• 한국재료학회지
• /
• 제30권3호
• /
• pp.131-135
• /
• 2020

Silver nanowire (AgNW) networks have been adopted as a front electrode in Cu(In,Ga)Se2 (CIGS) thin film solar cells due to their low cost and compatibility with the solution process. When an AgNW network is applied to a CIGS thin film solar cell, reflection loss can increase because the CdS layer, with a relatively high refractive index (n ~ 2.5 at 550 nm), is exposed to air. To resolve the issue, we apply solution-processed ZnO nanorods to the AgNW network as an anti-reflective coating. To obtain high performance of the optical and electrical properties of the ZnO nanorod and AgNW network composite, we optimize the process parameters - the spin coating of AgNWs and the concentration of zinc nitrate and hexamethylene tetramine (HMT - to fabricate ZnO nanorods. We verify that 10 mM of zinc nitrate and HMT show the lowest reflectance and 10% cell efficiency increase when applied to CIGS thin film solar cells.

• 한국재료학회지
• /
• 제12권6호
• /
• pp.431-435
• /
• 2002

The dark current and photocurrent(PC) spectrum of Mg-doped GaN thin film were investigated with various bias voltages and temperatures. At high temperature and small bias, the dark current is dominated by holes thermally activated from an acceptor level Al located at about 0.16 eV above the valence band maximum $(E_v)$, The PC peak originates from the electron transition from deep level A2 located at about 0.34 eV above the $E_v$ to the conduction band minimum $(E_ C)$. However, at a large bias voltage, holes thermally activated from A2 to Al experience the field-in-duces tunneling to form one-dimensional defect band at Al, which determines the dark current. The PC peak associated with the transition from Al to $E_ C$ is also observed at large bias voltages owing to the extended recombination lifetime of holes by the tunneling. In the near infrared region, a strong PC peak at 1.20 eV appears due to the hole transition from deep donor/acceptor level to the valence band.

• Journal of Magnetics
• /
• 제15권2호
• /
• pp.51-55
• /
• 2010

The electronic and magnetic properties of Cu-doped GaN with a Cu concentration of 6.25% and 12.5% are examined theoretically using the full-potential linear muffin-tin orbital method. The magnetic moment of Cu atoms decreases with increasing Cu concentration. The spin-polarization of Cu atoms is reduced due to the Cu d-d interaction depending on the distance between the nearest neighbouring Cu atoms. Cu atoms exhibits a clustering tendency in GaN. For Cu-adsorbed GaN thin films with a surface coverage of 0.25, the ferromagnetic state is found to be the energetically favourable state with an induced magnetic moment of $0.54\;{\mu}_B$ per supercell.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.207-207
• /
• 2010

Both ZnO and GaN have excellent physical properties in optoelectronic devices such as blue light emitting diode (LED), blue laser diode (LD), and ultra-violet (UV) detector. The ZnO/GaN heterostructure, which has a potential to achieve the cost efficient LED technology, has been fabricated by using radio frequency (RF) sputtering, pyrolysis, metal organic chemical vapor deposition (MOCVD), direct current (DC) arc plasmatron, and pulsed laser deposition (PLD) methods. Among them, the PLD system has a benefit to control the composition ratio of the grown film from the mixture target. A 500-nm-thick ZnO film was grown by PLD technique on c-plane GaN/sapphire substrates. The post annealing process was executed at some varied temperature between from $300^{\circ}C$ to $900^{\circ}C$. The morphology and crystal structural properties obtained by using atomic force microscope (AFM) and x-ray diffraction (XRD) showed that the crystal quality of ZnO thin films can be improved as increasing the annealing temperature. We will discuss the post-treatment effect on film quality (uniformity and reliability) of ZnO/GaN heterostructures.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 12th KACG Technical Meeting and the 4th Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.247-251
• /
• 1997

GaN films were grown on three differently oriented sapphire substates; (0001), (11-20), and (1-20). GaN films on the (0001) and (11-20) substates have a haxagonal structure and their growth rate was 0.6 $\mu\textrm{m}$/hr in both case. The film on the (1-102) substrate was too thin to identify its crystalline state. Growth rate was about the half of the others. Substrate orientation is one of the factor determining growth rate. The adhesion between GaN film and alumina substrate seems to be very good judging from the fractography.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1995년도 추계 학술발표 강연 및 논문개요집
• /
• pp.9-9
• /
• 1995

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.172-175
• /
• 2003

ZnO:Al thin film for application to FBAR's bottom electrode using ZnO piezoelectric thin film were prepared by FTS, in order to improve the crystallographic properties of ZnO thin films because the ZnO:Al thin film and ZnO thin films structure is equal each other. So we prepared the ZnO:Al thin film with oxygen gas flow rate. Thickness and c-axis preferred orientation and electric properties of ZnO:Al bottom electrode were evaluated by $\alpha$-step, XRD and 4-point probe..

