• East Asian Economic Review
• /
• v.18 no.3
• /
• pp.301-335
• /
• 2014

In this paper, we consider a small open economy under the New Keynesian model with unemployment of Gal$\acute{i}$ (2011a, b) to discuss the design of the monetary policy. Our findings can be summarized in three parts. First, even with the existence of unemployment, the optimal policy is to minimize variance of domestic price inflation, wage inflation, and the output gap when both domestic price and wage are sticky. Second, stabilizing unemployment rate is important in reducing the welfare loss incurred by both technology and labor supply shocks. Therefore, introducing the unemployment rate as an another argument into the Taylor-rule type interest rate rule will be welfare-enhancing. Lastly, controlling CPI inflation is the best option when the policy is not allowed to respond to unemployment rate. Once the unemployment rate is controlled, however, stabilizing power of CPI inflation-based Taylor rule is diminished.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.8
• /
• pp.2501-2507
• /
• 1996

In this paper actively controlled air bearing is investigated to overcome the defects of air bearing such as low stiffness and damping coefficients. The actively controlled air beairng is composed of an air bearing, a gap sensor, a controller, and a piezo actuator. By controlling the position of air bearing with piezo actuator, the position of floating object is controlled. In this study the proportional-Integral-Derivative controller is employed. Active air bearing is investigated numerically and experimentally. There is good agreement between the simulation and the experimental results. It is shown that the stiffness and damping characteristics and positioning experimental results. It is shown that the stiffness and damping characteristics and positioning accuracy of air bearing can be improved by means of adopting actively controlled air bearing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.930-933
• /
• 2000

To understand the behavior of electron, ions and radicals on radio-frequency non-equilibrium plasma, it is necessary to know the basic information about its fundamental properties and reactions. Especially, the transient response of radio-frequency plasma has an important means of controlling selective etch rates and investigating the stability of a plasma chemical process. In this paper, we present the results of periodic steady-state behavior and transient behavior carbon Tetrafluoride(CF$_4$) discharge at 0.2 Torr in a 2 cm gap parallel-plate. After the number densities of charged particles became steady-state, the applied voltage was increased or decreased in an instant and the transient behavior of charged particles and radicals was investigated from one steady-state to the next steady state.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.252.1-252.1
• /
• 2013

Hexagonal boron nitride (h-BN) is a two dimensional material which has high band-gap, flatness and inert properties. This properties are used various applications such as dielectric for electronic device, protective coating and ultra violet emitter so on. 1) In this report, we were growing h-BN sheet directly on sapphire 2"wafer. Ammonia borane (H3BNH3) and nickel were deposited on sapphire wafer by evaporate method. We used nickel film as a sub catalyst to make h-BN sheet growth. 2) During annealing process, ammonia borane moved to sapphire surface through the nickel grain boundary. 3) Synthesized h-BN sheet was confirmed by raman spectroscopy (FWHM: ~30cm-1) and layered structure was defined by cross TEM (~10 layer). Also we controlled number of layer by using of different nickel and ammonia borane thickness. This nickel film supported h-BN growth method may propose fully and directly growing on sapphire. And using deposited ammonia borane and nickel films is scalable and controllable the thickness for h-BN layer number controlling.

• Journal of Powder Materials
• /
• v.26 no.1
• /
• pp.45-48
• /
• 2019

Quantum dots (QDs) are an attractive material for application in solar energy conversion devices because of their unique properties including facile band-gap tuning, a high-absorption coefficient, low-cost processing, and the potential multiple exciton generation effect. Recently, highly efficient quantum dot-sensitized solar cells (QDSCs) have been developed based on CdSe, PbS, CdS, and Cu-In-Se QDs. However, for the commercialization and wide application of these QDSCs, replacing the conventional rigid glass substrates with flexible substrates is required. Here, we demonstrate flexible CISe QDSCs based on vertically aligned $TiO_2$ nanotube (NT) electrodes. The highly uniform $TiO_2$ NT electrodes are prepared by two-step anodic oxidation. Using these flexible photoanodes and semi-transparent Pt counter electrodes, we fabricate the QDSCs and examine their photovoltaic properties. In particular, photovoltaic performances are optimized by controlling the nanostructure of $TiO_2$ NT electrodes.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.3
• /
• pp.180-191
• /
• 2022

In this paper, a single-stage alternating current (AC)-DC converter is proposed for the automated-guided vehicle wireless charging system. The proposed converter is capable of soft-switching under all input voltage (VAC: 220 Vrms ± 10%), load conditions (0-1 kW), and air gap changes (40-60 mm) by phase control at a fixed switching frequency. In addition, controlling a wide output voltage (Vo: 39~54 VDC) is possible by varying the link voltage and improving the input power factor and the total harmonic distortion factor. Experimental results were verified by making a prototype of a 1-kW wireless power charging system that operates with robustness to changes in air gaps.

