• Proceedings of the KSRS Conference
• /
• 대한원격탐사학회 2008년도 춘계학술대회 논문집
• /
• pp.25-28
• /
• 2008

본 논문에서는 GB-SAR의 간섭기법을 이용하여 물체의 변위 측정에 대한 정밀도를 조사하였으며, 또한 대기보정을 거친 후 정밀도의 변화에 대해서 확인하였다. GB-SAR 시스템에서 안테나는 중심주파수 5.3 GHz, 밴드 폭 600 MHz인 C밴드 안테나를 사용하였고, 신호의 증폭을 위해 마이크로파 앰프를, 다편파 측정 및 분석을 위하여 스위치를 장착하였다. 레일의 총 길이는 5 m, 이동간격은 5 cm, 최대 관측 거리는 약 200 m이다. 변위 측정에 사용된 이동산란체는 trihedral corner reflector로서, 시스템 전방 약 160 m에 위치하며 시스템 방향으로 1 mm에서 40 mm 전진시켰다. 이동산란체의 실제 변위와 GB-SAR 시스템의 위상변화로 관측된 변위의 상관계수는 편파에 따라 0.9995에서 0.9996으로 나타났다. 마이크로파의 전파과정에서 거리와 습도에 따른 지연 효과를 고려하기 위하여 대기보정식을 구하였으며, 이를 이동산란체의 위상에 적용한 결과 상관계수는 0.9997에서 0.9999의 값을 나타냈고 40 mm 이동시 오차가 1 mm 이내를 나타냄으로서 대기보정을 통한 결과가 더 높은 정밀도를 나타냄을 확인하였다.

• Solar Energy
• /
• 제19권3호
• /
• pp.125-131
• /
• 1999

This paper deals with a novel structure of poly-Si solar cell. A grain boundary(GB) of poly-Si acts as potential barrier and recombination center for photo-generated carriers. To reduce unwanted side effects at the GB of poly-Si, we employed physical GB removal of poly-Si using chemical solutions. Various chemical etchants such as Sirtl, Yang, Secco, and Schimmel were investigated for the preferential GB etching. Etch depth about 10 ${\mu}m$ was achieved by a Schimmel etchant. After a chemical etching of poly-Si, we used $POCl_3$ for emitter junction formation. This paper used an easy method of top electrode formation using a RF sputter grown ITO film. ITO films with thickness of 300 nm showed resistivity of $1.26{\times}10^{-4}{\Omega}-cm$ and overall transmittance above 80%. Using a preferential GB etching and ITO top electrode, we developed a new fabrication procedure of poly-Si solar cells. Employing optimized process conditions, we were able to achieve conversion efficiency as high as 16.6% at an input power of 20 $mW/cm^2$. This paper investigates the effects of process parameters: etching conditions, ITO deposition factors, and emitter doping densities in a poly-Si cell fabrication procedure.

• The Journal of Korean Medicine
• /
• 제31권3호
• /
• pp.66-78
• /
• 2010

Background: Peripheral nerve injuries are a commonly-encountered clinical problem and often result in a chronic pain and severe functional deficits. Objectives: The aim of this study was to evaluate the effects of acupuncture on the descending pain and the recovery of the locomotor function that follows sciatic crushed nerve injury in rats. Method: In order to assess the effects of acupuncture on the descending pain and functional recovery, we investigated the walking track analysis, brain-derived neurotrophic factor (BDNF) and its receptor tyrosine receptor kinase B (TrkB) expression in the sciatic nerve, and on the expressions of c-Fos and nitric oxide synthase in the paraventricular nucleus (PVN) of the hypothalamus and in the ventrolateral periaqueductal gray (vlPAG) region resulting from sciatic crushed nerve injury in rats. Results: Acupuncture treatment at Huantiao (GB30), Yanglingquan (GB34), and Weizhong (BL40) facilitated functional recovery. C-Fos and nitric oxide synthase expressions in the brain and BDNF and TrkB expressions in the sciatic nerve were decreased by acupuncture treatment. The most potent effects of acupuncture were observed at the GB30 acupoint. Conclusion: It is possible that acupuncture can be used for pain control and functional recovery from sciatic nerve injury.

• ETRI Journal
• /
• 제37권6호
• /
• pp.1120-1128
• /
• 2015

We propose a pseudo optical N-level pulse-amplitude modulation (PO PAM-N) signal using a few externally-modulated lasers (EMLs) operating at different wavelengths, which is suitable for upgrading the transmission speed over an optical link of < 10 km single-mode fiber with low-cost components. To compare a PO PAM-N signal with that of a standard optical PAM-N signal, we perform experiments for evaluating the performance of a 51.56-Gb/s PO PAM-4 signal and standard 51.56-Gb/s optical PAM-4 signal. The receiver sensitivity (at $BER=10^{-5}$) of the PO PAM-4 signal is 1.5 dB better than the receiver sensitivity of a standard optical PAM-4 signal. We also investigate the feasibility of PO PAM-N (N = 4, 8, and 16) signals operating at 103.12 Gb/s, considering relative intensity noise, timing jitter, extinction ratio (ER) of EMLs, and dispersion. From the results, a PO PAM-8 signal performs better than PO PAM-4 and PO PAM-16 signals at 103.12 Gb/s. Finally, we suggest a timing control method to suppress the effect of dispersion in a PO PAM-N signal. We show that the tolerance to dispersion of a 103.12-Gb/s PO PAM-8 signal can be improved to ${\pm}40ps/nm$ by applying a proposed scheme.

