• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.338-340
• /
• 2014

The purpose of this research is to support decision making of emergency rescue system with GIS which selects landing point of emergency rescue for emergency situation on mountains and dropping point when landing is impossible. The area of research was limited to Pocheon-si, Gyeonggi-do. The results were divided into two values; landing point of helicopter on mountains and dropping point. Digital map, forest type map and forest soil map were utilized as fundamental data. Factors of landing point were slope, topographical characteristics, vegetation characteristics and area of helicopter landing point by helicopter data. And, for dropping point, slope and vegetation characteristics were divided as factors and GIS intersect function was utilized for the analysis. But, this research was conducted by excluding factor values of wind direction, wind velocity, etc. In the future, it's necessary to improve effectiveness of the analysis more by making a connection with Meteorological Agency DB.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.1
• /
• pp.19-30
• /
• 2005

Korean government has constructed a nationwide cadastral map database through the cadastral map computerization project and also produced a variety of spatial data through the NGIS (National Geographic Information Systems) project. Under this circumstance, it is needed to set up the new automatic methodology that effectively solve cadastral non-coincidence problems by using various digital map data instead of expensive field survey methods. This study proposed a new automatic methodology for cadastral non-coincidence surveying and developed a prototype system as a proof of concept. Validation of this proposed method was done with some test areas. Results showed that this methodology could easily detect and assess both regional non-coincidence levels and cadastral map quadrangle non-coincidence levels. We expect that this new methodology can provide many benefits in planning and determining work priority of the forthcoming nationwide cadastral re-surveying project.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.1
• /
• pp.103-112
• /
• 2019

Extraction of region of interest for satellite image classification is one of the important techniques for efficient management of the national land space. However, recent studies on satellite image classification often depend on the information of the selected image in selecting the region of interest. This study propose an effective method of selecting the area of interest using the continuous digital topographic map constructed from high resolution images. The spatial information used in this research is based on the digital topographic map from 2013 to 2017 provided by the National Geographical Information Institute and the 2015 Sejong City land cover map provided by the Ministry of Environment. To verify the accuracy of the extracted area of interest, KOMPSAT-3A satellite images were used which taken on October 28, 2018 and July 7, 2018. The baseline samples for 2015 were extracted using the unchanged area of the continuous digital topographic map for 2013-2015 and the land cover map for 2015, and also extracted the baseline samples in 2018 using the unchanged area of the continuous digital topographic map for 2015-2017 and the land cover map for 2015. The redundant areas that occurred when merging continuous digital topographic maps and land cover maps were removed to prevent confusion of data. Finally, the checkpoints are generated within the region of interest, and the accuracy of the region of interest extracted from the K3A satellite images and the error matrix in 2015 and 2018 is shown, and the accuracy is approximately 93% and 72%, respectively. The accuracy of the region of interest can be used as a region of interest, and the misclassified region can be used as a reference for change detection.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.249-250
• /
• 2010

The study aims to propose a method that shall rapidly acquire 3D spatial information of the frequently changing city areas by using the low altitude aerial images taken by the UAV. The artificial 3D model of the artificial structures was constructed using the aerial image data photographed at the test area, calibration data of the non-metric camera and the results of the ground control point survey. Also, the digital surface model was created for areas that were changed due to a number of civil works. Through the above studies, the possibilities of constructing a 3D virtual city model, renewal of 3D GIS database, abstraction of changed information in geographic features and on-demand updating of the digital map were suggested.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.1
• /
• pp.40-48
• /
• 2011

The purpose of this study is to contribute enhancing the accuracy of viewshed analysis through the explanation for an analysis method of viewshed analysis using GIS. According to previous studies, the visible area using digital terrain in viewshed analysis depends on a visible interest area, scale of terrain, spatial resolution and surface data. In this study, we used trend analysis and RMSE analysis in order to find the effect of a visible interest area, scale of terrain, etc in viewshed analysis. Results of this study are as follows. First, the result of viewshed analysis depends on a visible interest area, scale of terrain, spatial resolution, surface data such as previous studies. Second, the results in forest area are reliable than those of flat area in terms of a visible interest area. Third, the results based on raster grid data are stable than those of TIN(triangulated irregular network) in terms of input surface data. Fourth, according to the result of trend and RMSE analysis, the spatial resolution for analysis is differently applied to different scales digital terrain map in viewshed analysis. In detail, it is desirable that the spatial resolution is set less than 10m(in the case of 1/1,000 digital terrain map), 20m(in the case of 1/5,000 map), 30m(1/25,000 map).

