• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.1 s.28
• /
• pp.55-62
• /
• 2004

More recently, multiple reference based RTK GPS techniques(VRS ; Virtual Reference System) are becoming increasingly important for many precise GPS applications in many countries to overcome the constrained distance limitations of standard RTK systems. The precision of the position solutions of the rover receiver is closely connected with that of the corresponding virtual reference points(VRPs). The objective of this paper is to investigate the accuracy and performance of the VRPs on the test network have been made in post mode, and the overall analysis results were presented by comparing the solutions for the VRPs from the existing GPS reference station with the true values of the coordinates used to produce the observation data. The results show the reasonable accuracies of VRPs in the network area by using the VRS concept in post mode.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.499-505
• /
• 2004

현재 국내에서 활발히 이루어지고 있는 GPS 정밀측지측량은 획득된 GPS 관측값의 결과값이 GPS 기준점의 기하학적 강도와 분산계수의 상관관계의 연관성과의 분석없이 사용되고 있는 문제점을 파악하고 육지와 해상의 통합지리정보시스템구축을 위한 수치지도와 전자해도의 통합투영의 필요성에 의해서 이루어졌다. 본 연구의 목적은 크게 GPS 관측값의 정밀도를 향상시키는 방법과 수치지도와 전자해도의 통합투영으로 GPS 기준점들을 이용한 수치지도와 전자해도상의 경계선 오차량을 비교검토를 통해 수치지도와 전자해도의 통합관리의 방향을 제시하는데 있다. GPS 관측값의 정밀도 향상을 위한 방법제시를 위하여 GPS 망조정에 사용되는 3점의 기준점에 대한 기하학적인 강도에 따른 정밀도 분석방법과 분산계수의 변화에 따른 GPS 관측값들의 정밀도 분석방법으로 나누어 검토하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.4
• /
• pp.367-380
• /
• 2011

This paper has focused on deriving a GPS based geodetic network adjustment strategy to continuously determine coordinate sets of the national geodetic control points. After domestic literature review on the topic and overseas case studies about countries that recently reformed their geodetic infrastructure have been carried out, a simplified geodetic network consisting of two layers, namely GPS active and passive network, has been proposed to maximize effectiveness of the network adjustment through reducing the number of the passive points. Furthermore, a GPS data processing and network adjustment procedure has been derived to support the continuous management scheme. While a scheme for the active layer adopts a sequential least squares adjustment based on a multi-baseline, that of the passive layer employs a multi-session adjustment technique with respect to 3-dimensional baseline vectors. Finally, experimental adjustment against a network comprising 24 active and 6,900 passive stations has been performed to demonstrate the efficiency and the effectiveness of the proposed method.

• Spatial Information Research
• /
• v.12 no.4 s.31
• /
• pp.371-382
• /
• 2004

Continuously Operating Reference Stations (CORS) provides GPS measurements to support high accuracy CPS positioning. The CORS improves GPS positioning productivity by eliminating the requirement for GPS users to operate two receivers. Previously, this is achieved by providing data from CORS to users in post-mission mode. However, the efficiency of the CORS will be maximized by upgrading it in real-time operation using RTK-GPS surveying because users can obtain centimeter-level accuracy in real-time without operating their own reference stations. In this research, authors extracted the arbitrary point's coordinate which is using GPS CORS data, now served in RINEX FORMAT via Internet, with observation network of the existing triangulation and GPS CORS data. And then, RTK GPS was performed with this arbitrary point as reference station.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.609-616
• /
• 2017

National Geographic Information Institute has established a plan that preoccupies UCPs (Unified Control Points) at 2~3km intervals in urban areas by considering the distance between existing UCPs by satellite images and aerial photographs in 2015. In this study, we discussed the method of selecting the locations of optimal UCPs by simulating GPS reception environment in candidate sites for UCPs using GIS. For this purpose, we selected new candidate sites for installing UCPs using satellite images and aerial photographs, and analyzed the GPS reception environment by calculating the visibility distance from buildings around UCPs using GIS skyline analysis. The number of and the arrangement of visible satellites that are capable of GPS satellite reception from the viewpoint of sky view were showed by GIS skyline analysis. Quality evaluation results of GPS observation data were compared with average PDOP calculated from hourly PDOP and TEQC in two points of Sungkyunkwan University during 8 hours. As a result of GPS reception environment using GIS, if the PDOP increases, the data acquisition rate is lowed, and the multipath error and the cycle slip are increased. Thus, this study verified that the quality of GPS observation data can be secured by constructing three-dimensional spatial information and simulating PDOP when preoccupying multiple UCPs using GIS.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.04a
• /
• pp.167-172
• /
• 2002

