• International Journal of Automotive Technology
• /
• 제7권3호
• /
• pp.369-375
• /
• 2006

This paper describes a simple proportional and integral control algorithm for a swirl motor controller and its application. The control algorithm may be complicated in order to have desired performance, such as low steady state errors, fast response time, and relatively low overshoot. At the same time, it should be compact so that it can be easily implemented on a low cost microcontroller, which has no floating-point calculation capability and low computing speed. These conflicting requirements are fulfilled by the proposed control algorithm which consists of a gain scheduling proportional controller and an anti-windup integral controller. The mechanical friction, which is caused by gears and a return spring, varies very nonlinearly according to the angular position of the system. This nonlinear static friction is overcome by the proportional controller, which has a two-dimensional look up gain table. It has error axis and angular position axis. The integral controller is designed not only to minimize the steady state error but also to avoid the windup effect, which may be caused by the saturation of a motor driver. The proposed control algorithm is verified by use of a commercial product to prove the feasibility of the algorithm.

• 제어로봇시스템학회논문지
• /
• 제16권6호
• /
• pp.592-600
• /
• 2010

The problem of motion control for AUV (Autonomous Underwater Vehicles) is addressed. The utilization of such robotic vehicles has gained an increasing importance in many marine activities. In this paper the objective is to describe how to design and apply FGS (Fuzzy Gain Scheduling) PD (Proportional Derivative) controller for an AUV (Autonomous Underwater Vehicle) to control the yaw and depth of the vehicle by keeping the path of the navigation to a desired point, and/or changing the path according to a set point.

• 한국통신학회논문지
• /
• 제33권2A호
• /
• pp.191-197
• /
• 2008

시변 무선채널에서 버스트한 패킷을 효율적으로 전송하기 위해서는 다중사용자 다이버시티 이득을 극대화할 수 있는 opportunistic 스케줄링 기법이 중요한 기술적 요소가 되고 있다. 본 논문에서는 무선 LAN 네트워크에 적용 가능한 분산화된 opportunistic 스케줄링기법을 제안하였다. Opportunistic 스케줄링방식의 하나인 비례공정 알고리즘은 중앙집중형 네트워크에 적용되었으나 본 논문에서는 확률적 방식을 이용하여 분산화된 방식의 비례공정 스케줄링 (DPFS: Distributed Proportional Fair Scheduling) 방식과 매체 접근제어 방식을 설계하였다. 제안한 DPFS방식에서는 각각의 수신기들은 채널상태를 파악한 후 독립적으로 자신의 우선순위를 확률적 방법으로 계산하기 때문에 모든 수신기의 채널 정보를 수집하는데 필요한 오버헤드를 크게 줄일 수 있다. 성능분석을 위하여 시뮬레이션을 수행하였으며 제안된 스케줄링 방식이 기존의 분산 스케줄링방식에 비하여 전송률 성능에서 우수함을 보이고 있으며 관련 파라미터를 조절함으로써 공평성과 전송률성능에 대한 제어가 가능함을 보이고 있다.

• 한국추진공학회지
• /
• 제20권1호
• /
• pp.28-36
• /
• 2016

본 논문에서는 핀틀을 이용한 가변추력 고체 추진기관의 추력을 제어하기 위하여 이론적으로 모델을 구하고 압력 제어기를 설계하였다. 고전적인 모델 선형화 및 비례-적분제어를 설계했을 때 실제 모델의 비선형성에 의해 발생하는 제어기 성능 저하를 줄이기 위해 이득 계획 기법을 적용하였다. 시스템의 특징을 고려하여 연소관 내부 체적 변화에 따라 이득을 조절하는 방법과, 연소관 내부 압력에 의해 이득을 조절하는 방법으로 두종류의 이득 계획 제어기를 설계하였다. 각 제어기를 가변 추력기 모델에 적용하여 폐루프 시스템 응답특성을 비교하였으며 가변 추력 추진기관 특성에 따라서 어떤 제어기를 선택하는 것이 유리한지 제안하였다.

• 한국생산제조학회지
• /
• 제23권3호
• /
• pp.318-324
• /
• 2014

Recent years have witnessed a growing demand for a wide variety of high-performance industrial robots. In this paper, for accurate gain tuning of a 6-axis articulated industrial robot with reduced noise, a program routine for a dynamic signal analyzer (DSA) using the frequency response method will be programmed using $LabVIEW^{(R)}$. Then, robot transfer functions can be obtained experimentally using the frequency response method with the DSA program. Data from the robot transfer functions are transformed into Bode plots, based on which an optimal gain tuning will be executed. Gain tuning can enhance the response quality of the output signal for a given input signal during real-time control of the robot. The effectiveness of our proposed technique will be verified by implementation with a (lab-manufactured) 6-axis articulated industrial robot (hereinafter called "RS2") and comparison with the zero position gain tuning, as well as other positions.