• Journal of Korean Society of Forest Science
• /
• v.95 no.6
• /
• pp.663-671
• /
• 2006

This study was performed for exploring the spatial distribution pattern of Pinus densiflora and Quercus spp. in Korea. Firstly, the spatial distribution map of Pinus densiflora and Quercus spp. was prepared in grid of $100m{\times}100m$ at national level, using digital forest type map and actual vegetation map. And thematic maps for topography, climate, and soil were also prepared in the raster form of $100m{\times}100m$. Through GIS based spatial analysis of the digital distribution map of Pinus densiflora and Quercus spp. and thematic maps, the spatial characteristics of Pinus densiflora and Quercus spp. distribution was explored in relation to the environmental factors such as topography, climate, and soil. And the occurrence frequency models of Pinus densiflora and Quercus spp. were derived. Pinus densiflora occurs more often than Quercus spp. at low elevation, low slope gradient, and high temperature areas. In addition, Pinus densiflora is mainly distributed at shallow and well-drained loamy soil from igneous rocks. In contrast, Quercus spp. is more common at shallow and well-drained loamy soil from metamorphic rocks. As a result, the prediction model for the spatial distribution of Pinus densiflora and Quercus spp. by topographical variables has proven successful with high statistical significance. The result of this study can contribute to rational management of Pinus densiflora and Quercus spp. stand in Korea, considering environmental factors such as topography, climate, and soil.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.1
• /
• pp.105-115
• /
• 2008

In this study, we wished to forecast the damage district by tsunami's occurrence. For this, we analyzed tsunami that can happen in our country's neighborhood coast using past data, and established tsunami's scenario by imagination with analysis result. we created a 3D topographical model about study area and analyzed an inundation area by achieving simulation by scenario. Also, we produced an imaginary inundation map by overlaying the simulation results on digital map. This study result might be utilized as infra-technology for operation of tsunami's forecast/alarm system and establishment of disaster prevention policy.

• Journal of Digital Contents Society
• /
• v.13 no.1
• /
• pp.31-36
• /
• 2012

Since the national standard topographic map is made by DXF format which is the results of the National Geographic Information System project and lots of CAD data and scanners can be used to acquire the data easily, the imports of existing DXF file will decrease the costs and time for data acquisition process. In addition, the spatial data such as topographic map should be able to convert to the middle file format such as PostScript in order to be exported into other systems. For this purpose, I design and implement three units of modules, which are File Manipulation Module, MVF Import Module, and MVF Export Module. Finally, I verify the actual transformation of topographic map that are DXF file format by conducting the series of tests.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.499-499
• /
• 2002

The goal of this study is to apply and evaluate the precipitation outflow in river basin using satellite data and GIS for proposing the efficient watershed management method. Not only precipitation outflow data but also various spatial data such as digital map, soil map, geologic map and multi-temporal TM images were used. Using landcover classification result and soil map were applied to estimate the average CN. The CN value of 63.37 by SCS method was produced in AMC-2 condition otherwise the result of direct estimation with observation method was 63 CN value. The relative error of two results was 0.59%. It can be possible to apply the satellite data for precipitation outflow analysis. For more accurate and credible analysis of this, the more multi-temporal satellite and real observation data will be needed.

• Journal of Cadastre & Land InformatiX
• /
• v.54 no.1
• /
• pp.89-102
• /
• 2024

The recent advancements in Smart City and Digital Twin technologies have highlighted the critical role of integrating GIS and BIM in urban planning and construction projects. This integration ensures the consistency and accuracy of information, facilitating smooth information exchange. However, achieving interoperability requires standardization and effective project integration management strategies. This study proposes interoperability solutions for the integration of GIS and BIM for managing various projects. The research involves an in-depth analysis of the IFC schema and data structures based on the latest IFC4 version and proposes methods to ensure the consistency of reference point coordinates and coordinate systems. The study was conducted by setting the EPSG:5186 coordinate system, used by the National Geographic Information Institute's digital topographic map, and applying virtual shift origin coordinates. Through BIMvision, the results of the shape and error check coordinates' movement in the BIM model were reviewed, confirming that the error check coordinates moved consistently with the reference point coordinates. Additionally, it was verified that even when the coordinate system was changed to EPSG:5179 used by Naver Map and road name addresses, or EPSG:5181 used by Kakao Map, the BIM model's shape and coordinates remained consistently unchanged. Notably, by inputting the EPSG code information into the IFC file, the potential for coordinate system interoperability between projects was confirmed. Therefore, this study presents an integrated and systematic management approach for information sharing, automation processes, enhanced collaboration, and sustainable development of GIS and BIM. This is expected to improve compatibility across various software platforms, enhancing information consistency and efficiency across multiple projects.