• ETRI Journal
• /
• 제31권6호
• /
• pp.749-754
• /
• 2009

The design and performance of an InGaAs/InP transimpedance amplifier and post amplifier for 40 Gb/s receiver applications are presented. We fabricated the 40 Gb/s transimpedance amplifier and post amplifier using InGaAs/InP heterojunction bipolar transistor (HBT) technology. The developed InGaAs/InP HBTs show a cut-off frequency ($f_T$) of 129 GHz and a maximum oscillation frequency ($f_{max}$) of 175 GHz. The developed transimpedance amplifier provides a bandwidth of 33.5 GHz and a gain of 40.1 $dB{\Omega}$. A 40 Gb/s data clean eye with 146 mV amplitude of the transimpedance amplifier module is achieved. The fabricated post amplifier demonstrates a very wide bandwidth of 36 GHz and a gain of 20.2 dB. The post-amplifier module was fabricated using a Teflon PCB substrate and shows a good eye opening and an output voltage swing above 520 mV.

• Journal of the Korean Ceramic Society
• /
• 제56권5호
• /
• pp.506-512
• /
• 2019

Although graphene has been successfully grown in large scale via chemical vapor deposition (CVD), it is still questionable whether the mechanical properties of CVD graphene are equivalent to those of exfoliated graphene. In addition, there has been an issue regarding how the tilt angle of the grain boundary (GB) affects the strength of graphene. We investigate the mechanical properties of CVD graphene with nanoindentation from atomic force microscopy and transmission electron microscopy. Surprisingly, the samples with GB angles of 10° and 26° yielded similar fracture stresses of ~ 80 and ~ 79 GPa, respectively. Even for samples with GB exhibiting a wider range, from 0° to 30°, only a slightly wider fracture stress range (~ 50 to ~ 90 GPa) was measured, regardless of tilt angle. The results are contrary to previous studies that have reported that GBs with a larger tilt angle yield stronger graphene film. Such a lack of angle dependence of GB can be attributed to irregular and well-stitched GB structures.

• Journal of Acupuncture Research
• /
• 제25권5호
• /
• pp.59-68
• /
• 2008

Objectives : The purpose of this study is to investigate the effects of $GB_{41}$ supplementation and $BL_{66}$ draining on changes in cerebral blood flow in normal rats. Methods : Regional cerebral blood flow(rCBF) and mean arterial blood pressure(MABP) in normal rats are observed, and those mechanisms were also investigated with pre-treatment of indomethacin(IDM) and methylene blue(MTB) each. Results : In this study, $GB_{41}$ supplementation and $BL_{66}$ draining elevated rCBF in time-dependent manner. Pre-treatment with indomethacin(IDM), an inhibitor of cyclooxygenase, inhibited increase of rCBF effectively. But pre-treatment with methylene blue(MTB), an inhibitor of guanylate cyclase, didn't affect rCBF levels. In addition, pre-treatment with IDM also decreased MABP levels. Conclusions : In conclusion, these results suggest that $GB_{41}$ supplementation and $BL_{66}$ draining is effective to increase rCBF, and the mechanisms are thought to be related to cyclooxygenase pathways.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1587-1592
• /
• 2021

The effects of the symmetrical tilt Σ5 (310) <001> grain boundary (GB) on the evolution of radiation-induced point defects in pure δ-plutonium (Pu) were studied by Molecular dynamics (MD) simulations. The evolution of radiation-induced point defects was obtained when primary knock-on atom (PKA) was respectively set as -15 Å and 15 Å far from the GB and the number of residual defects was obtained as the distance from PKA to GB was changed. According to the results, compared with vacancies, interstitial atoms were more easily absorbed by GB. In addition, the formation energy of point defects was also calculated. The results showed that there was almost no difference for the formation energy of vacancies in the all matrix. However, the formation energy of interstitial atoms close to the GB was lower than that in the other bulk regions.

• Corrosion Science and Technology
• /
• 제20권3호
• /
• pp.105-111
• /
• 2021

In oxidizing nitric acid solutions, stainless steel undergoes intergranular corrosion accompanied by grain dropping and changes in the corrosion rate. For the safe operation of reprocessing plants, this mechanism should be understood. In this study, we constructed a three-dimensional computational model using a cellular automata method to simulate the intergranular corrosion propagation of stainless steel. The computational model was constructed of three types of cells: grain (bulk), grain boundary (GB), and solution cells. Model simulations verified the relationship between surface roughness during corrosion and dispersion of the dissolution rate of the GB. The relationship was investigated by simulation applying a constant dissolution rate and a distributed dissolution rate of the GB cells. The distribution of the dissolution rate of the GB cells was derived from the intergranular corrosion depth obtained by corrosion tests. The constant dissolution rate of the GB was derived from the average dissolution rate. Surface roughness calculated by the distributed dissolution rates of the GBs of the model was greater than the constant dissolution rates of the GBs. The cross-sectional images obtained were comparable to the corrosion test results. These results indicate that the surface roughness during corrosion is associated with the distribution of the corrosion rate.

• Journal of Korean Medicine Rehabilitation
• /
• 제33권2호
• /
• pp.95-103
• /
• 2023

The objective of this study was to assess the effectiveness of GB12 (Wangu) acupoint for dizziness. This study retrospectively analyzed the electronic medical records of 12 hospitalized patients complaining of dizziness were treated 5 times a week with a combined Korean medicine treatment including Jungsongouhyul pharmacopuncture on bilateral GB12 (Wangu) acupoint, and dizziness was evaluated by using a numerical rating scale (NRS). As a result of medical record analysis, NRS of 12 patients was significantly decreased after treatment (p<0.001), and no adverse events were reported in all 12 cases. We suggest that the treatment of GB12 (Wangu) could be effective in patients with dizziness, and to obtain exact evidence of effectiveness, further studies are needed.