• Journal of Community Nutrition
• /
• v.1 no.1
• /
• pp.44-51
• /
• 1999

The purpose of this study was to compare dietary behavior and food intake in relation to physical complaints, such as farmer' syndrome(FS) and gastro-intestinal(GI) problem among Korean farmers. The questionnaire was composed of 24 Cornell Medical Index (CMI), 8 farmers' syndrome, and 5 GI problem questions. Food intake data was gathered by the semi-quantitative food frequency method. The subjects(male 226, female 415) who had FS and Gi problem were 12./8% and 8.3%, respectively. The physical complaints were higher in female and the elderly group. In the FS group, lower activity was seen that in normal groups. The lower health status and fatigues were found in the physical complaint groups. Dietary behavior showed low appetite in the physical complaint group, irregular lunch in FS, and irregular breakfast in GI problem group. Changes in dietary behavior were shown in the aspects of lower amount of intake quantity(40.8%), lower consumption in fat(32.8%) and salty(38.8%) foods, and diverse food items(47.8%). Quantity of food consumed was significantly different withing groups with FS. Kinds of food consumed, intake of protein source foods, milk and calcium and total animal foods were lower in the FS group. But milk and calcium source food and all animal food intakes were higher in the GID problem group. The results suggest that dietary behavior and food intake differ within the group of physical complaints.

• Journal of the Korean Ceramic Society
• /
• v.38 no.4
• /
• pp.370-379
• /
• 2001

PLD(pulsed laser deposition) 기법을 이용하여 LaAl $O_3$(100) 기판 위에 L $a_{0.67}$ $A_{0.33}$Mn $O_{3-{\delta}}$ (A=Ca, Sr, Ba) 에피 박막을 성장하였다. 박막의 격자 상수 및 스트레인 상태는 GID(grazing incidence X-ray diffraction)법과 투과 전자 현미경 법을 이용하여 조사하였다. 박막의 <001> 방향은 기판 표면의 수직방향에 평행하게 놓였으며, 박막의 단위포는 기판과의 격자 불일치에 기인하여 a/c=0.98인 의사-정방정 페롭스카이트(pseudo-tetragonal perovskite) 구조를 가졌다. A 자리의 양이온 반경이 증가함에 따라 단위포의 체적, $\varepsilon$$^{∥}$, 그리고 $\varepsilon$$_{⊥}$이 각각 증가하였다. L $a_{0.67}$ $A_{0.33}$Mn $O_{3-{\delta}}$ (A=Ca, Sr, Ba) 박막의 온도 및 자장에 따른 전기 전도 특성 MR(%), Tc, $T_{MI}$ 들을 조사하였으며, 이 결과들을 박막의 구조적 특성과 상관하여 고찰하였다.여 고찰하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.10
• /
• pp.41-49
• /
• 2013

There is a wide variety of system and applications in the power system. However, they have compatibility issues because they use different data standard and communication method. With the introduction of the smart grid, power system has been grow and diversified. Therefore power system need to be compatible with each other and the interoperability between applications is increasingly important. Thus, the IEC established IEC61970 and CIM Standard data exchange model for interoperability and system integration. Server-Client system was constructed which using CIM HSDA(Part4), a standard communication model, presented in IEC 619710. Also, self-developed real-time voltage stability analysis application and contingency analysis application was used. CIM HSDA was used for data input and real-time analysis. Tolerance of result which is in the range of allowable derived by Perform real-time voltage stability and contingency analysis of Jeju power system, and then compare it's result with PSS/E result.

• Journal of Welding and Joining
• /
• v.21 no.2
• /
• pp.97-101
• /
• 2003

The change of microstructures in the base metal during transient liquid phase bonding process of directionally Ni base superalloy, GID-111 was investigated. Bonds were fabricated using a series of holding times(0~7.2ks) at three different temperatures. The flip chip bonding utilizing self-aligning characteristic of solder becomes mandatory to meet tolerances for the optical device. In this paper, a parametric study of aging condition and pad size of samples was evaluated. A TiW/Cu/electroplated Cu UBM structure was selected and the samples were aging treated to analyze the effect of intermetallic compounds with the time variations. An FIB technique was applied to the preparation of samples for TEM observations. An FIB technique is very useful to prepare TEM thin foil specimens from the solder joint interface. After aging treatment, the tendency to decrease in shear strength was measured and the structure of the solder and the UBM was observed by using SEM, TEM and EDS. As a result, the shear strength was decreased of about 21% in the 100${\mu}{\textrm}{m}$ sample at 17$0^{\circ}C$ aging compared with the maximum shear strength of the sample with the same pad size. In the case of the 12$0^{\circ}C$ aging treatment, 18% of decrease in shear strength was measured at the 100${\mu}{\textrm}{m}$ pad size sample. An intermetallic compound of Cu6Sn5 and Cu3Sn were also observed through the TEM measurement by using.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.1
• /
• pp.48-56
• /
• 2015

There is a wide variety of system and applications in the power system. However, they have compatibility issues because they use different data standard and communication method. With the introduction of the smart grid, power system has been grow and diversified. Therefore power system need to be compatible with each other and the interoperability between applications is increasingly important. Thus, the IEC established IEC61970 and CIM Standard data exchange model for interoperability and system integration. Server-Client system was constructed which using CIM HSDA(Part4), a standard communication model, presented in IEC 619710. Also, self-developed real-time voltage stability analysis application and contingency analysis application was used. CIM HSDA was used for data input and real-time analysis. Tolerance of result which is in the range of allowable derived by Perform real-time voltage stability and contingency analysis of Jeju power system, and then compare it's result with PSS/E result.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.475-480
• /
• 2010

