• ETRI Journal
• /
• 제33권5호
• /
• pp.780-790
• /
• 2011

This paper presents an efficient differential power analysis (DPA) countermeasure for the $Eta_T$ pairing algorithm over GF($2^n$). The proposed algorithm is based on a random value addition (RVA) mechanism. An RVA-based DPA countermeasure for the $Eta_T$ pairing computation over GF($3^n$) was proposed in 2008. This paper examines the security of this RVA-based DPA countermeasure and defines the design principles for making the countermeasure more secure. Finally, the paper proposes an efficient RVA-based DPA countermeasure for the secure computation of the $Eta_T$ pairing over GF($2^n$). The proposed countermeasure not only overcomes the security flaws in the previous RVAbased method but also exhibits the enhanced performance. Actually, on the 8-bit ATmega128L and 16-bit MSP430 processors, the proposed method can achieve almost 39% and 43% of performance improvements, respectively, compared with the best-known countermeasure.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권9호
• /
• pp.1361-1366
• /
• 2008

One-hundred and twenty Ischia grey rabbits, traditionally raised in pits, were equally divided after weaning (32 days) into three groups: group C, housed in cages (4 rabbits/cage) and fed a commercial concentrate; group GF, housed as C group and fed grasses collected on the island and crushed faba beans supplemented with an appropriate mineral vitamin mix; group P, housed in pits (8 rabbits/pit) and fed as GF group. Feed intake was recorded daily and live weight monthly up to slaughter (92 days). At slaughter, 10 rabbits per group were used to measure carcass and meat traits. The carcasses were weighed and measured according to the standard procedures and meat samples from the Longissimus dorsi and left hind leg were analysed for water holding capacity and chemical composition, respectively. During the entire trial, group C consumed significantly (p<0.01) a higher quantity of feed than the other groups (126.1 vs. 63.4 and 66.5 g/d, resp. for groups C, GF and P) and at slaughter showed a significantly (p<0.01) higher body weight (2,529.7 vs. 1,324.4 and 1,375.4 g, resp. for groups C, GF and P). Significant differences (p<0.01) were found also for dressing out percentage (68.6 vs. 66.6 and 66.9%, resp. for groups C, GF and P) and for meat chemical composition, in particular lipid percentage (4.13 vs. 1.84 and 1.93%, resp., for groups C, GF and P, p<0.01) and moisture (73.7 vs. 76.4 and 76.3%, resp. for groups C, GF and P, p<0.01). The results suggest the opportunity to obtain heavier animals raised in the pits if their diets were integrated with commercial feed.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.323-326
• /
• 2008

This paper describes some field multiplication algorithm over GF($2^m$) on 8-bit processor. Through performance comparisons among algorithm, we show that our proposal is faster than existing algorithms. The proposed algorithm save 26.38% of running time compared with naive comb multiplication algorithm which is a kind of lookup-table (LUT) based algorithm. With the proposed algorithm, a scalar multiplication over GF($2^{163}$) can be computed within 1.04 secs on 8-bit MICAz sensor mote.

• Tribology and Lubricants
• /
• 제12권1호
• /
• pp.6-14
• /
• 1996

Experimental investigation on the tribological behavior of fiber-reinforced plastics(FRP) has been studied. It is shown that the frictional behavior of carbon FRP depends on the fiber-orientation while glass FRP does not. The friction coefficient values for carbon FRP were about 0.8, 0.3, and 0.2 for normal, 45$^{\circ}$ and 0$^{\circ}$ sliding directions respectively. Also, the applied load was found to affect the friction coefficient. In the case of this work, 50 gf resulted in the highest value while 200 gf resulted in the lowest value. The friction coefficients for higher loads fell in between the two extreme values.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권6호
• /
• pp.30-39
• /
• 2016

