acid in P. acidovorans and P. testosteroni. According to the similarity values calculated on the basis of fatty acid composition, C. terrigena strains were divided into three groups differentiated in the requirement of growth factors, and C. terrigena, P. acidovorans, and P. testosteroni strains occupied separate position each other in the dendrogram.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.3
• /
• pp.258-266
• /
• 2000

Experimental investigation and cycle simulation of a capacity modulation of a heat pump system using a hydrofluorocarbon (HFC) refrigerant mixture, R32/134a as an alternative to R22, have been done. In the cycle simulation, the refrigeration system was operated by assigning the temperatures of the external heat transfer fluids with the heat exchangers generalized by an average effective temperature difference. Heating capacity, cooling capacity, and coefficient of performance (COP) of the system were investigated at several operating conditions. Experimental apparatus which had a refrigeration part and a composition changing part was built, and the performance of the heat pump system filled with R32/134a mixture was investigated. A gas-liquid separator was used in the experiment to change the composition by collecting the vapor and the liquid Phase separately, The mass fraction of the charged refrigerant in the heat pump system was 40/60 and 70/30 by weight percentage. The composition of the refrigerant with initial composition of 40/60 varied from 29/71 to 41/59 in the refrigeration cycle. For the refrigerant with initial composition of 70/30, the composition varied from 65/35 to 75/25.

• Fire Science and Engineering
• /
• v.19 no.2 s.58
• /
• pp.69-74
• /
• 2005

A study of the utilization of inert gas generator(IGG) that generates a large amount of inert gas for the fire extinguishing equipment was performed. In this study, the fire extinction performance of gas generated from a 1GG which is implemented to a gas turbine was investigated. A simulated mixture gas of which composition is the same as that of the gas generated from ICG was used in all experiments. First, the extinction concentration was measured using a cup burner method. The extinction design concentration and the volume of extinction space was calculated by applying the obtained extinction concentration to a method recommended by NFPA 2001. In practical respects, the fire extinction performance of IGG-generated gas was confirmed through the fire suppression experiment within a $2m\times2m\times2m$ room.