• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.419-421
• /
• 2022

어선은 어획물로 인한 무게 변화 및 어구 사용에 의한 외력으로 GM이 변화한다. 하지만 실시간으로 변화하는 GM을 추정하는 것은 어려우며, 현재 적용되는 추정식은 어선에 대입하기에 정확성이 떨어진다. 이에 본 논문은 어선의 GM 추정식 개발에 기여하기 위해 어선의 Roll 운동응답을 분석하고, 실험과 시뮬레이션의 GM과 파경사 관계를 밝히고자 한다. 7톤 급의 실제 운항 중인 어선의 모델선 GM을 변화시키면서 파경사별 Roll 운동응답 데이터를 수집한다. GM 변화의 경우 선박 무게중심부에 높이 방향으로 추를 조절할 수 있도록 했으며, 파경사는 동일 주기 4가지 파경사를 선정하였다. GM과 파경사가 커질수록 Roll 응답이 증가하는 경향을 보이며, GM과 파경사가 커짐에 따라 기울기가 비선형성을 보이며 증가하는 것을 확인하였다. 본 연구를 통해서 어선의 GM과 파경사의 관계를 파악하고, GM추정에 사용할 수 있느 보정 계수를 도출할 수 있다. 추후에 본 연구 내용을 활용하여 운항 중인 어선의 실시간 GM 추정시스템 개발에 기여가 가능할 것으로 생각한다.

• Journal of Navigation and Port Research
• /
• v.26 no.2
• /
• pp.189-192
• /
• 2002

In Korea, most of small fishing vessels whose lengths are under 24m frequently cause maritime accidents due to flood and capsize. In this situation, however, there are no stability criteria and data for small fishing vessels. In this paper, the authors investigated data of 10 real ships which were built since 1990, and derived equations for evaluating ship's stability using Genetic Programming. Also, the validity of GM estimation using Genetic Programming was shown with comparison of GM value by GM value by foreign standards. More data of real ships are needed for the application of these theory to ship design process.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.380-388
• /
• 2023

This study estimates the metacentric height (GM) of a model ship by varying the transverse weight distribution, considering the effects of the roll period and moment of inertia, and compares it with the GM values measured by the inclining test. In the process, the relationship between the values is analyzed. Three types of ships-a 7-ton fishing vessel, 20-ton fishing vessel, and KRISO Very Large Crude-oil Carrier (KVLCC)-were used for the experiment and comparison. The roll period and moment of inertia were measured using the free roll decay and swing frame tests, and the GM was measured using inclining test. The estimated GM from the roll period and moment of inertia showed the same trend as the GM measured using the inclining test in the change of the weight distribution. However, the GM values measured using the inclining test were lower. Therefore, additional correction factors or parameters other than the roll period and moment of inertia are necessary for estimating GM. In the future, the relationship between the weight center and the estimated GM will be analyzed to derive the correction factors.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.204-204
• /
• 2021

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.863-870
• /
• 2023

Ship capsize accidents are common in coastal waters, particularly involving small fishing boats. To prevent there overturing accidents in small fishing boats, their stabilities must be assessed at the initial design step. However, the available information during the initial design step is limited, posing challenges in performing a reliable stability evaluation. Therefore, this study presents a plan to estimate the transverse metacenter (GM) of small fishing boats using parameters such as KM, KG, and TRIM that can be determined at the initial design step. Stability was evaluated by comparing GM with the minimum transverse metacenter (GMmin) specified in the standard safety evaluation criteria for fishing boats. To calculate the required trim value for hydrostatic characteristics using K-SHIP, a stability assessment program provided by the Korea Maritime Safety and Transportation Corporation, the initial trim state is estimated based on the ship lines using the commercial CFD program STAR-CCM+. GM is then calculated by assessing the hydrostatic characteristics in relation to the boat lines using K-SHIP. Furthermore, the stability of the fully loaded state is compared by subtrcating GM from GMmin. One constructed ship is designated as the standard ship, and the stability assessment method proposed in this study is applied to evaluate stability and validate its effectiveness. Consequently, the representative line of a 4.99-ton fishing boat and nine modular lines models derived from it were evaluated, ultimately identifying a relatively superior stability.

