• Journal of Digital Contents Society
• /
• v.16 no.5
• /
• pp.775-781
• /
• 2015

EBS started 2HD MMS experimental broadcasting for the first time in Korea on Feb. 11, 2015. It uses the picture compression technique based on MPEG-2 CODEC, and applies the result of the experiment about variable bit rates and changes according to the scanning types, 1080i and 720p. But when changing channels, the delay in displaying picture occurs because of the operation of the variable GOP on MMS broadcasting, which optimizes image quality by application variable bit rates. In this study, verified the relationship between the decoding time of I frames and the GOP set in the encoding step by experimenting and analyzing ON-AIR TS. By using the verification data and adjusts the Encoder GOP parameters, improved the different video display time delays according to the scanning mode 1080i and 720p.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1377-1383
• /
• 2012

The first frame of a GOP is encoded in intra mode which generates a larger number of bits. In addition, the first frame is used for the inter mode encoding of the following frames. Thus the intial QP for the first frame affects the first frame as well as the following frames. Traditionally, the initial QP is determined among four constant values only depending on the bpp. Although this initialization scheme is simple, yet it is not accurate enough. An accurate intial QP prediction scheme should not only depends on bpp but also on the complexity of the video sequence and the output bandwidth. In this paper, we propose a traffic model for finding the optimal initial QP which maximizes the PSNR of the GOP. We also propose a method to find model parameters for real-time video encoding. It is shown by experimental results that the proposed traffic model captures initial QP characteristics effectively and the proposed method for model parameters accurately estimates the real values.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1996.06a
• /
• pp.147-151
• /
• 1996

This paper describes two traffic shaping methods for VBR(variable bit rate) video bit streams encoded in the MPEG-2 syntax. Difficulties in control of VBR video traffic are lessened by traffic shaping. Burstness of single layer MPEG-2 video can be reduced by performing intra-refresh in more than one consecutive frames. In two layer encoding of spatial scalability, burstness can be reduced by setting the temporal locations of GOP starting frame of a layer, differently from the other. Queueing analysis shows that these two methods outperform conventional encoding schemes in terms of temporal and semantic QoS requirements.

• Journal of Broadcast Engineering
• /
• v.7 no.4
• /
• pp.355-361
• /
• 2002

In this paper, several methods which guarantee the seamless editing when the splicing is applied to the MPEG-2 system streams are described. In the MPEG-2 system standard, it is recommended that the splicing technique is applied in the Transport Stream(TS) domain. However, in view of the video editing, the splicing at an arbitrary picture unit can not be guaranteed. The splicing in the PES domain is only considered in this paper because the PES is one of the MPEG-2 system streams and this result could be directly extended to the video splicing techniques in the TS or PS domain. Thus. the problems that might occur when different two PES streams are spliced and its effects to the video quality are compared and analyzed. Based on this analysis. several methods that can resolve these problems directly in the PES domain are proposed. Consequently, the computer simulation demonstrates that the splicing at a GOP modulo is guaranteed to have good video quality even without considering the state of the PES packet only if the PES_packet_length field of the PES packet header is used.

• Steel and Composite Structures
• /
• v.46 no.2
• /
• pp.203-210
• /
• 2023

In the present research, dynamic deflections of a sandwich beam having functionally graded (FG) porous core have been investigated assuming that the sandwich beam is exposed to a pulse load of blast type. The two layers of sandwich beam have been made of a polymeric matrix reinforced by graphene oxide powder (GOP). The micromechanical formulation of the layers has been done via Halpin-Tsai model. The solution method is chosen to be Ritz method which is an efficient method to solve the system of equations of beams modeled based on a higher-order theory. To derive the time history of sandwich beam under pulse load, Laplace method has been used. The porosity content of the core, the GOP content of the layers, thickness of the layer and also duration of the applied load have great influences of the responses of sandwich beam.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2006.11a
• /
• pp.127-132
• /
• 2006