이 연구에서는 고연성과 낮은 탄성계수를 갖는 PET 섬유로 보강한 철근콘크리트 보의 부착특성과 휨거동을 각각 부착실험 및 휨실험을 통하여 규명하고자 하였다. 부착실험은 CSA S806에 따라 수행하였고, 실험변수는 섬유 종류와 보강량(CF 및 GF 시트 각 1겹, PET 시트 10겹)이었다. 총 8개의 보 실험에서 주요 실험변수는 단면의 연성비(${\mu}=3.4$, 7.0), 보강섬유 종류(CF, GF, PET) 및 보강량이었다. 보 단면의 모멘트-곡율 해석을 병행하였다. 부착실험의 결과, CF, GF 시트 1겹 보강에서 유효 부착길이는 각각 120, 60 mm 이었고 최대부착응력은 각각 3.25, 2.99 MPa 이었다. PET 10겹 보강에서 유효 부착길이는 60 mm, 최대 및 평균 부착응력은 각각 2.30, 2.10 MPa 이었다. 또한 최대 강도 시 CF, GF, PET의 변형율은 각각 0.36%, 0.49%, 6.29% 였으며 CF, GF 부착실험체는 계면에서 시트가 최종적으로 탈락하였지만 PET 부착 실험체에서 박리현상은 나타나지 않았다. 휨실험의 결과, PET 10, 20, 30겹으로 보강한 RC 보의 휨강도, 휨강성이 모두 무보강 보에 비해 증가하였고, 연성적인 휨파괴 양상을 보였으나 PET 30겹의 경우 20겹에 비하여 연성이 감소하였다. 모멘트-곡율 해석의 결과, PET 보강 보에서 접착제의 물성을 해석에 포함시키면 해석의 정확도가 향상하였다. 한편 PET 의 내구성에 대해서는 보고된 문헌이 없어서 현재 연구 진행 중이다.

• 식물병연구
• /
• 제23권4호
• /
• pp.295-305
• /
• 2017

This study aimed to investigate the plant growth-promoting and biocontrol potential of a grass culture with Paenibacillus ehimensis KWN8 on tomato. For this experiment, treatments of a chemical fertilizer (F), a bacterial grass culture (G), a 1/3 volume of G plus 2/3 F (GF), and F plus a synthetic fungicide (FSf) were applied to tomato leaves and roots. The result showed that the severity of Alternaria solani and Botrytis cinerea symptoms were significantly reduced after the application of the bacterial grass culture (G and GF) and FSf. In addition, root mortality in G and GF was lower compared to F. Tomato plants treated with G or GF had better vegetative growth and yield compared to F. Application of G affected the fungal and bacterial populations in the soil. In conclusion, treatment with a bacterial grass culture decreased disease severity and increased tomato growth parameters. However, there were no statistically significant correlations between disease occurrence and tomato yields. This experiment presents the possibility to manage diseases of tomato in an environmentally friendly manner and to also increase the yield of tomato by using a grass culture broth containing P. ehimensis KWN38.

• 대한기계학회논문집A
• /
• 제36권8호
• /
• pp.851-856
• /
• 2012

마이크로 프로브 팁의 설계는 매우 복잡하고 많은 비용이 든다. 이 논문에서는 새로운 타입의 프로브 팁을 유한요소해석을 이용하여 설계하였다. 유한요소해석을 이용하여 설계를 함으로써 복잡한 설계과정을 단순화 할 수 있다. 우선, 기존 프로브 팁의 실험 결과를 이용하여 유한요소해석기법을 검증하였다. 기존 프로브 팁의 물성은 $100{\mu}m$의 압축 길이시 12.5 gf 의 접촉하중이 측정되었다. 본 연구에서는 새로운 타입의 프로브 팁을 제안하였다. 새로 설계된 프로브 팁의 재료는 NiCo 이며 프로브 팁의 물성은 $100{\mu}m$의 압축 길이시 1~2 gf 의 접촉하중을 나타내었다.

