• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.163-164
• /
• 2007

In this study, we developed intelligent spacer built in the internal type UHF PD sensors. 3-Dimensional electro-magnetic simulations were performed to analyze electric-field distribution of the single-phase GIS and three-phase GIS. After considering the spacer's specification, Sensor structures were designed and analyzed using the 3-D EM Simulator. As a result of the simulation the internal type UHF PD sensors were built in. Performance of the sensor built into real scale GIS spacer was measured in terms of return loss and detected Max voltage. And we identified a character of the intelligent spacer by using 5pC partial discharge ceil.

• 조명전기설비학회논문지
• /
• 제15권5호
• /
• pp.28-33
• /
• 2001

본 논문에서는 금속성 파티클이 GIS 스페이서에 부착되었을 경우 파괴전압특성에 대한 립의 여러 조건에서의 효과를 분석하였다. 립-스페이서의 여러 위치에 금속성 파티클을 부착하고 립의 위치, 길이, 두께 등의 변화에 따른 파괴전압을 측정하여 기조에 제안된 립-스페이서보다 파괴전압을 더욱 향상시킬 수 있는 형상을 제시하고자 하였다. 그 결과 립이 없거나 립이 하나인 스페이서 보다 립이 두 개 있는 형태의 립-스페이서가 전반적으로 가장 양호한 파괴전압 특성을 가지고 있음을 알 수 있었으며, 립의 길이와 두께에 따라서도 파괴전압 특성이 달라짐을 알 수 있었다. 특히 립의 끝단을 라운드 처리함으로써 파괴전압 특성을 더욱 향상시킬 수 있음을 알 수 있었다.

• 전기학회논문지
• /
• 제67권9호
• /
• pp.1189-1196
• /
• 2018

7 type composites (40, 45, 50, 55, 60, 65, and 70 wt.%)were prepared for the environmentally friendly GIS Spacer. Five kinds of samples were prepared for optimization of the filler content ratio (MS: MA = 1: 9, 3: 7, 5: 5, 7: 3, 9: 1) of epoxy / microsilica and microalumina. As a result of evaluation of the partial discharge resistance characteristic, surface erosion is generally slowed down as the fill amount of micro silica is increased. Also, partial discharge resistance characteristics for the development of insulating materials with optimal mixing ratios of heterologous showed a higher partial resistance of discharge and a decrease in erosion, as the filler content ratio of micro silica was larger. In the future, various researches such as electrical, mechanical, and thermal studies will be needed to develop insulating materials that can commercialize power devices in environmentally friendly insulating gas.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1378-1379
• /
• 2008

In this study, we developed intelligent spacer built in the internal type UHF PD sensors. 3-Dimensional electro-magnetic simulations were performed to analyze electric-field distribution of the single-phase GIS and three-phase GIS. After considering the spacer's specification, Sensor structures were designed and analyzed using the 3-D EM Simulator. As a result of the simulation the internal type UHF PD sensors were built in. Performance of the sensor built into real scale GIS spacer was measured in terms of return loss and detected Max voltage. And we identified a character of the intelligent spacer by using 5pC partial discharge cell.

• 한국전기전자재료학회논문지
• /
• 제33권3호
• /
• pp.225-230
• /
• 2020

Recently, with the miniaturization of GIS, there is a need for the miniaturization of spacers as accessories. Miniaturized spacers make it difficult to secure adequate insulation distances, resulting in a more concentrated electric field at the triple junction of high-voltage (HV) conductor-insulator (spacer)-insulation gas (SF₆), which is a weakness in GIS. Therefore, by introducing a new concept design technology, functionally graded material (FGM), which is recently applied to various materials and parts industries, three-dimensional control of the dielectric constant distribution in a spacer can be expected to alleviate triple-junction electric field occupancy and improve insulation performance. In this study, we propose an optimized model using NSGA-II to optimize the permittivity distribution of FGM applied spacer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.528-530
• /
• 2000

In this paper, electric field distribution of GIS by changing conductivity of spacer is analysed by the use of 3 dimensional Surface Charge Method. We find electric field distribution inside GIS was much influenced when volume resistance are lower than $10^7[\Omega-cm]$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1773-1775
• /
• 2003

In this Study, the insulation safety for Closing Resistor and Disconnect Switch(DS) of 362kV GIS was estimated through 3 dimensional electric field analysis. In addition, the basic study to secure the electric insulation design technique was carried out through the research on the effect of a metallic particle which is generated in the GIS. As a result of 3 dimensional electric field analysis, it was found that the insulation capability of Closing Resistor and DS of 362kV GIS is stable electrically. Also, the fundamental data to improve the insulation capability of spacer was obtained by analyzing the maximum electric field according to the attached angle of a metallic particle which is attached on the surface of a spacer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1649-1651
• /
• 2001

The effect of ribbed spacers having metallic particle attached to the post-type spacer on dielectric breakdown phenomena has been investigated using electric field analysis for imaginary streamer process and a breakdown experiment. It was described that the electric field analysis and the dielectric breakdown test were performed on the case that the particle was attached to the various position of the ribbed spacer having various shapes. As a result, the breakdown voltage of the spacer with two ribs was highest, and it was varied by the length and the thickness of the rib. Especially, in case of the rib with round edge, the breakdown voltage was higher than that with rectangular edge, which complied with the result through the field analysis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.207-208
• /
• 2007

Epoxy resin insulators show a lot of advantages for electrical power apparatus. Because epoxy resin provide electrical and mechanical characteristic which is excellent, it is desirable to apply epoxy resin as a spacer and post insulation in Gas Insulated Switchgear (GIS). In this study, we have investigated the influence of surface electric field attached particle contaminated spacer surfaces under SF6 gas. Also, we performed analysis of electric field. As a result, when the particle was attached on spacer, we found out a surface electric field of characteristics.

• 조명전기설비학회논문지
• /
• 제16권2호
• /
• pp.59-64
• /
• 2002

본 논문에서는 전계해석을 통하여 금속성 파티클이 GIS 스페이서의 여러 위치에 부차되었을 경우 립이 파괴전압특성에 미치는 영향을 분석하였다. 또한, 립-스페이서의 여러 위치에 금속성 파티클을 부착하고 립의 모양, 길이, 두께 등의 변화에 따라 얻은 파괴진압특성 실험결과를 전계해석의 결과와 비교·검토하였다. 전계해석의 결과 립의 연면에서의 전계집중이 다른 부분에 비하며 완화되어 절연파괴시 발생된 스트리머의 진전이 억제될 수 있다는 것을 알 수 있었으며, 실험을 통하여 파괴전압이 상승된다는 것을 확인할 수 있었다. 또한 립의 길이와 두께 등에 따라서도 파괴전압 특성이 달라짐을 알 수 있었다. 또한 립의 끝단을 라운드 처리함으로써 파괴전압 특성을 더욱 향상시킬 수 있음을 전계해석과 실험을 통하여 알 수 있었다.