• Journal of Korea Ship Safrty Technology Authority
• /
• v.9
• /
• pp.39-42
• /
• 2003

• The Korean Journal of Applied Statistics
• /
• v.8 no.2
• /
• pp.77-86
• /
• 1995

For the problem of testing the parallelism of two regression lines, a robust procedure is proposed and examined. The proposed test statistic is based on the one-step GM-estimators of slope parameters proposed by Song et al. (1994b). These GM-estimators used the Least Trimmed Squares estimates as an initial values so as to obtain high breakdown point. Through a small-sample Monte Carlo simulation the empirical levels and powers of the proposed test are compared with other tests under various error distributions.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.4
• /
• pp.303-308
• /
• 2015

Cultivating genetically modified (GM) crops is believed to be a practical solution to meet the increasing food demand, but GM crops are not legal in Korea mainly due to food safety issues. Even though the general public might not be ready to consume GM food, GM crops are imported and consumed as food and feed. To analyze farmers's willingness to grow GM crops for feed, a survey was conducted among crop farmers and 640 valid responses were collected by mail. In the questionnaire, the farmers were asked to select either 'yes' or 'no' if they were willing or not willing to cultivate GM rice and GM grass, respectively, under the given hypothetical income increase rate (i.e., 10%, 20%, 30%, 40%, 50%, 60%, or 70%). Logit regression was used to estimate the two dichotomous choices by explanatory variables including hypothetical income increase rate. The results show that farmers are willing to cultivate GM rice and grass when their income is expected to increase by 47% and 43%, respectively.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.252-253
• /
• 2019

선박의 안정성에서 복원성은 매우 밀접한 관계를 가진다. 선박의 복원성을 알기위해서는 GM을 알아야 한다. GM을 구하는 방법은 출항 후 횡요주기로 구하는 방법, 경사시험에 의한 방법, 배수량 등곡선도를 이용하여 계산하여 구할 수 있다. 본 연구에서는 GM을 구하는 방법들 중 출항 후 횡요주기로 구하는 방법과 경사시험에 의한 방법 간의 오차범위를 확인하며 설계된 데이터와 비교하여 정확도를 분석하고자 한다. 시험에 사용되는 모형선박은 KVLCC2이며, 모형선박의 무게, 무게중심과 관성모멘트를 변경하면서 정확도를 분석하였다.

• Korean journal of applied entomology
• /
• v.56 no.1
• /
• pp.61-67
• /
• 2017

Two major sex pheromone components (Z-8-dodecenyl acetate and E-8-dodecenyl acetate) are known in the peach fruit moth, Grapholita molesta. From a putative biosynthetic pathway of these sex pheromone components, delta 10 desaturase ($10{\Delta}$ DES) has been proposed to play a crucial role in synthesizing a species-specific stereoisomer of the double bond. However, its molecular identity was not known. This study determined a putative desaturase (Gm-comp1575) as a $10{\Delta}$ DES candidate from G. molesta transcriptome constructed from the sex pheromone gland. Its open reading frame encodes 370 amino acid sequence with a predicted molecular weight at 43.2 kDa and isoelectric point at 8.77. It was predicted to have four transmembrane domains and six glycosylation sites at N-terminal or cytosolic domains. A phylogenetic analysis with its predicted amino acid sequence indicated that Gm-comp1575 is closely related with known $10{\Delta}$ DES genes of other insects. Gm-comp1575 transcript was detected in female adults at sex pheromone gland and other abdominal tissues. RNA interference of Gm-comp1575 significantly reduced attractiveness of virgin females in apple orchard compared to control females. These results suggest that Gm-comp1575 is associated with sex pheromone biosynthesis of G. molesta.