• 한국재료학회지
• /
• 제23권3호
• /
• pp.161-167
• /
• 2013

The ZnO thin films were grown on GaN template substrates by RF magnetron sputtering at different RF powers and n-ZnO/p-GaN heterojunction LEDs were fabricated to investigate the effect of the RF power on the characteristics of the n-ZnO/p-GaN LEDs. For the growth of the ZnO thin films, the substrate temperature was kept constant at $200^{\circ}C$ and the RF power was varied within the range of 200 to 500W at different growth times to deposit films of 100 nm thick. The electrical, optical and structural properties of ZnO thin films were investigated by ellipsometry, X-ray diffraction (XRD), atomic force microscopy (AFM), photoluminescence (PL) and by assessing the Hall effect. The characteristics of the n-ZnO/p-GaN LEDs were evaluated by current-voltage (I-V) and electroluminescence (EL) measurements. ZnO thin films were grown with a preferred c-axis orientation along the (0002) plane. The XRD peaks shifted to low angles and the surface roughness became non-uniform with an increase in the RF power. Also, the PL emission peak was red-shifted. The carrier density and the mobility decreased with the RF power. For the n-ZnO/p-GaN LED, the forward current at 20 V decreased and the threshold voltage increased with the RF power. The EL emission peak was observed at approximately 435 nm and the luminescence intensity decreased. Consequently, the crystallinity of the ZnO thin films grown with RF sputtering powers were improved. However, excess Zn affected the structural, electrical and optical properties of the ZnO thin films when the optimal RF power was exceeded. This excess RF power will degrade the characteristics of light emitting devices.

• 한국광학회지
• /
• 제14권2호
• /
• pp.184-188
• /
• 2003

TM 모드에는 영향을 끼치지 않으면서 TE 모드의 위상만을 변조시키는 P-I-i-I-N $GaAs/Al_{0.35}Ga_{0.65}As$ 도파로 위상변조기를 제작하였다. TE 모드에 대해서만 위상변조를 일으키게 하기 위해 P-I-i-I-N 구조를 선택하였다. Fabry-Perot 공명 방법을 이용해서 TE-와 TM 모드에 대해 $\lambda=1.55$\mu\textrm{m}$ 파종에서 각각 측정하였다. TE-편광된 빛에 대한 위상변조 효율은 $\Delta\phi=7.9^{\circ}/V.mm$ 였다. 이것은 비슷한 구조를 갖는 위상변조기의 변조 효율 보다 거의 2.5배정도 향상된 결과이다. 또한, TM-편광된 빛에 대해 서는 위상변조가 관측되지 않았다.

• 한국재료학회지
• /
• 제4권5호
• /
• pp.600-607
• /
• 1994

LPE방법을 이용하여 InP기판 상에 GaAs이종접합 박막을 최초로 성장하였으며 제반 성장조건들이 박막특성에 미치는 영향을 NDIC광학현미경, SEM, TEM 및 DCXRD 등을 이용하여 조사하였다. 적정 LPE성장온도는 $720^{\circ}C$(냉각속도 $0.5^{\circ}C$/min.)이었으며 성장된 GaAs 박막의 표면형상은 융액 균질화 처리 시 기판을 InP cover웨이퍼로 보호한 경우가 In/InP 융액으로 보호한 경우에 비해 현저히 개선되었다. 박막 성장 시 Ga성장융액 내에 0.005wt% 정도의 Se을 첨가함으로서 기판의 열융해(meltback)현상이 억제되었고 박막의 표면 거칠기도 현저히 개선되었다. 미세 격자가 식각된 InP기판 상에 성장된 GaAs 박막의 DCXRD측정결과 미세 격자 패턴이 없는 기판 위에 성장된 시료보다 결정성이 더욱 향상되었으며 이는 TEM 관찰결과 GaAs/InP계면에서 생성된 전위들 중 일부가 상호반응에 의하여 미세격자 영역 내에 국한되기 때문으로 판단되었다.

• 한국재료학회지
• /
• 제18권8호
• /
• pp.444-449
• /
• 2008

Samples of GaMnAs, GaMnAs codoped with Be, and GaMnAs simultaneously codoped with Be and Mg were grown via low-temperature molecular beam epitaxy (LT-MBE). Be codoping is shown to take the Ga sites into the lattice efficiently and to increase the conductivity of GaMnAs. Additionally, it shifts the semiconducting behavior of GaMnAs to metallic while the Mn concentration in the GaMnAs solid solution is reduced. However, with simultaneous codoping of GaMnAs with Be and Mg, the Mn concentration increases dramatically several times over that in a GaMnAs sample alone. Mg and Be are shown to eject Mn from the Ga sites to form MnAs and MnGa precipitates.