• 대한조선학회논문집
• /
• 제54권2호
• /
• pp.102-112
• /
• 2017

Many studies on dynamic positioning control algorithms using fixed feedback gains have been carried out to improve station keeping performance of dynamically positioned vessels. However, the control algorithms have disadvantages in that it can not cope with changes in environmental disturbances and response characteristics of vessels motion in real time. In this paper, the Fuzzy Gain Scheduling - PID(FGS - PID) control algorithm that can tune PID gains in real time was proposed. The FGS - PID controller that consists of fuzzy system and a PID controller uses weighted values of PID gains from fuzzy system and fixed PID gains from Ziegler - Nichols method to tune final PID gains in real time. Firstly, FGS - PID controller, control allocation algorithm, FPSO and environmental disturbances were modeled using Matlab/Simulink to evaluate station keeping performance of the proposed control algorithm. In addition, simulations that keep positions and a heading angle of vessel with wind, wave, current disturbances were carried out. From simulation results, the FGS - PID controller was confirmed to have better performances of keeping positions and a heading angle and consuming power than those of the PID controller. As a consequence, the proposed FGS - PID controller in this paper was validated to have more effectiveness to keep position and heading angle than that of PID controller.

• 한국항해항만학회지
• /
• 제47권4호
• /
• pp.256-270
• /
• 2023

본 연구에서는 선박 또는 해양구조물에 설치되는 터렛(Turret)과 같이 제어 대상의 무게 중심 주변이 아닌 임의 지점을 운동 중심으로 선정하여 제어할 수 있는 동적위치유지(Dynamic positioning; DP)용 슬라이딩모드(Sliding mode) 제어기를 연구하였다. 이러한 슬라이딩모드 제어기는 선박 및 해양구조물 동역학 모델의 불확실성, 시공간에서 변화하는 미지의 해양환경에 의한 외력, DP 제어시스템의 과도 성능을 고려한 제어가 가능하다. 선박 및 해양구조물의 임의 지점을 기준으로 제어하기 위해 제어 대상의 기구학 방정식에 포함되는 자코비안(Jacobian) 행렬을 수정하여 슬라이딩모드 제어기를 설계하였다. 제어기의 강건성(Robustness)을 확보하기 위해 슬라이딩모드 제어기 설계에 리아프노프(Lyapunov) 안정도 판별 이론을 적용하였다. 일반적으로 DP 제어에서 제어기의 강건성 확보를 위해 PD(Proportional derivative) 제어 알고리즘 기반의 이득 스케줄링(Gain scheduling)을 사용한다. 그러나 이득 스케줄링을 적용하기 위한 적절한 이득을 찾는 것은 DP 시스템 적용을 복잡하게 만든다. 따라서 본 연구에서는 이러한 선박 및 해양구조물 DP 제어기의 복잡성을 해소하기 위해 슬라이딩모드 제어 알고리즘을 고려하였다. 제안된 슬라이딩모드 제어 알고리즘의 유효성을 검증하기 위해 시간 영역 시뮬레이션을 구현하였으며, 제어 알고리즘의 성능평가에 활용되었다. 제안된 슬라이딩모드 제어기의 유효성 검토를 위해 일반적인 PD 제어 알고리즘을 적용한 DP 제어 시뮬레이션 결과와 비교하였다.

• 제어로봇시스템학회논문지
• /
• 제13권5호
• /
• pp.414-421
• /
• 2007

This paper presents a engine/brake integrated VDC(Vehicle Dynamic Control) system using neural network algorithm methods for wheel slip and yaw rate control. For stable performance of vehicle, not only is the lateral motion control(wheel slip control) important but the yaw motion control of the vehicle is crucial. The proposed NNPI(Neural Network Proportional-Integral) controller operates at throttle angle to improve the performance of wheel slip. Also, the suggested NNPID controller performs at brake system to improve steering performance. The proposed controller consists of multi-hidden layer neural network structure and PID control strategy for self-learning of gain scheduling. Computer Simulation have been performed to verify the proposed neural network based control scheme of 17 dof vehicle dynamic model which is implemented in MATLAB Simulink.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.205-209
• /
• 1998

A synthesis of fuzzy variable structure control is proposed to design a high-angle-of-attack flight system for a modification version of the F-18 aircraft. The knowledge of the proportional, integral, and derivative control is combined into the fuzzy control that addresses both the highly nonlinear aerodynamic characteristics of elevators and the control limit of thrust vectoring nozzles. A simple gain scheduling method with multi-layered fuzzy rules is adopted to obtain an appropriate blend of elevator and thrust vectoring commands in the wide operating range. Improving the computational efficiency, an accelerated kernel for on-line fuzzy reasoning is also proposed. The resulting control system achieves the good flying quantities during a high-angle-of- attack excursion. Thus the fuzzy logic can afford the control engineer a flexible means of deriving effective control laws in the nonlinear flight regime.

• 한국정밀공학회지
• /
• 제30권8호
• /
• pp.831-838
• /
• 2013

This paper focused on the design of an efficient temperature controller for a plant with a wide range of operating temperatures. The greater the temperature difference a plant has, the larger the nonlinearity it is exposed to in terms of heat transfer. For this reason, we divided the temperature range into five sections, and each was modeled using ARMAX(auto regressive moving average exogenous). The movement of the dominant poles of the sliced system was analyzed and, based on the variation in the system parameters with temperature, optimal control parameters were obtained through simulation and experiments. From the configurations for each section of the temperature range, a temperature-based gain-scheduled controller (TBGSC) was designed for parameter variation of the plant. Experiments showed that the TBGSC resulted in improved performance compared with an existing proportional integral derivative (PID) controller.