• 디지털콘텐츠학회 논문지
• /
• 제16권5호
• /
• pp.775-781
• /
• 2015

2015년 2월 11일 국내 최초 2HD MMS 시험방송이 EBS에서 시작되었다. MPEG-2 코덱기반의 영상 압축 방식을 사용하고 있으며, 화질 최적화를 위해서 1080i 와 720p 주사방식에 따른 변화 및 효율적 데이터 사용을 위한 가변 비트율(Variable Bit Rate) 연구결과를 반영하였다. MMS 방송에서 화질 최적화를 위하여 2개의 HD 채널에 가변 비트율을 적용하여 인코딩하는 경우 가변 GOP(Group Of Picture) 동작으로 수신 TV에서 채널 전환 시 영상 표출에 걸리는 시간이 길어지는 현상이 발생한다. 본 연구에서는 ON-AIR TS 분석 및 실험을 통해서 인코딩 단계에서 GOP 설정에 따른 I 프레임 디코딩 시간 관계를 검증하였다. 검증 데이터를 활용하여 Encoder GOP 파라미터를 조정하는 방법으로 1080i와 720p 주사방식에 따라서 다르게 나타나는 영상 표시 시간 지연문제를 개선하였다.

• 한국전자통신학회논문지
• /
• 제7권6호
• /
• pp.1377-1383
• /
• 2012

비디오 코딩에서 GOP의 첫 번째 프레임은 많은 비트를 발생시키는 인트라 모드로 압축되고 다음 프레임의 인터 모드 압축에 사용되기 때문에 첫 프레임을 위한 초기 QP 값은 첫 프레임뿐만 아니라 이후 프레임에도 영향을 주게 된다. 일반적으로 초기 QP 값은 bpp 값에 따라 4가지 값 중에 하나로 설정된다. 이렇게 설정하는 것은 간단한 반면 부정확한 문제가 있다. 정확한 초기 QP 값 예측을 위해서는 bpp 뿐만 아니라 영상의 복잡도와 전송률도 함께 고려하여야 한다. 본 논문에서는 GOP의 인코딩 특성을 분석하여 전체 GOP의 PSNR 값을 최대로 하는 초기 QP 값을 찾기 위한 트래픽 모델과 실시간 영상 압축에서 모델 파라미터를 실시간으로 구하는 방법을 제안한다. 실험 결과는 제안하는 모델이 초기 QP 계산에 필요한 트래픽 특성을 잘 반영하고 있으며 또한 실시간으로 모델 파라미터를 구하는 방법도 효과적으로 작동함을 보여준다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1996년도 학술대회
• /
• pp.147-151
• /
• 1996

This paper describes two traffic shaping methods for VBR(variable bit rate) video bit streams encoded in the MPEG-2 syntax. Difficulties in control of VBR video traffic are lessened by traffic shaping. Burstness of single layer MPEG-2 video can be reduced by performing intra-refresh in more than one consecutive frames. In two layer encoding of spatial scalability, burstness can be reduced by setting the temporal locations of GOP starting frame of a layer, differently from the other. Queueing analysis shows that these two methods outperform conventional encoding schemes in terms of temporal and semantic QoS requirements.

• 방송공학회논문지
• /
• 제7권4호
• /
• pp.355-361
• /
• 2002

본 논문은 MPEG-2 시스템 스트림 영역에서의 접합(splicing)이 MPEG-2 비디오 화면의 손상 없는 재생을 보장할 수 있는 방법을 연구한다. 기존의 접합은 MPEG-2 시스템의 TS 영역에서 수행하고 있는데, 비디오 문제로 한정시킨 영상편집의 관점에서 보면, 화면의 깨짐이 없는 임의의 픽처에서의 접합을 보장할 수 없다. 본 논문에서는 MPEG-2 시스템의 PES 영역에서의 비디오 화면을 고려한 접합을 다룸으로서 상위의 TS와 PS에서 동일한 목적의 접합을 수행할 수 있도록 하는 연구의 기반을 마련하고자 하였다. 그러기 위해서 먼저, 자각 다른 두 PES 스트림의 접합 시 발생하는 문제와 이로 인해 비디오 화면에 미치게 되는 영향을 비교, 분석하였고. 이를 토대로, PES 영역에서 직접 비디오 화면의 재생시에 일어날 수 있는 문제의 원인을 해결하는 방안을 모색하였다. 그 결과, PES 패킷의 헤더 정보 중 PES 패킷 길이 필드 값을 이용하면, PES 패킷의 상태와 관계없이 GOP 단위의 접합을 보장할 수 있음을 확인하였다.

