• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.4
• /
• pp.607-612
• /
• 1994

The static and dynamic model of IGBT for the SPICE simulation has been successfully developed. The various circuit model parameters are extracted from the I-V and C-V characteristics of IGBT and implemented into our model. The static model of IGBT consists of the MOSFET, bipolar transistor and series resistance. The parameters to be extracted are the threshold voltage of MOSFET, current gain $\beta$ of bipolar transistor, and the series resistance. They can be extracted from the measured I-V characteristics curve. The C-V characteristics between the terminals are very important parameters to determine the turn-on and turn-off waveform. Especially, voltage dependent capacitance are polynomially approximated to obtain the exact turn-on and turn-off waveforms. The SPICE simulation results employing new model agree well with the experimental values.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.4
• /
• pp.154-160
• /
• 2003

The switched reluctance motor(SRM) has a considerable potential for industrial applications because of its high reliability as a result of the absence of rotor windings. In some applications with SRM, a parallel switching strategy is often used for cost saving, increasing of current capacity and system reliability. This paper proposes a new parallel switching strategy of SRM using parallel winding. While conventional parallel switching devices are connected in a phase winding, power devices are connected in the parallel windings wound in each pole of stator in the proposed method. Paralleling strategy for current sharing in the proposed method can be easily determined without considerations of any nonlinear characteristics of power devices such as conduction resistance, threshold voltage and gain factor. The proposed paralleling strategy is verified by the mathematical analysis and experimental results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.65-70
• /
• 2001

This paper presents a Receiver MMIC for the CDMA terminal. The complete circuit is composed of Low Noise Amplifier, Down Conversion Mixer, Intermediate Frequency Amplifier and Bias circuit. The Bias circuit implementation, which allows for compensation for threshold voltage and power supply voltage variation are provided. The proposed topology has high linearity and low noise characteristics. Results of the designed circuit are as follows: Overall conversion gain is 28.5 dB, input IP3 of LNA is 8 dBm, input IP3 of down conversion mixer is 0 dBm and total DC current consumption is 22.1 mA.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.4
• /
• pp.154-154
• /
• 2003

The switched reluctance motor(SRM) has a considerable potential for industrial applications because of its high reliability as a result of the absence of rotor windings. In some applications with SRM, a parallel switching strategy is often used for cost saving, increasing of current capacity and system reliability. This paper proposes a new parallel switching strategy of SRM using parallel winding. While conventional parallel switching devices are connected in a phase winding, power devices are connected in the parallel windings wound in each pole of stator in the proposed method. Paralleling strategy for current sharing in the proposed method can be easily determined without considerations of any nonlinear characteristics of power devices such as conduction resistance, threshold voltage and gain factor. The proposed paralleling strategy is verified by the mathematical analysis and experimental results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1480-1485
• /
• 2017

A conventional max SNR scheme, which allocates uplink resources to the user with the highest gain of desired signal channel with a serving base station (BS), exhibits excellent performance in low interference environments. On the other hand, max SGIR scheme, which allocates resources by considering both the desired signal chanel gain and users' interference generating to neighboring BSs, outperforms the max SNR in high interference environments. The conventional two scheduling schemes exhibit optimal performance in different interference environments. Thus, we propose an adaptive scheduling scheme in order to overcome disadvantages of the conventional schemes. In the proposed scheme, a user is selected by max SNR and then the user's generating interference is compared with a pre-determined threshold value. If the generating interference is larger than a pre-determined threshold, then a user is re-selected by max SGIR policy. Monte-Carlo simulation results reveals that the proposed scheme outperforms the conventional schemes in various interference environments.

• Journal of Korean Library and Information Science Society
• /
• v.52 no.1
• /
• pp.79-108
• /
• 2021

Information retrieval in the health field has several challenges. Health information terminology is difficult for consumers (laypeople) to understand. Formulating a query with professional terms is not easy for consumers because health-related terms are more familiar to health professionals. If health terms related to a query are automatically added, it would help consumers to find relevant information. The proposed query expansion (QE) models show how to expand a query using MeSH terms. The documents were represented by MeSH terms (i.e. Bag-of-MeSH), found in the full-text articles. And then the MeSH terms were used to generate LDA (Latent Dirichlet Analysis) topic models. A query and the top k retrieved documents were used to find MeSH terms as topic words related to the query. LDA topic words were filtered by threshold values of topic probability (TP) and word probability (WP). Threshold values were effective in an LDA model with a specific number of topics to increase IR performance in terms of infAP (inferred Average Precision) and infNDCG (inferred Normalized Discounted Cumulative Gain), which are common IR metrics for large data collections with incomplete judgments. The top k words were chosen by the word score based on (TP *WP) and retrieved document ranking in an LDA model with specific thresholds. The QE model with specific thresholds for TP and WP showed improved mean infAP and infNDCG scores in an LDA model, comparing with the baseline result.