• Current Photovoltaic Research
• /
• 제4권3호
• /
• pp.108-113
• /
• 2016

III-V compound semiconductor based thin film solar cells promise relatively higher power conversion efficiencies and better device reliability. In general, the thin film III-V solar cells are fabricated by an epitaxial lift-off process, which requires an $Al_xGa_{1-x}As$ ($x{\geq}0.8$) sacrificial layer and an inverted solar cell structure. However, the device performance of the inversely grown solar cell could be degraded due to the different internal diffusion conditions. In this study, InGaP/GaAs double-junction solar cells are inversely grown by MOCVD on GaAs (100) substrates. The thickness of the GaAs base layer is reduced to minimize the thermal budget during the growth. A wide band gap p-AlGaAs/n-InGaP tunnel junction structure is employed to connect the two subcells with minimal electrical loss. The solar cell structures are transferred on to thin metal films formed by Au electroplating. An AlAs layer with a thickness of 20 nm is used as a sacrificial layer, which is removed by a HF:Acetone (1:1) solution during the epitaxial lift-off process. As a result, the flexible InGaP/GaAs solar cell was fabricated successfully with an efficiency of 27.79% under AM1.5G illumination. The efficiency was kept at almost the same value after bending tests of 1,000 cycles with a radius of curvature of 10 mm.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.205-205
• /
• 2013

테라헤르쯔(terahertz: THz)파는 0.1~10 THz 의 범위로 적외선과 방송파 사이에 광대역 주파수 스펙트럼을 차지하고 있으며 직진성, 투과성, 그리고 낮은 에너지 (meV)를 가지고 있어 비 파괴적이고 무해한 장점을 지니고 있다. Ti:sapphire laser와 같은 femto-pulse source 등이 많은 발전이 되어 현재 많은 연구와 발전이 이루어지고 있다. femto-pulse source를 이용한 THz 응용에서는 높은 저항, 큰 전자 이동도, 그리고 아주 짧은 전하수명의 기판을 요구하는데 저온에서 성장한 (low-temperature grown : LT) GaAs는 격자 내에 Gallium 자리에 Arsenic이 치환 하면서 AsGa antisite가 발생하여 전하수명을 짧아지는 것을 응용하여 가장 많이 이용되고 있다. 현재 THz 응용분야에서 보다 작고 가격경쟁력이 있는 광통신을 이용한 THz photomixer등이 활발히 연구 하고 있다. 광섬유 내에서 손실과 분산이 최소값을 가지는 부분이 1.55 ${\mu}m$ 부근이고 In0.53Ga0.47As 기판을 이용하였을 때 여기에 완벽하게 만족하게 된다. 하지만 LT-InGaAs 의 경우 AsGa antisite로 인하여 carrier lifetime은 짧아지지만 높은 n-type 전하밀도를 가지게 된다. 이때 Be을 doping하여 전하밀도를 보상하여 높은 저항을 유지해야 하는데 Be의 활성화를 위해서는 열처리를 필요로 한다. 하지만 열처리를 하면 carrier lifetime이 길어지기 때문에 carrier lifetime과 저항을 적절히 조율해야 한다. 이는 물질자체의 특성이기 때문에 InGaAs는 GaAs보다 낮은 amplitude와 짧은 cut-off frequency를 가진다. 본 연구에서는 보다 높은 저항을 얻기 위하여 molecular beam epitaxy를 이용하여 semi-insulating InP:Fe 기판위에 격자 정합된 InGaAs:Be/InAlAs multi quantum well (MQW)를 온도별 ($250{\sim}400^{\circ}C$), 주기별 (50~150)로 성장을 하였고 이때 InGaAs layer의 Be doping level은 $2{\times}1018\;cm^{-3}$, Ex-situ annealing은 $550^{\circ}C$에서 10분으로 고정 하였다. THz 발생 실험에서는 InGaAs/InAlAs MQW은 4000 pA로 1,000 pA를 가지는 InGaAs epilayer보다 4배 높은 전류 신호를 얻을 수 있었고 모든 샘플이 2 THz에서 cut-off frequency를 가지고 있었다. THz 검출 실험에서는 LT-InGaAs:Be epilayer LT-InGaAs:Be/InAlAs, HT-InGaAs/InAlAs 샘플이 각각 180, 9000, 12000 pA의 전류신호를 가지고 있었고 모든 샘플이 2 THz에서 cut-off frequency를 가지고 있었다. HT-InGaAs/InAlAs MQW를 이용한 검출실험에서는 InGaAs layer가 defect free이지만 LT-InGaAs:Be/ InAlAs MQW 보다 높은 전류 신호를 얻을 수 있었다. 이는 InAlAs layer가 저항만 높이는 것뿐만 아니라 carrier trapping layer로써의 역할도 하는 것으로 사료된다.