The safety step has been developed to ensure the passengers' safety including the disabled and the weak by eliminating gap between vehicle and platform. The type of safety step is divided according to the position that the safety step is installed. The type of safety step attached platform is the rubber type that is previously attached to a platform. The installed rubber can reduces the gap between vehicle and platform by a fixed distance. If the safety step is installed on the vehicle, it is possible to respond to the various platform typed such as straight or curved form. It is also flexible to the height of riding depends on number of passenger and platform conditions and does not require crew's additional operation. We have been developed vehicle attached safety step for advanced electric multiple unit. We hope to increase the use of safety step for the disabled and the weak to expand the convenience use of railway transportation system.

• Journal of Magnetics
• /
• v.9 no.2
• /
• pp.52-59
• /
• 2004

As deposited and annealed MTJs with the structure of $Ta(5 nm)/Cu(10 nm)/Ta(5 nm)/Ni_{80}Fe_{20}(2 nm)/Cu(5 nm)/ Ir_{25}Mn_{75}(10 nm)/Co_{70}Fe_{30}(2.5 nm)/Al-O/Co_{70}Fe_{30}(2.5nm)/Ni_{80}Fe_{20}(t)/Ta(5nm)/Ni_{80}Fe_{20}(t)/Ta(5 nm)$, where t=10, 30, 60 and 100 nm were characterized by XRD and magnetic hysteresis loops measurements. The XRD measurements were done in grazing incidence $(GID scan-2{\theta})$ and ${\theta}-2{\theta}$ geometry, by rocking curve $(scan-{\omega})$ and pole figures in order to establish correlation between texture and crystallites size and magnetic parameters of exchange biased and interlayer coupling. The variations of shifting and coercivity field of free and pinned layers after annealing in $300^{\circ}C$ correlate with the improvement of ［111］ texture and grains size of $Ni_{80}Fe_{20}$ and $Ir_{25}Mn_{75}$ respectively. The exchange biased and the coercivity fields of the pinned layer linearly increased with increasing grain size of $Ir_{25}Mn_{75}$, The reciprocal proportionality between interlayer coupling and coercivity fields of the free layer and grain size of $Ni_{80}Fe_{20}$ was found. The enhancement of interlayer coupling between pinned and free layers, after annealing treatment, indicates on the correlated in-phase roughness of dipolar interacting interfaces due to increase of crystallites size of $Ni_{80}Fe_{20}$.

• Journal of Welding and Joining
• /
• v.23 no.6
• /
• pp.99-105
• /
• 2005

The mixing ratio effect of the GTD-111(base metal) powder and the GNI-3 (Ni-l4Cr-9.5Co-3.5Al-2.5B) powder on TLP(Transient Liquid Phase) bonding phenomena and mechanism was investigated. At the mixing ratio of the base metal powder under $50wt\%$, the base metal powders fully melted at the initial time and a large amount of the base metal near the bonded interlayer was dissolved by liquid inter metal. Liquid insert metal was eliminated by isothermal solidification which was controlled by the diffusion of B into the base metal. The solid phases in the bonded interlayer grew epitaxially from the base metal near the bonded interlayer inward the insert metal during the isothermal solidification. The number of grain boundaries farmed at the bonded interlayer corresponded with those of base metal. At the mixing ratio above $60wt\%$, the base metal powder melted only at the surface of the powder and the amount of the base metal dissolution was also less at the initial time. Nuclear of solids firmed not only from the base metal near the bonded interlayer but also from the remained base metal powder in the bonded interlayer. Finally, the polycrystal in the bonded interlayer was formed when the isothermal solidification finished. When the isothermal solidification was finished, the contents of the elements in the boned interlayer were approximately equal to those of the base metal. Cr-W borides and Cr-W-Ta-Ti borides formed in the base metal near the bonded interlayer. And these borides decreased with the increasing of holding time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.537-545
• /
• 2018

In this study, transcriptome analysis was conducted to collect various information from Fagopyrum esculentum and Fagopyrum tataricum during the early germination stage. Total RNA was extracted from the seeds and at 12, 24, and 36 hrs after germination of Jeju native Fagopyrum esculentum and Fagopyrum tataricum and sequenced using the Illumina Hiseq 2000 platform. Raw data analysis was conducted using the Dynamic Trim and Lengths ORT programs in the SolexaQA package, and assembly and annotation were performed. Based on RNA-seq raw data, we obtained 16.5 Gb and 16.2 Gb of transcriptome data corresponding to about 84.2% and 81.5% of raw data, respectively. De novo assembly and annotation revealed 43,494 representative transcripts corresponding to 47.5Mb. Among them, 23,165 sequences were shown to have similar sequences with annotation DB. Moreover, Gene Ontology (GO) analysis of buckwheat representative transcripts confirmed that the gene is involved in metabolic processes (49.49%) of biological processes, as well as cell function (46.12%) in metabolic process, and catalytic activity (80.43%) in molecular function In the case of gibberellin receptor GID1C, which is related to germination of seeds, the expression levels increased with time after germination in both F. esculentum and F. tataricum. The expression levels of gibberellin 20-oxidase 1 were increased within 12 hrs of gemination in F. esculentum but continuously until 36 hrs in F. tataricum. This buckwheat transcriptome profile analysis of the early germination stage will help to identify the mechanism causing functional and morphological differences between species.