• Steel and Composite Structures
• /
• 제46권2호
• /
• pp.203-210
• /
• 2023

In the present research, dynamic deflections of a sandwich beam having functionally graded (FG) porous core have been investigated assuming that the sandwich beam is exposed to a pulse load of blast type. The two layers of sandwich beam have been made of a polymeric matrix reinforced by graphene oxide powder (GOP). The micromechanical formulation of the layers has been done via Halpin-Tsai model. The solution method is chosen to be Ritz method which is an efficient method to solve the system of equations of beams modeled based on a higher-order theory. To derive the time history of sandwich beam under pulse load, Laplace method has been used. The porosity content of the core, the GOP content of the layers, thickness of the layer and also duration of the applied load have great influences of the responses of sandwich beam.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2006년도 학술대회
• /
• pp.127-132
• /
• 2006

Quantization in video coding plays an important role in controlling the bit-rate of compressed video bit-streams. It has been used as an important control means to adjust the amount of bit-streams to at]owed bandwidth of delivery networks and storage. Due to the dependent nature of video coding, dependent quantization has been proposed and applied for MPEG-2 video coding to better maintain the quality of reconstructed frame for given constraints of target bit-rate. Since Scalable Video Coding (SVC) being currently standardized exhibits highly dependent coding nature not only between frames but also lower and higher scalability layers where the dependent quantization can be effectively applied, in this paper, we propose a dependent quantization scheme for SVC and compare its performance in visual qualities and bit-rates with the current JSVM reference software for SVC. The proposed technique exploits the frame dependences within each GOP of SVC scalability layers to formulate dependent quantization. We utilize Lagrange optimization, which is widely accepted in R-D (rate-distortion) based optimization, and construct trellis graph to find the optimal cost path in the trellis by minimizing the R-D cost. The optimal cost path in the trellis graph is the optimal set of quantization parameters (QP) for frames within a GOP. In order to reduce the complexity, we employ pruning procedure using monotonicity property in the trellis optimization and cut the frame dependency into one GOP to decrease dependency depth. The optimal Lagrange multiplier that is used for SVC is equal to H.264/AVC which is also used in the mode prediction of the JSVM reference software. The experimental result shows that the dependent quantization outperforms the current JSVM reference software encoder which actually takes a linear increasing QP in temporal scalability layers. The superiority of the dependent quantization is achieved up to 1.25 dB increment in PSNR values and 20% bits saving for the enhancement layer of SVC.

• Advances in nano research
• /
• 제13권5호
• /
• pp.427-435
• /
• 2022

Static stability behaviors of annular sandwich plates constructed from two layers of particle-reinforced nanocomposites have been investigated in the present article. The type of nanoscale particles has been considered to be graphene oxide powders (GOPs). The particles are assumed to have uniform and graded dispersions inside the matrix and the material properties have been defined according to Halpin-Tsai micromechanical model. The core layer is assumed to have honeycomb configuration. Annular plate has been formulated according to thin shell assumptions considering geometrical nonlinearities. After solving the governing equations via Galerkin's technique, it is showed that the post-buckling curves of annular sandwich plates rely on the core wall thickness, amount of GOP particles, sector radius, and thickness of layers.

• 한국통신학회논문지
• /
• 제21권8호
• /
• pp.1928-1936
• /
• 1996

In this paper, we propose an adaptive bandwidth allocation algorithm for the transmission of VBR video through ATM Networks. In order to evaluate the required bandwidth for the VBR video, the characteristics of the compressed VBR video generated by the two-layered coder are analyzed with variations in the number of GOP(N), quantizer scale(q), and the number of low-frequency DCT coefficients(.betha.). The two-layer coder which is used to separate from the number of DCT coefficients is designed to transmit the VBR video efficiently. The compressed data generated by the two-layer coder are splitted into the high priority and low priority cells. If congestion is occurred in ATM networks, the minimum image quality is maintained by the high priority cells. The required bandwidth for VBR video is estimated with a prediction algorithm using the scene anframe correlations as well as the statistical properties of the VBR video sources. Strong correlation among the adjacent slices in a frame represents by the scene correlation andstrong correlation among the frames is represented by the frame correlation. The performance of the bandwidth allocation scheme proposed is evaluated in terms of the bandwith utilization, cell loss rate, and SNR with variations in q, n, .betha.. Simulation rewsults shown that the proposed scheme is superior to the conventional methods.

• 한국멀티미디어학회논문지
• /
• 제18권10호
• /
• pp.1205-1215
• /
• 2015

Efficient multi-view coding techniques are needed to reduce the complexity of multi-view video which increases in proportion to the number of cameras. To reduce the complexity and maintain image quality and bit-rates, an motion estimation method and temporal prediction structure are proposed in this paper. The proposed motion estimation method exploits the characteristic of motion vector distribution and the motion direction and motion size of the block to place search points and decide the search patten adaptively. And the proposed prediction structure divides every GOP to decide the maximum index of hierarchical B layer and the number of pictures of each B layer. Experiment results show that the complexity reduction of the proposed temporal prediction structure and motion estimation method over hierarchical B pictures prediction structure and TZ search method which are used in JMVC(Joint Multi-view Video Coding) reference model can be up to 45∼70% while maintaining similar video quality and bit rates.

• Steel and Composite Structures
• /
• 제45권5호
• /
• pp.767-774
• /
• 2022

A geometrically nonlinear stability analysis of sandwich annular plates with cellular core and particle-reinforced composite layers has been performed in the present research. The particles are powders of graphene oxide (GOP) which act as nanoscale filler of epoxy matrix. To this regard, Halpin-Tsai micromechanical scheme has been used to define the material properties of the layers. A square shaped core has been considered for which the material properties have been defined based on the relative density concept. Large deflection theory of thin shells has been selected to develop the complete formulation of sandwich plate. The geometrically nonlinear stability analysis of sandwich annular plates has been carried out by indicating that the buckling load is dependent on particle amount, thickness of layer and core relative density.