• Journal of Pharmaceutical Investigation
• /
• 제40권6호
• /
• pp.363-366
• /
• 2010

Identification of compounds that function as P-glycoprotein (P-gp) substrates or inhibitors can facilitate the selection and optimization of new drug candidates. The purpose of this study is to optimize the experimental conditions for in vitro P-gp assay using LLC-GA5 cells, which is a well-known transformant cell line derived by transfecting LLC-PK1 with human MDR1. The amount of rhodamine123 transported by the LLC-GA5 and LLC-PK1 cells was evaluated under the following experimental conditions: 3 different types of transport media, colchicine pretreatment or nontreatment of the cells in the culture media, and with and without poly-L-lysine coating of the culture plates. The assay sensitivity was found to considerably differ depending on the diluents used in the transport media. P-gp-mediated transport in LLC-GA5 cells was most clearly characterized in the Hanks' balanced salt solution based transport media. The sensitivity of P-gp-mediated transport was not changed by colchicine pretreatment or poly-L-lysine coating of the culture plates.

• Journal of Animal Science and Technology
• /
• 제62권1호
• /
• pp.1-13
• /
• 2020

This study was designed to evaluate the in vitro and in vivo effects of reductive acetogens isolated from ruminants on methane mitigation, and milk performance, respectively. Four acetogens, Proteiniphilum acetatigenes DA02, P. acetatigenes GA01, Alkaliphilus crotonatoxidans GA02, and P. acetatigenes GA03 strains were isolated from ruminants and used in in vitro experiment. A control (without acetogen) and a positive group (with Eubacterium limosum ATCC 8486) were also included in in vitro experiment. Based on higher acetate as well as lower methane producing ability in in vitro trial, P. acetatigenes GA03 was used as inoculum for in vivo experiment. Holstein dairy cows (n = 14) were divided into two groups viz. control (without) and GA03 group (diet supplied with P. acetatigenes GA03 at a feed rate of 1% supplementation). Milk performance and blood parameters were checked for both groups. In in vitro, the total volatile fatty acids and acetate production were higher (p < 0.05) in all 4 isolated acetogens than the control and positive treatment. Also, all acetogens significantly lowered (p < 0.05) methane production in comparison to positive and control groups however, GA03 had the lowest (p < 0.05) methane production among 4 isolates. In in vivo, the rate of milk yield reduction was higher (p < 0.05) in the control than GA03 treated group (5.07 vs 2.4 kg). Similarly, the decrease in milk fat was also higher in control (0.14% vs 0.09%) than treatment. The somatic cell counts (SCC; ×10³/mL) was decreased from 128.43 to 107.00 in acetogen treated group however, increased in control from 138.14 to 395.71. In addition, GA03 increased blood glucose and decreased non-esterified fatty acids. Our results suggest that the isolated acetogens have the potential for in vitro methane reduction and P. acetatigenes GA03 strain could be a candidate probiotic strain for improving milk yield and milk fat in lactating cows with lowering SCCs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.477-480
• /
• 1999

III-V족 화합물 반도체인 p-CaP의 자연산화막윽 30% $H_2O$$_2$용액 내에서 화학적인 이온반응을 통한 전기분해의 원리를 이용한 양극산화방법으로 형성하여 그 성장률과 광학적성질을 조사하였다. GaP자연산화막의 형성은 산소의 확산과정으로 이루어지며, 양측산화 막의 두께는 산화시간과 인가전압에 대하 여 선형적으로 비례하여 증가하였다. 자연산화막의 표면은 전자현미경으로 산화막의 두게는 파장이 6328$\AA$인 Ellipsometer를 사용하여 측정하였다. 광학적 성질은 적외선 영역에서의 광흡수 특성은 퓨리에 적외선 분광기로 측정하였으며 XRD 로 전압과 시간에 따른 산화막에 조성과 결정면을 알아보았다. 산화막의 형성방법과 형성조건에 따른 GaP 자연산화막의 절연막으로 이용하여 산화막에 조성에 따른 MOS 다이오드로서의 이용 가능성을 조사하였다.

• 반도체디스플레이기술학회지
• /
• 제11권2호
• /
• pp.53-57
• /
• 2012

This paper is for accurately simulating the breakdown of MHEMTs with an InP-etchstop layer. 2D-Hydrodynamic simulation parameters are investigated and calibrated for the InP-epitaxy layer. With these calibrated parameters, simulations are performed and analyzed for the breakdown of devices with an InP-etchstop layer. In the paper, the impact-ionization coefficients, the mobility degradation due to doping concentration, and the saturation velocity for InP-epitaxy layer are newly calibrated for more accurate breakdown simulation.