• Toxicological Research
• /
• v.11 no.1
• /
• pp.9-14
• /
• 1995

The immune system is partially under the control of the sympathetic and parasymphathetic nervous systems through the regulatory feedback loop. Methamphetamine (MA) is a neurotoxic chemical which affects the neurotransmitter system. The objective of this study was to investigate the immunotoxic effect of MA on the major immune target organ and lymphocyte proliferation to the various mitogens. Female Balb/C mice, 15 to 20 g, were injected subcutaneously with 0, 0.5, or 5 mg MA/kg for 14 consecutive days. In MA treated mice, the body weight gain and relative spleen and thymus weight were decreased in doserelated manner. Histopathologically, there was a paucity of lymphold follicles and germinal centers in the spleen, and thymic cortical atrophy with lymphophagocytosis was prominent. Apoptosis also occurred in germinal centers of spleen and thymic cortex. The threshold and peak of lymphocyte proliferation at various concentration of mitogens showed similar patterns. However, the response to lipopolysaccaride (LPS) and pokeweed mitogen (PWM) in the 5 mg MA/kg treated group showed threshold and peak proliferation at high concentration of mitogens (25${\mu}g$ LPS/ml for MA vs 15${\mu}g$ LPS/ml for control; 60${\mu}g$ PWM/ml for MA vs 45${\mu}g$ PWM/ml for control), which suggest that MA impairs T cell dependent-B cell function. This preliminary study indicated that MA affected the lymphold organs and immune function.

• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.585-592
• /
• 2017

Recently, as the air traffic volume has been explosively increased, various studies are being conducted to increase the air passenger capacity. In order to compensate the limitation of the separation distance on the aerodrome established on the basis of existing VOR / DME equipment, GNSS utilizing satellite is considered. In addition, we are trying to obtain more precise location information by using SBAS, a system that can correct GNSS error. ICAO recommends introducing SBAS until 2025, and Korea has also started to develop KASS, a Korean SBAS since 2014. Therefore, in this paper, we analyze the interference threshold for the measurement items and the receiving antenna gain according to the elevation angle of the satellite receiving antenna.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.586-592
• /
• 2014

In this paper, high efficiency power management IC(PMIC) with DT-CMOS(Dynamic threshold voltage Complementary MOSFET) switching device is presented. PMIC is controlled PWM control method in order to have high power efficiency at high current level. The DT-CMOS switch with low on-resistance is designed to decrease conduction loss. The control parts in Buck converter, that is, PWM control circuit consist of a saw-tooth generator, a band-gap reference(BGR) circuit, an error amplifier, comparator circuit, compensation circuit, and control block. The saw-tooth generator is made to have 1.2MHz oscillation frequency and full range of output swing from supply voltage(3.3V) to ground. The comparator is designed with two stage OP amplifier. And the error amplifier has 70dB DC gain and $64^{\circ}$ phase margin. DC-DC converter, based on current mode PWM control circuits and low on-resistance switching device, achieved the high efficiency nearly 96% at 100mA output current. And Buck converter is designed along LDO in standby mode which fewer than 1mA for high efficiency. Also, this paper proposes two protection circuit in order to ensure the reliability.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.154-154
• /
• 2012

Flexible complementary inverters based on thin-film transistors (TFTs) are important because they have low power consumption and high voltage gain compared to single type circuits. We have manufactured flexible complementary inverters using pentacene and amorphous indium gallium zinc oxide (IGZO) for the p-channel and n-channel, respectively. The circuits were fabricated on polyimide (PI) substrate. Firstly, a thin poly-4-vinyl phenol (PVP) layer was spin coated on PI substrate to make a smooth surface with rms surface roughness of 0.3 nm, which was required to grow high quality IGZO layers. Then, Ni gate electrode was deposited on the PVP layer by e-beam evaporator. 400-nm-thick PVP and 20-nm-thick ALD Al2O3 dielectric was deposited in sequence as a double gate dielectric layer for high flexibility and low leakage current. Then, IGZO and pentacene semiconductor layers were deposited by rf sputter and thermal evaporator, respectively, using shadow masks. Finally, Al and Au source/drain electrodes of 70 nm were respectively deposited on each semiconductor layer using shadow masks by thermal evaporator. The characteristics of TFTs and inverters were evaluated at different bending radii. The applied strain led to change in voltage transfer characteristics of complementary inverters as well as source-drain saturation current, field effect mobility and threshold voltage of TFTs. The switching threshold voltage of fabricated inverters was decreased with increasing bending radius, which is related to change in parameters of TFTs. Throughout the bending experiments, relationship between circuit performance and TFT characteristics under mechanical deformation could be elucidated.