• Journal of Preventive Medicine and Public Health
• /
• v.45 no.2
• /
• pp.90-97
• /
• 2012

Objectives: While there have been many quantitative studies on the public's attitude towards mental illnesses, it is hard to find quantitative study which focused on the contextual effect on the public's attitude. The purpose of this study was to identify factors that affect the public's beliefs and attitudes including contextual effects. Methods: We analyzed survey on the public's beliefs and attitudes towards mental illness in Korea with multi-level analysis. We analyzed the public's beliefs and attitudes in terms of prejudice as an intermediate outcome and social distance as a final outcome. Then, we focused on the associations of factors, which were individual and regional socioeconomic factors, familiarity, and knowledge based on the comparison of the intermediate and final outcomes. Results: Prejudice was not explained by regional variables but was only correlated with individual factors. Prejudice increased with age and decreased by high education level. However, social distance controlling for prejudice increased in females, in people with a high education level, and in regions with a high education level and a high proportion of the old. Therefore, social distance without controlling for prejudice increased in females, in the elderly, in highly educated people, and in regions with a high education and aged community. Conclusions: The result of the multi-level analysis for the regional variables suggests that social distance for mental illness are not only determined by individual factors but also influenced by the surroundings so that it could be tackled sufficiently with appropriate considering of the relevant regional context with individual characteristics.

• Journal of Korean Library and Information Science Society
• /
• v.6
• /
• pp.159-185
• /
• 1979

The dissemination of scientific information in Society involves interactions among a number of publics and many kinds of information channels. There is a need for examining the the entire process of information dissemination for the solving many problems which scientific many problems which scientific communication is now confronted with, This paper is an attempt to identify the functions of a scientific journal as one of major inf. transfer media, to clarify the problems in performing the functions, and to synthesize various on-going efforts toward the improvement and solution of such problems. Some conclusions derived from this study are as follows; (1) a scientific journal was, is and will be the valuable primary source for the recording and controlling scientific in formation which plays a role as a main energy source in the scientific activities. (2) Traditional built-in delays involved in the communication by a scientific journal should be improved by way of some new methods and techniques such as, of establishing a publishing center, controlling vocabularies in the scientific papers, distributing pre-publication materials, etc. (3) There should be a organized special committe for scientific communication for the assuming the responsibilities of educating, planning and carrying out activities relating to scientific information. (4) To improve the function of a scientific journal as information transfer media, other informal primary media such as report, preprint, etc, and secondary media such as abstracts and indexes should be studied which will result in the clarification of unigue functions, and advantages and disadvantages of each media. as an information dissemination media. (5) Each government should pay attention to the national information system as a changing social system and should recognize the gap in speed between technological development and the change of a social system Technological development should be made a contribution to the improvement of social system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.259-259
• /
• 2010

Periodically polarity inverted (PPI) ZnO structures on (0001) Al2O3 substrates are demonstrated by plasmas assisted molecular beam epitaxy. The patterning and re-growth methods are used to realize the PPI ZnO by employing the polarity controlling method. For the in-situ polarity controlling of ZnO films, Cr-compound buffer layers are used.[1, 2] The region with the CrN intermediate layer and the region with the Cr2O3 and Al2O3 substrate were used to grow the Zn- and O-polar ZnO films, respectively. The growth behaviors with anisotropic properties of PPI ZnO heterostructures are investigated. The periodical polarity inversion is evaluated by contrast images of piezo-response microscopy. Structural and optical interface properties of PPI ZnO are investigated by the transmission electron microcopy (TEM) and micro photoluminescence ($\mu$-PL). The inversion domain boundaries (IDBs) between the Zn and the O-polar ZnO regions were clearly observed by TEM. Moreover, the investigation of spatially resolved local photoluminescence characteristics of PPI ZnO revealed stronger excitonic emission at the interfacial region with the IDBs compared to the Zn-polar or the O-polar ZnO region. The possible mechanisms will be discussed with the consideration of the atomic configuration, carrier life time, and geometrical effects. The successful realization of PPI structures with nanometer scale period indicates the possibility for the application to the photonic band-gap structures or waveguide fabrication. The details of application and results will be discussed.

• Geomechanics and Engineering
• /
• v.29 no.3
• /
• pp.291-300
• /
• 2022

Tunnel boring machines combined with the earth pressure balanced shield method (EPB shield TBMs) have been adopted in urban areas as they allow excavation of tunnels with limited ground deformation through continuous and repetitive excavation and support. Nevertheless, the expansion of TBM construction requires much more minor and exquisitely controlled surface settlement to prevent economic loss. Several parametric studies controlling the tunnel's geometry, ground properties, and TBM operational factors assuming ordinary conditions for EPB shield TBM excavation have been conducted, but the impact of excessive excavation on the induced settlement has not been adequately studied. This study conducted a numerical evaluation of surface settlement induced by the ground loss from face imbalance, excessive excavation, and tail void grouting. The numerical model was constructed using FLAC3D and validated by comparing its result with the field data from literature. Then, parametric studies were conducted by controlling the ground stiffness, face pressure, tail void grouting pressure, and additional volume of muck discharge. As a result, the contribution of these operational factors to the surface settlement appeared differently depending on the ground stiffness. Except for the ground stiffness as the dominant factor, the order of variation of surface settlement was investigated, and the volume of additional muck discharge was found to be the largest, followed by the face pressure and tail void grouting pressure. The results from this study are expected to contribute to the development of settlement prediction models and understanding the surface settlement behavior induced by TBM excavation.