• 품질경영학회지
• /
• 제45권4호
• /
• pp.995-1002
• /
• 2017

Purpose: The purpose of this study was to evaluate the color stability of composite resins used for splinting teeth by comparing a self-cure resin cement (Superbond C&B, SB), a flowable composite resin (G-aenial Universal Flo A2, GU), and a composite resin exclusively used for splinting teeth (G-Fix, GF) before and after aging in NaOCl. Methods: Resin samples were fabricated to a size of 2 mm thickness and 8.5 mm diameter and light-cured with an LED light curing unit (G-Light, n = 12). Immediately after fabrication, CIE L*a*b* values of the resin samples were measured with a spectrophotometer (CM-5) as baseline. Then, the resin samples were immersed in 5% NaOCl at $60^{\circ}C$ and the color was measured after 23 hours every day for 4 days. Data were analyzed with one-way ANOVA followed by Duncan post hoc test (p<0.05), and color differences (${\Delta}E$) of resin samples before and after NaOCl aging were also calculated. Results: For SB, there were no changes in L* and a* values but changes were observed in b* values. For GU, there were no changes in L* and b* values but in a* values. For GF, changes were observed in L*, a*, and b* values. All resin samples showed highest ${\Delta}E$ between baseline and the 1st day of NaOCl immersion. ${\Delta}E$ of SB, GU, and GF was 4.6 - 5.8, 4.9 - 7.9, and 9.9 - 16.9, respectively. GF showed highest color change during NaOCl aging. Conclusion: The results of this color quality evaluation showed that the composite resin exclusively used for splinting teeth might be more vulnerable to color change during intraoral service.

• The Plant Pathology Journal
• /
• 제28권4호
• /
• pp.357-363
• /
• 2012

Several species belonging to the Gibberella fujikuroi species (Gf ) complex are commonly associated with rice and corn, not only causing serious diseases, but also producing fumonisins, a group of mycotoxins harmful to animals and humans. To characterize the population structure of the putative fumonisin-producing Gf complex in Korea, we obtained 276 candidate isolates from rice and corn harvested in 2009 and 2010 by diagnostic polymerase chain reaction with several specific primer sets. Phylogenetic trees were constructed using multilocus sequences (combined RPB2 and EF1A, totaling 1.6 kb) from these isolates. Among the 135 isolates from rice, F. fujikuroi (teleomorph: G. fujikuroi; 59.3%) and F. proliferatum (G. intermedia; 13.3%) were predominant, followed by F. concentricum (5.9%). Additionally, twenty-five (18.5%) rice isolates belonged in a distinct subclade of F. commune, a non-member of the Gf complex. In contrast, F. verticillioides was the most predominant species (38.3%) among the 141 corn isolates, and followed by F. fujikuroi (27.7%), F. proliferatum (14.9%), F. subglutinans (7.1%), and F. concentricum (2.8%). A single mating type (MAT1-1) was found predominantly among the Gf complex isolates examined. Possible distinct subclades were detected within the populations of F. fujikuroi and F. proliferatum; however, this needs further confirmation. This is the first reported population-level characterization of putative fumonisin-producing Gf complex associated with rice and corn in Korea.

• 한국통신학회논문지
• /
• 제10권3호
• /
• pp.147-152
• /
• 1985

Reed-Solomon 코드의 디코더를 error-trapping 방법으로 설계했다. (7.3) Reed Solomon 코드의 인코더 및 디코더 구성시 GF(8)의 소자는 3bit의 2진수로 표현했다. 하드-웨어 시험은 Apple-II(micro-computer)로 제어했으며, 인코딩하는데 걸린 시간은 $350\mu sec이었고, 디코딩하는데 걸린 시간은 910u sec이었다. 실험 결과 2개 이하의 랜덤 에러는 정정되었고, 그 보다 많은 에러는 정정되지 않았다. 또한 4bit의 binary burst에러도 역시 정정되었다. 그리고(7, 3) Reed-Solomon코드의 performance를 측정한 결과, 채널 에러가 10~10일때 에러 확률이 약 10~10정도로 감소되었다.