Quantization in video coding plays an important role in controlling the bit-rate of compressed video bit-streams. It has been used as an important control means to adjust the amount of bit-streams to at]owed bandwidth of delivery networks and storage. Due to the dependent nature of video coding, dependent quantization has been proposed and applied for MPEG-2 video coding to better maintain the quality of reconstructed frame for given constraints of target bit-rate. Since Scalable Video Coding (SVC) being currently standardized exhibits highly dependent coding nature not only between frames but also lower and higher scalability layers where the dependent quantization can be effectively applied, in this paper, we propose a dependent quantization scheme for SVC and compare its performance in visual qualities and bit-rates with the current JSVM reference software for SVC. The proposed technique exploits the frame dependences within each GOP of SVC scalability layers to formulate dependent quantization. We utilize Lagrange optimization, which is widely accepted in R-D (rate-distortion) based optimization, and construct trellis graph to find the optimal cost path in the trellis by minimizing the R-D cost. The optimal cost path in the trellis graph is the optimal set of quantization parameters (QP) for frames within a GOP. In order to reduce the complexity, we employ pruning procedure using monotonicity property in the trellis optimization and cut the frame dependency into one GOP to decrease dependency depth. The optimal Lagrange multiplier that is used for SVC is equal to H.264/AVC which is also used in the mode prediction of the JSVM reference software. The experimental result shows that the dependent quantization outperforms the current JSVM reference software encoder which actually takes a linear increasing QP in temporal scalability layers. The superiority of the dependent quantization is achieved up to 1.25 dB increment in PSNR values and 20% bits saving for the enhancement layer of SVC.

• Advances in nano research
• /
• v.13 no.5
• /
• pp.427-435
• /
• 2022

Static stability behaviors of annular sandwich plates constructed from two layers of particle-reinforced nanocomposites have been investigated in the present article. The type of nanoscale particles has been considered to be graphene oxide powders (GOPs). The particles are assumed to have uniform and graded dispersions inside the matrix and the material properties have been defined according to Halpin-Tsai micromechanical model. The core layer is assumed to have honeycomb configuration. Annular plate has been formulated according to thin shell assumptions considering geometrical nonlinearities. After solving the governing equations via Galerkin's technique, it is showed that the post-buckling curves of annular sandwich plates rely on the core wall thickness, amount of GOP particles, sector radius, and thickness of layers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.8
• /
• pp.1928-1936
• /
• 1996

In this paper, we propose an adaptive bandwidth allocation algorithm for the transmission of VBR video through ATM Networks. In order to evaluate the required bandwidth for the VBR video, the characteristics of the compressed VBR video generated by the two-layered coder are analyzed with variations in the number of GOP(N), quantizer scale(q), and the number of low-frequency DCT coefficients(.betha.). The two-layer coder which is used to separate from the number of DCT coefficients is designed to transmit the VBR video efficiently. The compressed data generated by the two-layer coder are splitted into the high priority and low priority cells. If congestion is occurred in ATM networks, the minimum image quality is maintained by the high priority cells. The required bandwidth for VBR video is estimated with a prediction algorithm using the scene anframe correlations as well as the statistical properties of the VBR video sources. Strong correlation among the adjacent slices in a frame represents by the scene correlation andstrong correlation among the frames is represented by the frame correlation. The performance of the bandwidth allocation scheme proposed is evaluated in terms of the bandwith utilization, cell loss rate, and SNR with variations in q, n, .betha.. Simulation rewsults shown that the proposed scheme is superior to the conventional methods.

• Journal of Korea Multimedia Society
• /
• v.18 no.10
• /
• pp.1205-1215
• /
• 2015

Efficient multi-view coding techniques are needed to reduce the complexity of multi-view video which increases in proportion to the number of cameras. To reduce the complexity and maintain image quality and bit-rates, an motion estimation method and temporal prediction structure are proposed in this paper. The proposed motion estimation method exploits the characteristic of motion vector distribution and the motion direction and motion size of the block to place search points and decide the search patten adaptively. And the proposed prediction structure divides every GOP to decide the maximum index of hierarchical B layer and the number of pictures of each B layer. Experiment results show that the complexity reduction of the proposed temporal prediction structure and motion estimation method over hierarchical B pictures prediction structure and TZ search method which are used in JMVC(Joint Multi-view Video Coding) reference model can be up to 45∼70% while maintaining similar video quality and bit rates.

• Steel and Composite Structures
• /
• v.45 no.5
• /
• pp.767-774
• /
• 2022

A geometrically nonlinear stability analysis of sandwich annular plates with cellular core and particle-reinforced composite layers has been performed in the present research. The particles are powders of graphene oxide (GOP) which act as nanoscale filler of epoxy matrix. To this regard, Halpin-Tsai micromechanical scheme has been used to define the material properties of the layers. A square shaped core has been considered for which the material properties have been defined based on the relative density concept. Large deflection theory of thin shells has been selected to develop the complete formulation of sandwich plate. The geometrically nonlinear stability analysis of sandwich annular plates has been carried out by indicating that the buckling load is dependent on particle amount, thickness of layer and core relative density.