• 한국전기전자재료학회논문지
• /
• 제22권6호
• /
• pp.470-475
• /
• 2009

We deposited $Al_2O_3$ thin films on GaN by remote plasma atomic layer deposition (RPALD) technique, trimethylaluminum(TMA) and oxygen were used as precursors, at fixed process condition, the number of cycle were changed. Growth rate per cycle was $1.2\;{\AA}$/cycle. and Growth rate was in proportion to a number of cycle, the GaN MIS capacitors that $Al_2O_3$ thin film were deposited above 12 nm, have excellent electrical properties, a low electrical leakage current density(${\sim}10^{-10}\;A/cm^2$ at 1.5 MV), but below 12 nm, we can see the degradation of the leakage current density. After post deposition annealing, Dielectric constant was estimated by 1 MHz high-frequency C-V method, it was varied with the anealing temperature from 6.9 at no post anealed to 7.6 at $800^{\circ}C$, and we can see a improvement of the leakage current density and breakdown voltage by post deposition anealing below $700^{\circ}C$, but, after anealed at $800^{\circ}C$, we can see the degradation of the leakage current density and breakdown voltage.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.331-334
• /
• 2003

Photovoltaics is considered as one of the most promising new energy technology, because its energy source is omni present, pollution-free and inexhaustive. It is agreed that these solar cells must be thin film type because thin film process is cost-efficive in the fact that it uses much less raw materials and can be continuous. The defect chalcopyrite material $CuIn_3Se_5$ has been identified as playing an essential role in efficient photovoltaic action in $CuInSe_2$-based devicesm It has been reported to be of n-type conductivity, forming a p-n junction with its p-type counterpart $CuInSe_2$. Because the most efficient cells consist of the $Cu(In,Ga)Se_2$ quarternary, knowledge of some physical properties of the Ga-containing defect chalcopyrite $Cu(In,Ga)_3Se_5$ may help us better understand the junction phenomena in such devices.

• 한국결정성장학회지
• /
• 제15권1호
• /
• pp.1-9
• /
• 2005

AgGaS₂ 단결정 박막을 수평 전기로에서 합성한 AgGaS₂ 다결정을 증발원으로하여, hot wall epitaxy(HWE) 방법으로 증발원과 기판(반절연성-GaAs(100))의 온도를 각각 590℃, 440℃로 고정하여 성장하였다. 이때 단결정 박막의 결정성은 광발광 스펙트럼과 이중결정 X-선 요동곡선(DCRC)으로 부터 구하였다. AgGaS₂의 광흡수 스펙트럼으로부터 구한 온도에 의존하는 에너지 밴드갭 E/sub g/(T)는 Varshni 공식에 fitting한 결과 E/sub g/(T) = 2.7284 eV - (8.695×10/sup -4/ eV/K)T²/(T + 332 K)를 잘 만족하였다. 성장된 AgGaS₂ 단결정 박막을 Ag, Ga, S 분위기에서 각각 열처리하여 10K에서 photoluminescience(PL) spectrum을 측정하여 점 결함의 기원을 알아보았다. PL 측정으로 부터 얻어진 V/sub Ag/, V/sub s/, Ag/sub int/, 그리고 S/sub int/는 주개와 받개로 분류되어졌다. AgGaS₂ 단결정 박막을 Ag 분위기에서 열처리하면 n형으로 변환됨을 알 수 있었다. 또한, Ga 분위기에서 열처리하면 열처리 이전의 PL 스펙트럼을 보이고 있어서. AgGaS₂ 단결정 박막에서 Ga은 안정된 결합의 형태로 있기 때문에 자연 결함의 형성에는 관련이 없음을 알았다.