본 연구는 GPS를 이용하여 위성 영상의 입체 해석으로 산출된 SPOT영상의 기준점 및 수치 표고 모형의 평가에 목적이 있다. 이를 위해 삼각점 및 상시관측소를 고정으로 한 GPS 해석을 수행하였으며 정지측량과 이동측량의 정확도를 비교함으로써 위성 영상의 기준점과 수치 표고 모형의 평가를 위한 측량 방법을 분석하였다. 연구 결과, SPOT영상의 해상력을 고려할 때, 이동 GPS측량기법으로도 수치 표고 모형의 정확도 평가가 가능하였으며, 기준점 좌표 산출에 있어서 고정점에 삼각점 대신 상시관측점들을 사용함으로써 경제적인 GPS 측량을 꾀할 수 있었다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.2 s.29
• /
• pp.29-35
• /
• 2004

The plenty of availability and high precision of GPS CORS is the reason why it become important more and more in the fields of surveying widely. In this study, I extracted the arbitrary point's coordinate which is using GPS CORS data, now served in RINEX FORMAT via Inter-Net, with observation network of the existing triangulation and GPS CORS data. Then, with this arbitrary point as reference station RTK GPS was performed. And I will study VRS-GPS concept which reduces the time and cost in the fields of surveying.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.3
• /
• pp.41-49
• /
• 2007

In this study, the software to compute Bessel coordinates by trilateration adjustment was developed, and the software was used to determine coordinates of the cadastral control points over the southern Korean peninsula. The baseline measured by GPS was reduced to the distance on geoid surface by applying PNU95 geoid model, and the distance on geoid surface was reduced to the plane grid distance by applying scale factor of map projection of Bessel coordinates. Using the plane grid distance, Bessel coordinates of 32 CORS (Continuously Operating Reference Station) were computed by free adjustment at first, and then the coordinates of the cadastral control points were computed by joining the control points to adjacent CORS. The result shows a possibility of construction of highly accurate and consistent cadastral survey network with coordinate error less than 1ppm of distance, when newly computing the coordinates of the control points by using distances measured by GPS.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.1
• /
• pp.21-32
• /
• 1999

Mapping and precise point determination by photogrammetry have been shown to be an economic solution. But control points are necessary to determine the exterior orientation parameters. Although the number of required control points has been reduced based on extended bundle adjustment and reinforced cross-strip, the ground survey is a significant factor of whole expenses in photogrammetry. The status of GPS-photogrammetry with kinematic DGPS-positioning to overcome this disadvantages, is now steadly progressive since the first possibility has been proved. The completed satellite configuration, powerful receiver function and upgraded software for kinematic DGPS-positioning have extensively improved the accuracy of combined bundle adjustment. So the research for the operational use of GPS-photogrammetry is absolutely necessary. The presented test field was designed for identification of subsidences in a coal mining area, flown with 60％ sidelap and cross strips. Just with 6 control points and combined block adjustment instead of the traditionally used 21 horizontal and 81 vertical control points the same ground accuracy has been reached. The accuracy of kinematic GPS-positioning and combined block adjustment was independent upon the distance of the ground reference station. It also has been showed that the special model for the systematic error correction in the combined block adjustment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.5
• /
• pp.445-458
• /
• 2012

The objective of GPS control surveying is ultimately to determine coordinate sets of control points within targeted accuracy through a series of observations and network adjustments. To this end, it is of equivalent importance for the accuracy of these coordinates to be realistically represented by using an appropriate method. The accuracy representation can be quantitively made by the variance-covariance matrices of the estimates, of which features are sensitive to the mathematical models used in the adjustment. This paper deals with impact of functional and stochastic modeling techniques into the accuracy representation of the GPS control surveying with a view of gaining background for its standardization. In order to achieve this goal, mathematical theory and procedure of the single-baseline based multi-session adjustment has been rigorously reviewed together with numerical analysis through processing real world data. Based on this study, it was possible to draw a conclusion that weighted-constrained adjustment with the empirical stochastic model was among the best scheme to more realistically describe both of the absolute and relative accuracies of the GPS surveying results.